Metra 99-8239B Handleiding
Metra
Niet gecategoriseerd
99-8239B
Bekijk gratis de handleiding van Metra 99-8239B (8 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 62 mensen en kreeg gemiddeld 5.0 sterren uit 31.5 reviews. Heb je een vraag over Metra 99-8239B of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8
METRA. The World’s best kits.™metraonline.com © COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
REV. 8/17/2015 INST99-8239B
Installation instructions for part 99-8239B
CAUTION!
Metra recommends disconnecting the negative bat
-
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con
-
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
• ISO DIN radio provision with pocket
• Painted Matte Black
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips pan head screws
• E) (2) #8 x 3/8 Phillips truss head screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1761
Antenna Adapter: • 40-LX11
• Panel removal tool • Phillips screwdriver • Socket wrench
TOOLS REQUIRED
Dash Disassembly ................................................. 2
Kit Assembly
– ISO DIN radio provision with pocket 3 ......................
Table of Contents
A B C D E
99-8239B
1. Unclip and remove the trim panel
from around the radio including the
hazard switch. (Figure A)
2. Remove (4) 8mm bolts securing
the factory radio, then unplug and
remove the radio. (Figure B)
Continue to kit assembly
Dash Disassembly
(Figure A) (Figure B)
99-8239B
Kit Assembly
ISO DIN radio provision with pocket
1. Secure the to the radio brackets radio
trim panel using (2) #8 x 3/8” Phillips
truss head screws supplied. (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Secure the radio to the radio-bracket/
trim assembly using screws supplied
with the radio. (Figure B)
4.
Secure the pocket to the radio-bracket/
trim assembly using (4) #8 x 3/8” Phillips
pan head screws supplied. (Figure B)
5. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Re-connect the negative
battery terminal and test the radio for
proper operation.
6. Reassemble the dash in reverse order
of disassembly.
(Figure A) (Figure B)
Product specificaties
| Merk: | Metra |
| Categorie: | Niet gecategoriseerd |
| Model: | 99-8239B |
Heb je hulp nodig?
Als je hulp nodig hebt met Metra 99-8239B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Metra
17 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
3 Juni 2025
2 Mei 2025
2 Mei 2025
2 Mei 2025
Handleiding Niet gecategoriseerd
- EISL
- Best Service
- TDK-Lambda
- Macally
- Beemoo
- Rossi
- BT
- CaterCool
- TCL
- Krontaler
- Enttec
- Bogen
- Energy Sistem
- Polaroid
- Cabstone
Nieuwste handleidingen voor Niet gecategoriseerd
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025