Metra 99-7820B Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-7820B (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/7/18 INST99-7820B
I N S TA L L A T I O N I N S T R U C T I O N S
99-7820B
KIT FEATURES
ISO DIN radio provision with pocket
Painted matte black
KIT COMPONENTS
• A) Radio housing • B) Radio brackets • C) Pocket • D) (8) #8 x 3/8” Phillips screws TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: Please visit metraonline.com for
wiring harness options
Antenna Adapter: Please visit metraonline.com
for antenna adapter options
A B C D
Acura MDX 2007-2013
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Open the passenger door, then unclip
and remove the panel on the side of the
dashboard. Remove (1) Phillips screw
exposed. (Figure A)
2. Unclip and remove the dashboard trim
panel above the glovebox. (Figure B)
3. Unclip and remove the dashboard trim
panel between the steering column and
the radio. (Figure B)
4. Remove (4) screws securing the radio.
Slide the radio out, then unplug and
remove the radio. (Figure C)
Continue to Kit Assembly
(Figure A) (Figure C)
(Figure B)
REV. 5/7/2018 INST99-7820B 3
1. Secure the radio brackets to the radio
housing using the (4) #8 x 3/8” Phillips
screws provided. (Figure A)
2. Slide the pocket into the bracket/
housing assembly, and then secure it
using the (4) #8 x 3/8” Phillips screws
provided. (Figure B)
3. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
4. Slide the radio into the bracket/housing/
pocket assembly, then secure it using
the screws supplied with the radio.
(Figure C)
5. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or Axxess. Test the radio for
proper operation.
6. Secure the radio assembly to the dash
using the factory screws.
7. Reassemble the dash in reverse
order of disassembly to complete the
installation.
(Figure C)(Figure A)
(Figure B)
KIT ASSEMBLY


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 99-7820B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-7820B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd