McIntosh XRT2.1K Handleiding

McIntosh Speaker XRT2.1K

Lees hieronder de 📖 handleiding in het Nederlandse voor McIntosh XRT2.1K (20 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20

McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com

XRT2.1K

Left and Right

Loudspeaker System

Owner’s Manual

Caution: The XRT2.1K weight is 353.2 pounds

(160.2 kg). It requires four or more per-

sons to safely handle the Loudspeaker

System.

1. For additional connection information, refer to the

owner’s manual(s) for any component(s) connected

to the XRT2.1K Left and Right Loudspeakers.

2. The design of the XRT2.1K Loudspeaker took into

account the acoustic characteristics of the Front

Panel Grille and it should be attached to the Loud-

speaker for the best sonic performance.

3. If there is an obvious lack of high, mid or low

frequencies after extended periods of overdrive,

the Protection Device(s) may have activated. These

devices will automatically reset when the volume

level is greatly reduced until the output of the af-

fected Loudspeaker Driver(s) returns to normal.

4. If it should become necessary to replace the sup-

plied Input Terminal Connection Jumper Cables,

order part number 320633SP from the McIntosh

Parts Department:

5. When discarding the unit, comply with local rules

or regulations. Batteries should never be

thrown away or incinerated but disposed

of in accordance with the local regulations

concerning battery disposal.

6. For additional information on the XRT2.1K and

other McIntosh Products please visit the McIntosh

Web Site at www.mcintoshlabs.com.

XRT2.1K Loudspeaker Unpacking Information

Guide

(Separate Sheet in all three Shipping Cartons)

Safety Instructions ..................................................... 2

(Separate Sheet) ................... Important Additional

Operation Information Guide

Thank You and Please Take a Moment 2 ......................

Technical Assistance and Customer Service 2 .............

Table of Contents, General Information 2 ....................

Connector Information .............................................. 3

Introduction 3 ...............................................................

Dimensions ............................................................. 4-5

Assembling the Loudspeaker .................................. 6-8

Installation ................................................................. 9

How to Connect using a single Amplifier ...........10-11

How to Connect using two Amplifiers

and Room Correction Equalizer ....................... 12-13

How to Connect using a three Amplifiers ...........14-15

Specifications .......................................................... 16

Packing Instruction ............................................ 18-19

Table of Contents

Thank You

Please Take A Moment

Technical Assistance

If at any time you have questions about your McIntosh

product, contact your McIntosh Dealer who is familiar

with your McIntosh equipment and any other brands

that may be part of your system. If you or your Dealer

wish additional help concerning a suspected problem,

you can receive technical assistance for all McIntosh

products at:

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, New York 13903

Phone: 607-723-3512

Fax: 607-724-0549

Customer Service

If it is determined that your McIntosh product is in

need of repair, you can return it to your Dealer. You

can also return it to the McIntosh Laboratory Service

Department. For assistance on factory repair return

procedure, contact the McIntosh Service Department

at:

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, New York 13903

Phone: 607-723-3515

Fax: 607-723-1917

The serial number, purchase date and McIntosh Dealer

name are important to you for possible insurance

claim or future service. The spaces below have been

provided for you to record that information:

Serial Number: _______________________________

Purchase Date: _______________________________

Dealer Name: ________________________________

General Information

Your decision to own this McIntosh XRT2.1K Left

and Right Loudspeaker System ranks you at the very

top among discriminating music listeners. You now

have “The Best.” The McIntosh dedication to “Qual-

ity,” is assurance that you will receive many years of

listening enjoyment from this unit.

Please take a short time to read the information in

this manual. We want you to be as familiar as pos-

sible with all the features and functions of your new

McIntosh.

Important Safety Information is supplied in a separate document “Important Additional Operation Information Guide”

The resistors used

in the crossovers have

a built-in heatsink to

maintain their resis-

tance values while at

the same time handles

high power levels.

The crossover net-

work also employs self

resetting high current

PTC type fuses to pro-

vide an extra measure

of protection for the

Loudspeaker Drivers.

The enclosure is

an important part of

the XRT2.1K Loud-

speaker System. It has

multiple front to back

and side to side inter-

nal braces to form a

dampened rigid Loud-

speaker enclosure.

The Loudspeaker’s

small footprint allows

for a variety of differ-

ent placements in a

room.

Power Control Connector

The Power Control Output Jack sends Power On/

Off Signals (+12 Volt/0 Volt) when

another McIntosh Component is

connected. A 3.5mm stereo mini

phone plug is used for connection to

the Power Control Output.

Input Terminal Connector

When cables with spade lugs are used

for Loudspeaker Connection, the spade

lugs need an opening of at least 3/10 inch

(7.6mm).

Connector/Cable Information

McIntosh Acoustic Engineers have achieved a very

high level of acoustic performance in the Asymmetri-

cal design of the XRT2.1K Left and Right Loudspeak-

er System which is based upon the last three and one-

half decades of Loudspeaker Systems. The XRT2.1K

provides superior spaciousness sound reproduction

with unusual sound stage depth in a

full range system.

The XRT2.1K utilizes Forty-Five

3/4 of an inch Alu-Magnesium Al-

loy Dome Tweeters. Refer to figure

1. There are Twenty-Eight 2 inch

Alu-Magnesium Alloy Cone Upper

Frequency Midranges. Refer to figure

2. Since the audio power is distributed

among all the drivers, each driver

does not have to work as hard, result-

ing in greater power handling capabil-

ity, dramatic reduction in distortion

and greater dynamic range.

Introduction

The Low Frequency Mid-

range Driver Section of the

System consists of Two newly

designed 6.5 inch Long-Throw

Nanocarbon Fiber/Nomex/ Hon-

eycomb Fiber Sandwich Cone.

Refer to figure 3.

The Low Frequency Section

consists of Six 8 inch, Long-

Throw, Nanocarbon Fiber/Hon-

eycomb Fiber Sandwich Cone

Woofers.

Refer to

figure 4.

The

Crossover

Network

used in the

XRT2.1K

Loud-

speaker

System is

designed

to ensure an even frequency response over the entire

audible range. The Crossover Network utilizes Ca-

pacitors and Inductors with high performance and

high current capacity. Refer to figures 5, 6 and 7.

The XRT2.1K uses low loss (DCR) Inductors in the

crossover network. The type of Inductor used in each

section of the crossover network has been chosen with

special metallic cores for high linearity, even at high

power levels. This prevents distortion of the music at

any frequency. The Capacitors used are a special type

with oil cores between its metal plates which handles

high power, high voltage and prevents arcing to im-

prove the acoustic sound quality.

Introduction

Figure 1

Figure 2

Figure 3

Figure 4

Power

Control

Ground

N/C

3/10 of an inch

(7.6millimeters)

Figure 5

Figure 6

Figure 7

Product specificaties

Merk:	McIntosh
Categorie:	Speaker
Model:	XRT2.1K

Heb je hulp nodig?

Als je hulp nodig hebt met McIntosh XRT2.1K stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker McIntosh

McIntosh XRT2.1K Handleiding

3 April 2024

McIntosh ML1 Handleiding

17 Augustus 2023

McIntosh CS100 Handleiding

26 April 2023

McIntosh LCR80 Handleiding

21 April 2023

McIntosh XCS1.5K Handleiding

18 April 2023

McIntosh XRT2K Handleiding

18 Maart 2023

McIntosh XR100 Handleiding

10 Februari 2023

McIntosh RS100 Handleiding

10 Februari 2023

McIntosh CS200 Handleiding

8 Februari 2023

McIntosh XCS1K Handleiding

14 Januari 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024

REL Acoustics Strata Handleiding

20 April 2024

REL Acoustics Strata III Handleiding

20 April 2024

Soen Transit Handleiding

18 April 2024

Miller & Kreisel MP300RC Handleiding

18 April 2024

Soen Transit XS Handleiding

18 April 2024

Miller & Kreisel MP7 Handleiding

18 April 2024

Qian QRBT1801 Handleiding

17 April 2024

Focal Twin6 Handleiding

17 April 2024

Kenwood KFC-WPS1000F Handleiding

16 April 2024