Metra 82-7403 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 82-7403 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
1. Use two (2) screws to secure speaker adaptor bracket
to a stationary surface that can be used as a backup
for drilling (Figure 1).
2. Choose a hole saw to match the opening size for the
tweeter to be installed. Using the in the center dimple
of the bracket as the center for the hole, cut out
opening for the tweeter (Figure 2).
Note: Depending on the application, some tweeters
can be surface mounted to the adaptor bracket without
drilling.
3. Remove screws and remove bracket from backup
surface.
4. Secure tweeter to adaptor bracket using the method
described and hardware supplied with the tweeter
purchased. Additional drilling may be required.Note:
5. Make connections to vehicle speaker wires and
secure speaker/bracket assembly to location (Figure 3).
Speaker Adaptor Bracket
Tools Required
120 82-7403
Phillips
Screwdriver
Parts
Supplied:
(2) Brackets
Revision 07/13/21
*120827403*
6
It may be necessary to acquire screws to mount the speaker/
bracket assembly to the location.
IMPORTANT
!
Copyright 2021 Crutchfield Corporation
IMPORTANT
Before starting, compare items on your invoice with items
received. Thoroughly check packing materials. If an item
is missing, please call Crutchfield at 1-888-955-6000.
FIGURE 3FIGURE 1
FIGURE 2
Speaker Adaptor Br
Speaker Adaptor Br
Speaker Adaptor Br
Speaker Adaptor Bracket
acket
acket
acketSpeaker Adaptor Bracket
Dimple
Dimple
Dimple
DimpleDimple
Drill &
Hole Saw


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 82-7403

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 82-7403 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd