MB Quart MBQG-STG2-RAD Handleiding


Bekijk gratis de handleiding van MB Quart MBQG-STG2-RAD (12 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 3.7 sterren uit 3 reviews. Heb je een vraag over MB Quart MBQG-STG2-RAD of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/12
Page 1 of 12
Installation Instructions
Model:
Polaris General
Description:
Stage 2 Install
Part Number:
MBQG-STG2-RAD
Assembly Time:
60 Min (1-Hour)
1 GMR-LED with Housing (MBQG-RAD-1) 1
2 6.5 Dash Speakers (MBQG-FPOD-1) 2
1 Bojo Tool
2 Panel Clip Pliers
3 7mm & 10mm wrench
4 T25 Torx Driver
5 11/32 Drill Bit
6 Drill
Tools Required
Parts List
Before you begin, read through these instructions and check that
all parts are present. Always disconnect negative battery terminal
prior to installation. Please note that MB Quart cannot assume any
responsibility for damage resulting from incorrect installation.
Page 2 of 12
Dash Disassembly
● Remove hood by turning two
latches
● Remove seven push clips from
front of dash
Page 3 of 12
Dash Disassembly
● Lift front of dash at eight locations
with Bojo tool
● Remove top two push pins
from driver and passenger door
opening


Product specificaties

Merk: MB Quart
Categorie: Niet gecategoriseerd
Model: MBQG-STG2-RAD

Heb je hulp nodig?

Als je hulp nodig hebt met MB Quart MBQG-STG2-RAD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden