Metra 95-8225G Handleiding

Metra Carkit 95-8225G

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 95-8225G (8 pagina's) in de categorie Carkit. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
METRA. The World’s best kits.™metraonline.com1-800-221-0932 © COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
REV. 7/22/2014 INST95-8225G
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
INSTALLATION INSTRUCTIONS FOR PART 95-8225G
• A) Double DIN trim plate
KIT COMPONENTS
• Double DIN radio provision
• Painted to match factory dash, G = Gray
KIT FEATURES
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1761 - 1987-up Toyota harness • TYTO-01 - 2003-up Toyota JBL • AX-LCD
Antenna Adapter: • 40-LX11 (2013-up only)
• Panel removal tool • Phillips screwdriver • Socket wrench • Small flat blade screwdriver
• Magnetized universal swivel headsocket adapter
TOOLS REQUIRED
A
Dash Disassembly
– Toyota Venza 2009 ............................................ 2
Kit Assembly
– Double DIN radio provision............................... 3
Table of Contents
95-8225G
1. Unclip and remove the trim panel
to the right of the shifter. (Figure A)
2. Remove (1) Phillips screw from
the bottom of the climate control
then unclip and remove the climate
control. (Figure B)
3. Remove (4)10 mm bolts securing
the radio. (Figure C)
Note: You will need a universal
swivel head socket adapter to get
to the bottom left bolt.
4. Remove (4) Phillips screws
securing the factory radio to the
A/C vent panel. (Figure D))
Continue to kit assembly
Dash Disassembly
(Figure B) (Figure D)
(Figure A) (Figure C)
RADIO
Rear view - Radio and A/C vent panel
Radio
95-8225G
Kit Assembly
Double DIN radio provision
1. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the radio for
proper operation.
2. Secure the double DIN trim plate into
the factory A/C vent panel using the
factory hardware. (Figure A)
3. Attach the factory radio brackets to
the double DIN radio with the screws
supplied with the radio. (Figure B)
4. Secure the aftermarket radio into the
dash using (4)10 mm bolts. (Figure C)
5. Snap the factory vent panel/double DIN
trim plate over radio. (Figure D)
6. Reassemble the remaining radio
and dash assemblies in reverse order
of disassembly.
(Figure B) (Figure D)
(Figure A) (Figure C)
Rear view - A/C vent panel


Product specificaties

Merk: Metra
Categorie: Carkit
Model: 95-8225G

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 95-8225G stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Carkit Metra

Handleiding Carkit

Nieuwste handleidingen voor Carkit