Havis C-TTB-CV Handleiding
Bekijk gratis de handleiding van Havis C-TTB-CV (2 pagina’s), behorend tot de categorie Carkit. Deze gids werd als nuttig beoordeeld door 58 mensen en kreeg gemiddeld 4.3 sterren uit 29.5 reviews. Heb je een vraag over Havis C-TTB-CV of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2

INSTALL INSTRUCTIONS C- - TTB CV
HALF SIZE TRUNK TRAY
1995-2009 FORD CROWN VICTORIA
TOOLS REQUIRED:
Ratcheting wrench
Sockets - 7/16”, #10, #8
Screwdriver set
Wrench – 7/16”
HARDWARE:
ITEM# QTY DESCRIPTION PART #
1 1 Passenger side front foot S-1-000958
2 1 Driver side front foot S-1-000959
3 1 Support plate S-1-000964
4 1 Driver side rear foot S-1-TA001HBS1-006A
5 1 Passenger side rear foot S-1-TA001HBS1-006B
11 GSM31005 ¼” Flat washer
11 GSM30023 ¼” Serrated nut
5 GSM33001 ¼” x ¾” Hex head bolt
4 8-32 Keps nut GSM30027
Always!
Read all instructions before installing any Havis, Inc. products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
1
2
3
5
4
(Attaches w/ 8-32 keps nuts)
(Attaches w/ ¼” serrated nuts)
(Attaches w/ ¼” serrated nuts)
(Attaches w/ 8-32 keps nuts)
(Bolts to back seat wall)

C- -CV_INST_6- 6- TTB 09 09
INSTALL INSTRUCTIONS: (refer to drawing on previous page)
1. Remove spare tire and jack from trunk.
2. Slide tray into the top shelf of the trunk.
3. Loosely attach (items #1 & 2) front mounting feet to the tray, using ¼” x ¾” Hex
head bolts, washers, and nylock nuts.
4. Loosely attach front mounting feet to the vehicle, using ¼” x 1” Hex head bolts,
washers, and nylock nuts.
NOTE: Use backing plate for additional support on forward side of seat strainer.
5. Loosely attach (items #4 & 5) driver/passenger side rear mounting feet to the tray,
using ¼” x ¾” Hex head bolts, washers, and nylock nuts.
6. Loosely attach (items #4 & 5) driver/passenger side rear mounting feet to the vehicle,
using ¼” x 1” Hex head bolts, washers, and nylock nuts.
7. Check to see if tray opens and closes smoothly.
8. Tighten all hardware.
Product specificaties
Merk: | Havis |
Categorie: | Carkit |
Model: | C-TTB-CV |
Kleur van het product: | Zwart |
Compatibele producten: | 1995-2011 Ford Crown Victoria |
Heb je hulp nodig?
Als je hulp nodig hebt met Havis C-TTB-CV stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Carkit Havis
27 Mei 2024
27 Mei 2024
27 Mei 2024
27 Mei 2024
27 Mei 2024
27 Mei 2024
27 Mei 2024
27 Mei 2024
27 Mei 2024
27 Mei 2024
Handleiding Carkit
- WAGAN
- Jensen
- Pioneer
- Cobra
- Silvercrest
- Medion
- Nite Ize
- Thule
- PNI
- Brodit
- Livoo
- Nokia
- Arkon
- Uniden
- Avantalk
Nieuwste handleidingen voor Carkit
3 Juni 2025
3 Juni 2025
3 Juni 2025
2 Juni 2025
19 Mei 2025
7 Mei 2025
27 April 2025
3 April 2025
3 April 2025
3 April 2025