Metra 95-7361S Handleiding

Metra Carkit 95-7361S

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 95-7361S (8 pagina's) in de categorie Carkit. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
METRA. The World’s best kits.metraonline.com1-800-221-0932 © COPYRIGHT 2014 METRA ELECTRONICS CORPORATION
REV. 11/25/2014 INST95-7361S
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Installation Instructions for 95-7361S
• ISO DDIN radio provision
Painted silver
A) Radio housing trim panel • B) Brackets • C) (4) #8 x 3/8” Phillips screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7303
Antenna Adapter: • 40-KI11
• Panel removal tool • Phillips screwdriver
TOOLS REQUIRED
(with factory NAV)
A B C
Dash Disassembly
Hyundai Santa Fe 2010-2012(w/factory NAV) ....... 2
Kit Assembly
ISO DDIN radio provision ...................................... 3
Table of Contents
95-7361S
Dash Disassembly
1. Remove (1) Phillips screw from the
right side of the panel below the
steering column then unclip and let
right side of panel hang. (Figure A)
2. Unclip and remove the cover
above the clock on top of panel
surrounding the radio. (Figure B)
3. Unclip and remove the panel
extending across the dash below
the a/c control and above the
glove box including the ash tray.
(Figure C)
4. Remove (2) Phillips screws then
unclip and remove the panel
surrounding the radio including the
A/C vents. (Figure D)
5. Remove (4) Phillips screws
securing the radio. Unplug and
remove radio.
6. Remove the (3) switches from the
factory radio and snap them into
the Metra radio housing.
Continue to kit assembly (Figure C) (Figure D)
(Figure A) (Figure B)
95-7361S
Kit Assembly
ISO DDIN radio provision
1. Connect the radio brackets to
the radio housing with (4)
#8 x 3/8” Phillips screws supplied.
(Figure A)
2. Slide the radio into the assembly
and secure with screws supplied
with the radio. (Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
4. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.
(Figure A) (Figure B)


Product specificaties

Merk: Metra
Categorie: Carkit
Model: 95-7361S

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 95-7361S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Carkit Metra

Handleiding Carkit

Nieuwste handleidingen voor Carkit