Metra AX-MAZCAM-6V Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra AX-MAZCAM-6V (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
AX-MAZCAM-6V AX-MAZCAM-6V
REV. 8/28/18 REV. 8/28/18© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com Integrate • AxxessInterfaces.com
INSTALLATION INSTRUCTIONSINSTALLATION INSTRUCTIONS
INTERFACE FEATURES
• Retains the factory backup camera to an aftermarket radio
• Allows an aftermarket camera to be added to the factory screen
• Includes the AX-CAM6V 12-volt to 6-volt converter
INTERFACE COMPONENTS
• AX-MAZCAM-6V harness • AX-CAM6V 12-volt to 6-volt converter
Mazda Backup Camera Retain/Add-On
2007-2015
MAZDA
CX-5 2013-2015
CX-7 2007-2012
CX-9 2007-2015
Mazda6 2011-2015
• Wire cutter • Crimping tool • Solder gun • Tape
• Connectors (example: butt connectors, bell caps, etc.)
APPLICATIONS
TOOLS REQUIRED
CAUTION!
All accessories, switches, climate controls panels, and especially air bag indicator lights must
be connected before cycling the ignition. Also, do not remove the factory radio with the key in the on
position, or while the vehicle is running.
K PNOWLEDGE IS OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and spected re
mobile elect nics school in our industry.ro
Log onto www.installerinstitute.com or call
800-354-6782 for mo information and take steps re
toward a better tomorrow.
®
Metra recommends MECP
certified technicians
Connections to be made
The AX-MAZCAM-6V can be connected two different ways
To retain the factory backup camera to an aftermarket radio:
Connect the wire to chassis ground, and also to the wire of the AX-CAM6V.Black Black
Connect the Yellow Blue/Red wire to the wire of the AX-CAM6V.
Connect the reverse wire from the aftermarket radio, to the reverse signal in the vehicle,
and also to the wire of the AX-CAM6V.Blue/White
Connect the
male
Yellow RCA jack to the rear camera input of the aftermarket radio.
To allow an aftermarket camera to be added to the OEM screen:
Connect the
female
Yellow RCA jack to the aftermarket camera.
The AX-CAM6V 12-volt to 6-volt converter will not be used in this application.
Tape off and disregard the following (2) wires, they will not be used in this application;
Black Yellow,
IMPORTANT
If you are having difficulties with the installation of this product, please call our Tech Support
line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make
sure the installation was performed exactly as the instructions are stated. Please have the
vehicle apart and ready to perform troubleshooting steps before calling.
AX-MAZCAM-6V AX-MAZCAM-6V
REV. 8/28/18 REV. 8/28/18© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com Integrate • AxxessInterfaces.com
INSTRUCCIONES DE INSTALACIÓNINSTRUCCIONES DE INSTALACIÓN
Conexiones que se deben hacer
El AX-MAZCAM-6V puede conectarse de dos maneras distintas
Para retener lamara de reversa de fábrica para un radio de mercado secundario:
Conecte el cable a la tierra del chasis, y también para el cable del AX-CAM6V.negro negro
Conecte el cable al cable amarillo azul/rojo del AX-CAM6V.
Conecte el cable de marcha ats del radio de mercado secundario, a la señal
de marcha atrás en el vehicle, y también para el cable de la AX-CAM6V.azul/blanco
Conecte el conector RCA
macho
amarillo RCA en la entrada de lamara de reversa del radio
de mercado secundario.
Para permitir que se añada una cámara de mercado secundario a la pantalla
de equipo original:
Conecte el conector RCA
hembra
amarillo a lamara de mercado secundario.
El AX-CAM6V 12 voltios al convertidor de 6 voltios no se utilizará en esta solicitud.
®Metra recomienda técnicos
con certificación del Programa
de Certificación en Electrónica
Móvil (Mobile Electronics
Certification Program, MECP).
EL CONOCIMIENTO ES PODER
Mejore sus habilidades de instalación y
fabricación inscribiéndose en la escuela de
dispositivos electrónicos móviles más reconocida
y respetada de nuestra indust ria. Regístrese en
www.inst allerinstitute.com o llame al
800-354-6782 para obt ener más información y
avance hacia un futuro mejor.
IMPORTANTE
Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte
técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez
y asegúrese de que la instalación se haya realizado exactamente como se indica en las
instrucciones. Por favor tenga el vehículo desarmado y listo para ejecutar los pasos de
resolución de problemas antes de llamar.
CARACTERÍSTICAS DE LA INTERFASE
• Retiene la cámara de reversa de fábrica para un radio de mercado secundario
• Permite que se añada una cámara de mercado secundario a la pantalla de fábrica
• Incluye el AX-CAM6V de 12 voltios al convertidor de 6 voltios
COMPONENTES DE LA INTERFASE
• Arnés AX-MAZCAM-6V • AX-CAM6V 12 voltios al convertidor de 6 voltios
Mazda Retener/añadir cámara de reversa
2007-2015
MAZDA
CX-5 2013-2015
CX-7 2007-2012
CX-9 2007-2015
Mazda6 2011-2015
• Cortacables • Ponchadora • Pistola soldadora • Cinta
• Conectores (ejemplo: conectores de extremo, de campana, etc.)
APLICACIONES
HERRAMIENTAS REQUERIDAS
¡PRECAUCIÓN!
Todos los accesorios, interruptores, paneles de controles de clima y especialmente las
luces del indicador de las bolsas de aire deben estar conectados antes ciclar la ignición. Además, no
quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando.


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: AX-MAZCAM-6V

Heb je hulp nodig?

Als je hulp nodig hebt met Metra AX-MAZCAM-6V stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd