Makita JR3000V Handleiding

Makita Zaagmachine JR3000V

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita JR3000V (32 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/32

Recipro saw Instruction Manual

Scie recipro Manuel d’Instructions

Reciprosäge Betriebsanleitung

Seghetto diritto Istruzioni d’Uso

Reciprozaag Gebruiksaanwijzing

Sierra alternativa Manual de Instrucciones

Serra de sabre Manual de Instruço˜ es

Bajonet sav Brugsanvisning

Tigersåg Bruksanvisning

Bajonettsag Bruksanvisning

Puukkosaha Käyttöohje

GR ¶·ÏÈÓ‰ÚÔÌÈÎﬁ ÚÈÔÓÈ √‰ËÁ›Â˜ ÃÚ‹ÛÂˆ˜

JR3000

JR3000V

1 2

3 4

5 6

7 8

ENGLISH Explanation of general view

1Hex wrench

2Bolt

3Shoe

4Bolt

5Speed change switch

6Switch trigger

7Lock button/Lock-oﬀ button

8Speed control screw

9High

0Low

qLimit mark

wBrush holder cap

eScrewdriver

SPECIFICATIONS

Model JR3000 JR3000V

Length of stroke .......................................................................... 30 mm 30 mm

Strokes per minute ...................................................................... Hi : 2,500 Low : 1,900 0 – 2,300

Overall length .............................................................................. 400 mm 400 mm

Net weight ................................................................................... 2.9 kg 2.9 kg

•Due to the continuing program of research and

development, the speciﬁcations herein are subject

to change without prior notice.

•Note: Speciﬁcations may diﬀer from country to

country.

Power supply

The machine should be connected only to a power

supply of the same voltage as indicated on the

nameplate, and can only be operated on single-phase

AC supply. They are double-insulated in accordance

with European Standard and can, therefore, also be

used from sockets without earth wire.

Safety hints

For your own safety, please refer to enclosed Safety

instructions.

These symbols mean:

Read instruction manual.

DOUBLE INSULATION

ADDITIONAL SAFETY RULES

1. Avoid cutting nails. Inspect for and remove all

nails from the workpiece before operation.

2. Do not cut oversize workpiece.

3. Check for the proper clearance beyond the

workpiece before cutting so that the blade will

not strike the ﬂoor, workbench, etc.

4. Hold the machine ﬁrmly.

5. Make sure the blade is not contacting the

workpiece before the switch is turned on.

6. Keep hands away from moving parts.

7. When cutting through walls, ﬂoors or wher-

ever ‘‘live’’ electrical wires may be encoun-

tered, DO NOT TOUCH ANY METAL PARTS OF

THE MACHINE! Hold the machine by the insu-

lated grasping surfaces to prevent electric

shock if you cut through a ‘‘live’’ wire.

8. Do not leave the machine running. Operate the

machine only when hand-held.

9. Always switch oﬀ and wait for the blade to

come to a complete stop before removing the

blade from the workpiece.

10. Do not touch the blade or the workpiece imme-

diately after operation; they may be extremely

hot and could burn your skin.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Installing saw blade (Fig. 1)

Important:

Always be sure that the machine is switched oﬀ and

unplugged before installing or removing the blade.

First, use the hex wrench to loosen the bolt. With the

blade teeth facing upward or downward, insert the

blade until the hole in the blade shank is just over the

protrusion on the slider. Then tighten the bolt to

secure the blade.

Adjusting shoe (Fig. 2)

Loosen the two bolts holding the shoe. Then slide the

shoe back or forth to the desired position and tighten

the two bolts securely. When the blade loses its

cutting eﬀectiveness in one place, reposition the shoe

to obtain better cutting in another.

Speed change (For JR3000 only) (Fig. 3)

CAUTION:

Use the speed change switch only after the machine

comes to a complete stop.

To change the machine speed, move the speed

change switch to the ‘‘L’’ position for low speed or the

‘‘H’’ position for high speed.

High speed: ordinary wood, plys or plastics

Low speed: metals (steel pipe, sheet metal, stainless

or copper)

Switch action (For JR3000) (Fig. 4)

CAUTION:

Before plugging the machine, always check to see

that the switch trigger actuates properly and returns to

the ‘‘OFF’’ position when released.

Product specificaties

Merk:	Makita
Categorie:	Zaagmachine
Model:	JR3000V

Heb je hulp nodig?

Als je hulp nodig hebt met Makita JR3000V stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Zaagmachine Makita

Makita BSS610 Handleiding

21 Februari 2024

Makita DLM463Z Handleiding

8 Juli 2023

Makita LS800D Handleiding

28 Juni 2023

Makita UC4020A Handleiding

20 Juni 2023

Makita 5008MGJ Handleiding

20 Juni 2023

Makita DLM465Z Handleiding

19 Juni 2023

Makita DPB180RTE Handleiding

17 Juni 2023

Makita JR3051T Handleiding

9 Juni 2023

Makita EA3500F Handleiding

7 Juni 2023

Makita 4350FCTK Handleiding

3 Juni 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Worx Nitro WX542.9 Handleiding

26 April 2024

Fieldmann FZP 25410-B Handleiding

15 April 2024

Milwaukee M18 BJS Handleiding

10 April 2024

Rona Standard Plus-C Handleiding

10 April 2024

Rona Profi-C Handleiding

10 April 2024

Milwaukee SCS 65 Q Handleiding

10 April 2024

Milwaukee M12 BS Handleiding

10 April 2024

Milwaukee M18 FMCS66 Handleiding

10 April 2024

Milwaukee M18 BSX Handleiding

10 April 2024

Bavaria By Einhell BFS 800E Handleiding

9 April 2024