Makita KP0810CK Handleiding
Makita
Schaafmachine
KP0810CK
Lees hieronder de 📖 handleiding in het Nederlandse voor Makita KP0810CK (12 pagina's) in de categorie Schaafmachine. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Power Planer
KP0810
KP0810C
007638
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model KP0810 KP0810C
Planing width 82 mm
Planing depth 4 mm
Shiplapping depth 25 mm
No load speed (min
-1) 16,000 12,000
Overall length 290 mm
Net weight 3.3 kg 3.4 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-5
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
ï½¥ Read instruction manual.
ï½¥ DOUBLE INSULATION
ï½¥ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
ENE001-1
Intended use
The tool is intended for planing wood.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Model KP0810
Sound pressure level (L
pA) : 88 dB(A)
Sound power level (L
WA) : 99 dB(A)
Uncertainty (K) : 3 dB(A)
Model KP0810C
Sound pressure level (L
pA) : 82 dB(A)
Sound power level (L
WA) : 93 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model KP0810
Work mode : planing softwood
Vibration emission (ah) : 3.0 m/s2
Uncertainty (K) : 1.5 m/s2
Model KP0810C
Work mode : planing softwood
Vibration emission (ah) : 3.5 m/s2
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
3
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-15
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Power Planer
Model No./ Type: KP0810,KP0810C
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
30.1.2009
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
10. Use of power supply via a RCD with a rated
residual current of 30mA or less is always
recommended.
Personal safety
11. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
12. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
13. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your finger on the switch or energising power tools
that have the switch on invites accidents.
Product specificaties
| Merk: | Makita |
| Categorie: | Schaafmachine |
| Model: | KP0810CK |
Heb je hulp nodig?
Als je hulp nodig hebt met Makita KP0810CK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Schaafmachine Makita
19 Juni 2023
15 Juni 2023
6 Juni 2023
26 Mei 2023
22 Maart 2023
23 Februari 2023
19 Februari 2023
9 Februari 2023
29 Januari 2023
19 Januari 2023
Handleiding Schaafmachine
- Schaafmachine Bosch
- Schaafmachine AEG
- Schaafmachine DeWalt
- Schaafmachine WOLF-Garten
- Schaafmachine Bavaria
- Schaafmachine Black Decker
- Schaafmachine Bort
- Schaafmachine Einhell
- Schaafmachine Felisatti
- Schaafmachine Ferm
- Schaafmachine Gamma
- Schaafmachine Gardena
- Schaafmachine Global
- Schaafmachine Gude
- Schaafmachine Hammer
- Schaafmachine Hikoki
- Schaafmachine Hitachi
- Schaafmachine Metabo
- Schaafmachine Parkside
- Schaafmachine Powerplus
- Schaafmachine Protool
- Schaafmachine Rupes
- Schaafmachine Ryobi
- Schaafmachine Skil
- Schaafmachine Stihl
- Schaafmachine Stomer
- Schaafmachine Taurus
- Schaafmachine Topcraft
- Schaafmachine Triton
- Schaafmachine Varo
- Schaafmachine Worx
- Schaafmachine Ozito
- Schaafmachine Black And Decker
- Schaafmachine Cocraft
- Schaafmachine Meec Tools
- Schaafmachine Cotech
- Schaafmachine Fieldmann
- Schaafmachine Mafell
- Schaafmachine Proxxon
- Schaafmachine Porter-Cable
- Schaafmachine Herkules
- Schaafmachine Rikon
- Schaafmachine Surtek
- Schaafmachine Snow Joe
- Schaafmachine Alpha Tools
- Schaafmachine Einhell Bavaria
- Schaafmachine McKenzie
- Schaafmachine Prowork
- Schaafmachine Proviel
- Schaafmachine XU1
- Schaafmachine Ergotools Pattfield
- Schaafmachine Bavaria By Einhell
Nieuwste handleidingen voor Schaafmachine
9 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024
25 Maart 2024
25 Maart 2024