Mackie PPM1008 Handleiding

Mackie Receiver PPM1008

Lees hieronder de 📖 handleiding in het Nederlandse voor Mackie PPM1008 (32 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/32
O W N E R ’ S M A N U A L
FOOT SWITCH
FX
/
2 X 800W PROFESSIONAL POWERED MIXER
PPM1008
8-Channel, 2 x 800 W Professional Powered Mixer
2
PPM1008
PPM1008
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including ampliïŹers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not ïŹt into your outlet, consult an electrician for
replacement of the obsolete outlet.
10.
Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11.
Only use attachments/accessories speciïŹed by the manufacturer.
12.
Unplug this apparatus during lightning storms or when unused for long
periods of time.
13.
Refer all servicing to qualiïŹed service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
14.
Do not overload wall outlets and extension cords as this can result in a
risk of ïŹre or electric shock.
15.
This apparatus shall not be exposed to dripping or splashing, and no
object ïŹlled with liquids, such as vases or beer glasses, shall be placed
on the apparatus.
16.
This apparatus has been designed with Class-I construction and must
be connected to a mains socket outlet with a protective earthing con-
nection (the third grounding prong).
17.
This apparatus has been equipped with an all-pole, rocker-style AC
mains power switch. This switch is located on the rear panel and
should remain readily accessible to the user.
CAUTION AVIS
RISK OF ELECTRIC . DO NOT OPENSHOCK
RISQUE DE ELECTRIQUE. NE PAS OUVRIRCHOC
CAUTION: REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK)TO
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING QUALIFIED PERSONNELTO
ATTENTION: POUR EVITER LES RISQUES DE CHOC ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE.
AUCUN ENTRETIEN DE PIECES INTERIEURES PAR L'USAGER.
CONFIER L'ENTRETIEN AU PERSONNEL QUALIFIE.
AVIS: POUR EVITER LES RISQUES D'INCENDIE OU D'ELECTROCUTION, N'EXPOSEZ S CET TICLE PA AR
A A LA PLUIE OU L'HUMIDITE
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure, that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
Le symbole éclair avec point de flÚche à l'intérieur d'un triangle équilatéral
est utilisé pour alerter l'utilisateur de la présence à l'intérieur du coffret de
"voltage dangereux" non isolé d'ampleur suffisante pour constituer un risque
d'éléctrocution.
The exclamation point within an equilateral triangle is intended to alert the
user of the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Le point d'exclamation à l'intérieur d'un triangle équilatéral est employé
pour alerter les utilisateurs de la présence d'instructions importantes pour le
fonctionnement et l'entretien (service) dans le livret d'instruction
accompagnant l'appareil.
WARNING — To reduce the risk of ïŹre or electric shock, do not
expose this apparatus to rain or moisture.
18. NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equip-
ment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
‱ Reorientorrelocatethereceivingantenna.
‱ Increasetheseparationbetweentheequipmentandthe
receiver.
‱ Connecttheequipmentintoanoutletonacircuitdifferentfrom
that to which the receiver is connected.
‱ Consultthedealeroranexperiencedradio/TVtechnicianfor
help.
CAUTION: Changes or modiïŹcations to this device not expressly
approved by LOUD Technologies Inc. could void the user's authority to
operate the equipment under FCC rules.
19.
This apparatus does not exceed the Class A/Class B (whichever is
applicable)
limits for radio noise emissions from digital apparatus as
set out in the radio interference regulations of the Canadian Department
of Communications.
ATTENTION — Le prĂ©sent appareil numĂ©rique n’émet pas de bruits
radioélectriques dépassant las limites applicables aux appareils numériques de
class A/de class B (selon le cas) prescrites dans le réglement sur le brouillage
radioélectrique édicté par les ministere des communications du Canada.
20.
Exposure to extremely high noise levels may cause permanent hearing
loss. Individuals vary considerably in susceptibility to noise-induced
hearing loss, but nearly everyone will lose some hearing if exposed to
sufïŹciently intense noise for a period of time. The U.S. Government’s
Occupational Safety and Health Administration (OSHA) has speciïŹed
the permissible noise level exposures shown in the following chart.
According to OSHA, any exposure in excess of these permissible limits
could result in some hearing loss. To ensure against potentially danger-
ous exposure to high sound pressure levels, it is recommended that all
persons exposed to equipment capable of producing high sound pres-
sure levels use hearing protectors while the equipment is in operation.
Ear plugs or protectors in the ear canals or over the ears must be worn
when operating the equipment in order to prevent permanent hearing
loss if exposure is in excess of the limits set forth here.
Duration,
per day in
hours
Sound Level
dBA, Slow
Response
Typical Example
8 90 Duo in small club
6 92
4 95 Subway Train
3 97
2 100 Veryloudclassicalmusic
1.5 102
1 105 Greg and Ben screaming at Troy about deadlines
0.5 110
0.25 or less 115 Loudest parts at a rock concert
Correct disposal of this product. This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product
should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and
human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural
resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city ofïŹce, waste authority, or your household waste disposal service.
Important Safety Instructions
3
Owner’s Manual
Owner’s Manual
Part No. SW0685 Rev. F 12.2013
©2013 LOUD Technologies Inc. All Rights Reserved.
Episode 3: The Mackie marketing department landing party arrives on
Aldebaran 3 to investigate a distress signal, with hilarious results.
Ready, steady, go!
1. Turn the channel level, mon 1, and FX/mon 2
controls fully down.
2. Turn down the compressor controls (ch. 1–4).
3. Set all the EQ controls to the center, including
the graphic EQ sliders.
4. Turn down the main level and monitor 1 level
controls.
5. For each channel, press the gain switch in (low
gain) if you are using a line-level source. Press
it out (high gain) if you are using a microphone
or other low-level source.
6. For condenser mics, push in the phantom
power switch. If you are using both condenser
and dynamic mics, don’t worry. Phantom power
will not hurt most dynamic mics. Check the
micro phone’s user manual if you’re not sure.
7. Play something into an input at real-world
levels, and turn up the channel level to
U (unity).
8. In normal playing, the channel's OL LED should
only light occasionally. If it stays on for a large
portion of your performance, check that the
gain switch is set correctly.
9. Slowly turn up the main level control until you
hear the signal in your speakers.
10. Repeat steps 5 to 8 for the remaining channels.
11. If needed, apply some EQ wisely.
12. Adjust the levels to get the best mix. Keep the
level controls fully down on unused channels.
Other Notes
‱ Onlyconnectthepoweredmixer'sspeaker-level
outputs to passive loudspeakers.
‱ Whenshuttingdown,turnoffanyexternal
ampliïŹers or powered loudspeakers ïŹrst. When
powering up, turn on any external ampliïŹers or
powered loudspeakers last.
‱ Savetheshippingbox!
Read This Page!
We realize that you must be keen to try
out your new powered mixer, but please
read the safety instructions on page 2,
and this page ïŹrst.
Setup
The PPM1008 powered mixer is designed to be easy to
operate, and to be set up quickly.
Place the powered mixer in a position where it is easy
to reach the controls. All the controls and input
connection points are located on the front panel so you
can make quick adjustments and connections on stage.
Make sure there is at least 6 inches of airspace behind
the powered mixer for ventilation. There are two fans
inside the cabinet to cool the power ampliïŹer section.
Use the powered mixers in a nice clean and dry
environment, free from dryer lint and dust bunnies.
Connections
1. Be sure the rear-panel power switch is off
before making any connections.
2. Push the linecord securely into the IEC
connector on the rear panel, and plug it into a
3-prong AC outlet that is properly conïŹgured
for the voltage of your powered mixer.
3. Plug a balanced microphone into one of the mic
XLR (3-pin) connectors on the front panel. Or
you can connect any line-level signal
(keyboard, or guitar preamp) to a line-level
input using a TS or a TRS 1/4" plug.
4. You can connect a guitar directly to inputs 5 or
6 without need for a DI box, if you press the hi-z
switch on these channels.
5. The insert jacks can be used to connect an
external effects or dynamics processor into the
signal chain. See page 13 for more details.
6. Plug the speakers (4 ohms or greater) into the
speaker output jacks on the rear panel. If you
plug two speakers in one side, each speaker
must be 8 ohms or greater to maintain a 4-ohm
minimum load on the ampliïŹer. Use at least
18 gauge speaker cable with 1/4" TS plugs or
SpeakonÂź plugs. For now, set the rear panel
power amp mode switch to stereo mains.
Don’tuseguitarcordsforspeakercables!
They’re not designed to handle speaker-level
signals and could overheat.
Please write your serial number here for future
reference (i.e., insurance claims, tech support,
return authorization, make dad proud, etc.)
Purchased at:
Date of purchase:


Product specificaties

Merk: Mackie
Categorie: Receiver
Model: PPM1008

Heb je hulp nodig?

Als je hulp nodig hebt met Mackie PPM1008 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Mackie

Handleiding Receiver

Nieuwste handleidingen voor Receiver