McIntosh WS300 Handleiding

McIntosh Speaker WS300

Lees hieronder de 📖 handleiding in het Nederlandse voor McIntosh WS300 (6 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6

McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549

WS300

In-Wall Loudspeaker System

Installation Guide

WARNING - TO REDUCE RISK OF FIRE OR

ELECTRICAL SHOCK, DO NOT EXPOSE THIS

EQUIPMENT TO RAIN OR MOISTURE.

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

PERSONNEL.

IMPORTANT SAFETY

INSTRUCTIONS!

PLEASE READ THEM BEFORE

OPERATING THIS EQUIPMENT.

General:

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Warning: To reduce risk of fire or electrical shock, do not

expose this equipment to rain or moisture. This unit is

capable of producing high sound pressure levels. Continued

exposure to high sound pressure levels can cause permanent

hearing impairment or loss. User caution is advised and ear

protection is recommended when playing at high volumes.

6. Only use attachments/accessories specified by the

manufacturer.

Installation:

7. Install in accordance with the manufacturer’s instructions.

8.When mounting the Ceiling Loudspeaker System to a

building structure it is important to follow all of the local

building/construction codes. Make sure the ceiling structural

members can support a total weight of five times the weight

of the Ceiling Loudspeaker System.

9. Do not install near any heat sources such as radiators, heat

registers, stoves, or other equipment (including amplifiers)

that produce heat.

10. Do not use this equipment near water.

11. Do not expose this equipment to dripping or splashing and

ensure that no objects filled with liquids, such as vases, are

placed on the equipment.

Care of Equipment:

12. Clean only with a dry cloth.

13. Do not permit objects or liquids of any kind to be pushed,

spilled and/or fall into the equipment through enclosure

openings.

Repair of Equipment:

14. Refer all servicing to qualified service personnel. Servicing

is required when the equipment has been damaged in any

way, liquid has been spilled or objects have fallen into

the equipment, the equipment has been exposed to rain or

moisture, does not operate normally, or has been dropped.

15. Do not attempt to service beyond that described in the

operating instructions. All other service should be referred

to qualified service personnel.

16. When replacement parts are required, be sure the service

technician has used replacement parts specified by

McIntosh or have the same characteristics as the original

part. Unauthorized substitutions may result in fire, electric

shock, or other hazards.

17. Upon completion of any service or repairs to this product,

ask the service technician to perform safety checks to

determine that the product is in proper operating condition.

Please read these Safety Instrucons as well

as the Important Additional Operation

Information Guide that is enclosed.

Thank you from all of us at McIntosh

You have invested in a precision instrument that will

provide you with many years of enjoyment. Please take a

few moments to familiarize yourself with the features and

instructions to get the maximum performance from your

equipment.

If you need further technical assistance, please contact

your McIntosh Dealer who may be more familiar with

your particular setup including other brands. You can also

unlikely event of needing service.

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, New York 13903

Technical Assistance Phone: (607) 723-3512

Customer Service (for repairs)

Phone: (607) 723-3515

Fax: 607-724-1917

support@mcintoshlabs.com

Website: mcintoshlabs.com

Make a Note

For future reference, you can write your serial number and

purchase information here. We can identify your purchase

from this information if the occasion should arise.

Serial Number:

Purchase Date:

Dealer Name:

Important Safety Instrucons

Table of Contents

Important Safety Instructions

��

Thank you from all of us at McIntosh

��

Make a Note

��

Tools Needed

��

Parts Included

��

Ready To Perform

��

Making a Hole

��

Installing the Frame

��

Connecting to Speaker Wire

��

Putting it in the Wall

��

Warranty

��

Specifications

��

Drivers

��

Tools Needed

• Phillips Screwdriver

• Drywall Knife or Saw

• Pencil

• Tape Measure

• Stud nder

• Bubble Level

Parts Included

• Loudspeaker Bafe and Enclosure

• Frame

• Frame Gaskets (2)

• Grille

• Cutout Template

• Clamping Pieces (2 already installed on frame)

• Frame Screws #10-24 x 3 inch (6 already installed)

• Bafe Washers #8 (4)

• Bafe Screws #10-24 x 1-1/2 inch (4)

Ready To Perform

The WS300 In-Wall Loudspeaker System is designed to

provide exceptional performance. This 3-way speaker

features McIntosh’s acclaimed MTM speaker array and

shallow woofer design contained in a fully enclosed

back chamber. The design allows for expansive sound

performance with a shallow footprint perfect for in-wall

mounting.

The Low Prole Micro-Flange Grill is magnetically held in

place. These grills are ready to be painted if you wish.

Making a Hole

For new construction, the RK300 rough-in bracket

is recommended. The RK300 is available from your

McIntosh Dealer. If you have installed the RK300 skip

ahead to “Installing the Frame”.

Choose the proper position for the WS300 keeping in

mind acoustical properties, the positions of studs and

ability to run speaker wire to the WS300. When the

proper location is found:

Hold the supplied cutout template against the wall and

align it using a bubble level and tape the template to the

wall.

Trace the opening.

For dry wall installation, use a drywall knife or saw to

cut a hole. The hole should be 13 1/4 inches (33.655cm)

wide by 13 1/4 inches (33.655cm) in height.

Installing the Frame

The Frame Assembly has two Clamping Pieces

connected to the Frame by Six 3-inch screws (3 each).

The bolt at the end of each screw is there to make sure it

stays connected and need not be moved.

Install the “L” shaped self-adhesive Frame Gaskets to the

rear of the Frame so that the Gaskets will sit between the

Frame and the wall when installed.

With the Clamping Pieces loose, manipulate the frame

into the opening in the wall. The Clamping Pieces can be

moved to allow the frame to t. Once in place, position

the Clamping Pieces against the back of the wallboard on

each side.

When satised that the Frame is level (using a bubble

level), tighten all six screws until the Frame is securely

attached to the wall.

Connecng to Speaker Wire

Prepare Speaker Wires for connection to the WS300.

Remove ½ inch (12.7 mm) of insulation from the wire

end and twist the strands together. For runs under 25

feet use at least 16AWG wire. For runs under 50 feet use

at least 14AWG, and for longer runs up to 100 feet use

12AWG. 12AWG, being the larger wire, can be used in

all the above cases if desired.

1. Pull enough speaker wire through the opening in the

Frame to connect to the WS300.

2. The two Loudspeaker Binding Posts are located

at the base of the Bafe Enclosure. Loosen the

Product specificaties

Merk:	McIntosh
Categorie:	Speaker
Model:	WS300

Heb je hulp nodig?

Als je hulp nodig hebt met McIntosh WS300 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker McIntosh

McIntosh XRT2.1K Handleiding

3 April 2024

McIntosh ML1 Handleiding

17 Augustus 2023

McIntosh CS100 Handleiding

26 April 2023

McIntosh LCR80 Handleiding

21 April 2023

McIntosh XCS1.5K Handleiding

18 April 2023

McIntosh XRT2K Handleiding

18 Maart 2023

McIntosh XR100 Handleiding

10 Februari 2023

McIntosh RS100 Handleiding

10 Februari 2023

McIntosh CS200 Handleiding

8 Februari 2023

McIntosh XCS1K Handleiding

14 Januari 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024

REL Acoustics Strata Handleiding

20 April 2024

REL Acoustics Strata III Handleiding

20 April 2024

Soen Transit Handleiding

18 April 2024

Miller & Kreisel MP300RC Handleiding

18 April 2024

Soen Transit XS Handleiding

18 April 2024

Miller & Kreisel MP7 Handleiding

18 April 2024

Qian QRBT1801 Handleiding

17 April 2024

Focal Twin6 Handleiding

17 April 2024

Kenwood KFC-WPS1000F Handleiding

16 April 2024