Metra 99-7356B Handleiding

Metra Carkit 99-7356B

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-7356B (8 pagina's) in de categorie Carkit. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
APPLICATIONS
REV. 11/14/2017 INST99-7356B
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Table of Contents
INSTALLATION INSTRUCTIONS FOR PART 99-7356B U.S. PATENT # D725,095
METRA. The World’s best kits.®metraonline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
• ISO DIN radio provision with pocket
Painted matte black
A) Radio Trim Panel B) Brackets • C) Pocket • D) (6) #8 x 3/8” Phillips Screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7304
Antenna Adapter: • Not Required
• Panel removal tool • Phillips screwdriver
TOOLS REQUIRED
A CB D
Dash Disassembly
Kia Forte 2014-up 2 ................................................
Kit Assembly
ISO DIN radio provision with pocket 3 ......................
99-7356B
1. Unsnap and remove the small trim
below the climate controls, then
remove one Phillips screw from the
radio trim panel. (Figure A)
2. Unsnap and remove the radio trim
panel. (Figure B)
3. Remove the panel clips from the
factory radio, save them for the
kit assembly.
4. Unscrew the factory hazard button,
save it for the kit assembly.
5. Remove four Phillips screws to
remove the factory radio.
Continue to kit assembly
Dash Disassembly
(Figure A) (Figure B)
99-7356B
Kit Assembly
(Figure B) (Figure C)
(Figure A)
ISO DIN radio provision
1. Attach the factory panel clips to
the radio housing (Figure A)
2. Attach the factory hazard button to
the radio trim panel with (2) of the
#8 x 3/8” screws provided.
(Figure A)
3. Attach the pocket to the radio
brackets with (4) of the #8 x 3/8”
screws provided. (Figure B)
4. Slide the radio into the radio
brackets/pocket assembly and
secure with the screws supplied
with the radio. (Figure C)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
6. Snap the radio trim panel over the
new radio and reassemble dash in
reverse order of disassembly.


Product specificaties

Merk: Metra
Categorie: Carkit
Model: 99-7356B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-7356B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Carkit Metra

Handleiding Carkit

Nieuwste handleidingen voor Carkit