McIntosh XCS1.5K Handleiding

McIntosh Speaker XCS1.5K

Lees hieronder de đź“– handleiding in het Nederlandse voor McIntosh XCS1.5K (12 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com
XCS1.5K
Center Channel Loudspeaker
Owner's Manual
2
Safety First
Please read the Safety Instructions included in a
separate document called “Important Additional
Operation Information Guide.”
Thank You From All of Us at McIntosh
Your decision to own this McIntosh XCS1.5K
Loudspeaker System ranks you at the very top among
discriminating music listeners. You now have “The
Best.” The McIntosh dedication to quality is assurance
that you will receive many years of listening enjoy-
ment from this unit.
Please take a short time to read the information in this
manual. We want you to be as familiar as possible
with all the features and functions of your new
McIntosh.
Please Take a Moment
The serial number, purchase date and McIntosh Dealer
name are important to you for possible insurance
claim or future service. The spaces below have been
provided for you to record that information:
Serial Number: _________________
Purchase Date: _________________
Dealer Name: _________________
Technical Assistance
If at any time you have questions about your McIntosh
product, contact your McIntosh Dealer who is familiar
with your McIntosh equipment and any other brands
that may be part of your system. If you or your Dealer
wish additional help concerning a suspected problem,
you can receive technical assistance for all McIntosh
products at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-1545
Fax: 607-724-0549
Customer Service
If it is determined that your McIntosh product is in
need of repair, you can return it to your Dealer. You
can also return it to the McIntosh Laboratory Service
Department. For assistance on factory repair return
procedure, contact the McIntosh Service Department
at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3515
Fax: 607-723-1917
General Information
CAUTION: The XCS1.5K weight is 178 pounds (80.74
kg). It requires three or more persons to safely
handle the Loudspeaker System.
1. Loudspeaker Cables of adequate size are important
to ensure that there will be no significant power loss or
heating. Cable size is specified in Gauge numbers or AWG
(American Wire Gauge). The smaller the Gauge number,
the larger the wire size:
If the Loudspeaker Cables are 50 feet (38.1m) or less, use at
least 12 Gauge (AWG) wire size or larger.
If the Loudspeaker Cables are 100 feet (76.2m) or less, use
at least 10 Gauge (AWG) wire size or larger.
2. For additional connection information, refer to the
owner’s manual(s) for any component(s) connected to the
XCS1.5K Loudspeaker.
3. The XCS1.5K’s built-in speaker protection incorporates
a number of protection devices in the crossover networks.
The tweeter and midrange arrays are protected from
overdrive by these devices. The protection allows a certain
amount of overdrive but extended periods will trigger
protection. If an obvious lack of high, mid or low frequen-
cies is noticed, the Protection Device may have activated.
These devices will automatically reset when the volume
Table of Contents
General Information ............................................ 2
Introduction .......................................................... 3
Performance Features .......................................... 3
Dimensions .......................................................... 4
Unpacking and Assembly .................................... 6-7
Installation ........................................................... 8
Specifications ....................................................... 10
General Specifications ......................................... 10
Packing Instructions ............................................ 10-11
3
Introduction
The XCS1.5K Center Channel Loudspeaker is the next
evolution in high power, high resolution Home Theater
Loudspeaker Design. High-end Loudspeaker develop-
ment is a marriage of art and science. The XCS1.5K
is the culmination of decades of work (and—we
must admit—play). Since the early 1970s, engineers
at McIntosh have been performing painstaking
loudspeaker research and development—examining
minute changes as well as exploring new technologies.
An example of utilizing innovation is the XCS1.5K’s
use of McIntosh’s advanced Bessel Array technol-
ogy, which, among other benefits, provides a wide
listening area from a short line array. The latest
sound principles and the highest quality components
combine to deliver strikingly realistic sound with
exquisite detail and imaging. Combining all these
elements to produce the most musical output possible
is the art of this mission. The result is this masterpiece
of sound reproduction.
The new McIntosh XCS1.5K Loudspeaker System is a
Center Channel Loudspeaker capable of reproducing
the full dynamic range of a symphony orchestra with
very low audible distortion. It is the perfect match
to the famous XRT1.1K and XRT2.1K Column
Loudspeakers, when used in a Home Theater / Music
System. It uses the same acoustic technology found
in the XRT1.1K and XRT2.1K Column Loudspeakers
developed by the McIntosh Acoustic Engineers. The
technology has been refined over the years and is now
the 6th generation of the design and provides superior
quality sound reproduction in a full range system.
The XCS1.5K Loudspeaker utilizes a Horizontal
Bessel and Hybrid Bessel Array for the Tweeters
and Midrange speaker units. The Sound Waves from
this Horizontal Array produce a stable and focused
symmetrical horizontal sound image. Since the audio
power fed to each row is distributed among all the
drivers, each driver does not have to work as hard,
resulting in greater power handling capability, greatly
reduced power compression and a dramatic reduction
in distortion.
The Low Frequency Section of the System consists
of four 8-inch Carbon Fiber Cone Woofers capable of
long cone excursions. The sound produced has very
low levels of harmonic distortion and a frequency
response down to 32Hz. They have a large motor
assembly made with high-coercivity ceramic magnets
for stable high-temperature operation. The woofer
design also utilizes an aluminum shorting ring and
copper capped pole piece. This results in lower
distortion due to more linear magnetic flux in the
voice coil gap. A good example of this low distortion
is incredible smoothness and effortless clarity in the
reproduction of the human voice.
The Crossover Networks used in the XCS1.5K
Loudspeaker System are phase matched between
the Low Frequency, Midrange and High Frequency
Sections to ensure a smooth frequency response over
the entire audible range. The crossover inductors are
selected so they will not add audible distortion. The
network capacitors are film type for extra reliability.
All the Capacitors and Inductors are chosen for high
current capacity. The midrange and tweeter sections
use auto-resetting over-current devices to provide an
extra measure of protection.
Performance Features
High Temperature Neodymium-Iron-Boron Alloy
Magnets - The fourteen 2.5 inch Midranges and
25 three-quarter inch Dome Tweeters all use the
Neodymium-Iron-Boron magnets. This Alloy has the
highest flux density per unit of volume and helps to
keep the Loudspeaker System weight to a minimum
while preserving the utmost in performance. The four
8 inch woofer/midrange speakers use a ferrite magnet
circuit with an aluminum demodulating ring.
Low Harmonic and Intermodulation Distortion
- The XCS1.5K Loudspeaker System is capable of
reproducing the full dynamic range of a symphony
orchestra with very low audible distortion of any kind.
High Power Handling - The Loudspeaker Elements
and Crossover Components of the XCS1.5K are all
chosen for use with powerful amplifiers up to 1,500
watts.
Superior Imaging - Using hybrid Bessel Arrays
ensures a wide listening angle, superior imaging, and
high power handling.
Versatile Operation and Placement - In addition to
the regular connections, the XCS1.5K Loudspeaker
System provides separate connections for
Bi-Amplification and Tri-Amplification hookups, as
well as Bi-Wiring and Tri-Wiring.
Gold Plated Input Connectors - The XCS1.5K input
connectors are gold plated for superior corrosion
resistance and high electrical conductivity.
level is reduced significantly and kept low until the output
of the affected Loudspeaker Element returns to normal.
4. When the XCS1.5K Loudspeaker System is driven by
more than one amplifier, the output levels of the different
amplifiers connected to the Loudspeaker System must
be adjusted to achieve a proper balance between the
low, midrange and high frequencies reproduced. This
adjustment is best achieved through the use of audio test
equipment operated by a qualified installer.
Copyright 2022 © by McIntosh Laboratory, Inc

Product specificaties

Merk: McIntosh
Categorie: Speaker
Model: XCS1.5K

Heb je hulp nodig?

Als je hulp nodig hebt met McIntosh XCS1.5K stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker McIntosh

McIntosh

McIntosh XRT2.1K Handleiding

3 April 2024
McIntosh

McIntosh ML1 Handleiding

17 Augustus 2023
McIntosh

McIntosh CS100 Handleiding

26 April 2023
McIntosh

McIntosh LCR80 Handleiding

21 April 2023
McIntosh

McIntosh XCS1.5K Handleiding

18 April 2023
McIntosh

McIntosh XRT2K Handleiding

18 Maart 2023
McIntosh

McIntosh XR100 Handleiding

10 Februari 2023
McIntosh

McIntosh RS100 Handleiding

10 Februari 2023
McIntosh

McIntosh CS200 Handleiding

8 Februari 2023
McIntosh

McIntosh XCS1K Handleiding

14 Januari 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata III Handleiding

20 April 2024
Soen

Soen Transit Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP300RC Handleiding

18 April 2024
Soen

Soen Transit XS Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP7 Handleiding

18 April 2024
Qian

Qian QRBT1801 Handleiding

17 April 2024
Focal

Focal Twin6 Handleiding

17 April 2024
Kenwood

Kenwood KFC-WPS1000F Handleiding

16 April 2024