Bosch GKW 18V-26N Professional Handleiding
Pagina's 72 Zaagmachine
Bekijk de handleiding van Bosch GKW 18V-26N Professional gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
Operating / Safety Instructions
Consignes d’utilisation / de sécurité
Instrucciones de funcionamiento y seguridad
Call Toll Free for Consumer Information & Service Locations
Pour obtenir des informations et les adresses de nos centres de service après-vente, appelez ce numéro gratuit
Llame gratis para obtener información para el consumidor y ubicaciones de servicio
For English Version
See page 2
●
Version française
Voir page 25
●
Versión en español
Ver la página 48
IMPORTANT
Read Before Using
●
IMPORTANT
Lire avant usage
●
IMPORTANTE
Leer antes de usar
1-877-BOSCH99 (1-877-267-2499) www.boschtools.com
GKW18V-26
GKW18V-26 Circular Saw OSI Final 20240730.indd 1GKW18V-26 Circular Saw OSI Final 20240730.indd 17/30/2024 3:55:48 PM7/30/2024 3:55:48 PM
2
Safety Symbols
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Table of Contents
General Power Tool Safety Warnings ......3
Safety Warnings for Circular Saws . . . . . . . . 5
Additional Safety Warnings for Circular
Saws ...........................6
Additional Safety Warnings .............7
Intended Use........................8
Cutting Masonry/Metal..............8
Symbols............................9
Getting to Know Your GKW18V-26
Cordless Circular Saw .............10
Specications ......................12
Assembly..........................13
Attaching the Blade ...............13
Vari-Torque Clutch ................14
Dust Extraction...................14
Inserting and Releasing Battery
Pack ........................15
Operating Instructions................16
Brake Action.....................16
Protection Against Deep
Discharging...................16
Overload Protection ...............16
Depth Adjustment.................16
90° Cutting Angle Check............17
Bevel Adjustment .................18
Cutting Line Guide Notches .........18
Saw Hook.......................19
Lock-off Release Buttons ...........19
Switch .........................19
All Cuts ........................20
Plunge Cuts .....................20
Cutting Large Sheets ..............21
Rip Cuts........................22
Maintenance .......................23
Service.........................23
Batteries........................23
Tool Lubrication..................23
Motors . . . . . . . . . . . . . . . . . . . . . . . . . 23
Bearings........................23
Cleaning........................23
Care of Blades ...................23
Accessories and Attachments...........24
GKW18V-26 Circular Saw OSI Final 20240730.indd 2GKW18V-26 Circular Saw OSI Final 20240730.indd 27/30/2024 3:55:48 PM7/30/2024 3:55:48 PM
3
General Power Tool Safety Warnings
Read all safety warnings, instructions, illustrations and specications pro-
vided with this power tool. Failure to follow all instructions listed below may
result in electric shock, re and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or bat-
tery operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Clut-
tered or dark areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodied plugs
and matching outlets will reduce risk of
electric shock.
b. Avoid body contact with earthed or
grounded surfaces, such as pipes, radia-
tors, ranges and refrigerators. There is an
increased risk of electric shock if your body
is earthed or grounded.
c. Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat,
oil, sharp edges or moving parts. Dam-
aged or entangled cords increase the risk of
electric shock.
e. When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f. If operating a power tool in a damp loca-
tion is unavoidable, use a Ground Fault
Circuit Interrupter (GFCI) protected
supply. Use of a GFCI reduces the risk of
electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the inuence of
drugs, alcohol or medication. A moment
of inattention while operating power tools
may result in serious personal injury.
b. Use personal protective equipment.
Always wear eye protection. Protective
equipment such as a dust mask, non-skid
safety shoes, hard hat or hearing protection
used for appropriate conditions will reduce
personal injuries.
c. Prevent unintentional starting. Ensure the
switch is in the off-position before con-
necting to power source and/or battery
pack, picking up or carrying the tool. Car-
rying power tools with your nger on the
switch or energizing power tools that have
the switch on invites accidents.
d. Remove any adjusting key or wrench be-
fore turning the power tool on. A wrench
or a key left attached to a rotating part
of the power tool may result in personal
injury.
e. Do not overreach. Keep proper footing
and balance at all times. This enables bet-
ter control of the power tool in unexpected
situations.
f. Dress properly. Do not wear loose cloth-
ing or jewelry. Keep your hair and clothing
away from moving parts. Loose clothes,
jewelry or long hair can be caught in mov-
ing parts.
g. If devices are provided for the connec-
tion of dust extraction and collection
facilities, ensure these are connected and
SAVE THESE INSTRUCTIONS
GKW18V-26 Circular Saw OSI Final 20240730.indd 3GKW18V-26 Circular Saw OSI Final 20240730.indd 37/30/2024 3:55:48 PM7/30/2024 3:55:48 PM
Product specificaties
| Merk: | Bosch |
| Categorie: | Zaagmachine |
| Model: | GKW 18V-26N Professional |
Heb je hulp nodig?
Als je hulp nodig hebt met Bosch GKW 18V-26N Professional stel dan hieronder een vraag en andere gebruikers zullen je antwoorden