AudioControl Epic Six Handleiding
Pagina's 20 Receiver
Bekijk de handleiding van AudioControl Epic Six gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag
Features
• Compact High-Power Class D Amplier
• High-Current Design - 2 ohms Stable
• 6 x 100 Watts @ 4 ohms
• 6 x 200 Watts @ 2 ohms
• 2 x 400 Watts @ 4 ohms Bridged (Ch. 3/4 and 5/6)
• Smart Auto-Reset Protection Circuit
• Serious power. Questionable self-control.
SIX CHANNEL AMPLIFIER
2
SIX CHANNEL AMPLIFIER
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as muers, silencers, exhaust
pipes, or other apparatus (including ampliers) that produce heat.
9. WARNING: Improper installation may lead to permanent injury or
death. Installation of the apparatus must be done with great care by
qualied personnel, to prevent damage to fuel lines, power and other
electrical wiring, hydraulic brake lines, and other systems, that might
compromise vehicle safety.
10. Provide +12V and Ground wiring of sucient size to ensure adequate
current to the amplier.
11. Use rubber grommets to protect wiring whenever passing wires
through metal openings or bulkheads.
12. Only use attachments/accessories specied by the manufacturer.
13. Refer all servicing to qualied service personnel. Servicing is required
when the apparatus has been damaged in any way, such as the power
input terminals are damaged or objects have fallen into the apparatus,
does not operate normally, or has been dropped.
14. Fuses shall be replaced only with the correct type and fuse value, and
only when the apparatus is powered o.
15. Exposure to high sound pressure levels may lead to permanent hearing
loss. Take every precaution to protect your hearing.
The lightning ash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure, that may be of
sucient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user of the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
Caution: to reduce the risk of electric shock, do
not disassemble the apparatus.There are no
user-serviceable parts inside. Refer servicing to
qualied personnel.
Recycling notice: If the time comes and this apparatus has fullled its destiny,
do not throw it out into the trash. It has to be carefully recycled
for the good of mankind, by a facility specially equipped for the
safe recycling of electronic apparatii. Please contact your local or
state recycling leaders for assistance in locating a suitable nearby
recycling facility. Or, contact us and we might be able to repair it
for you.
Here are a few general steps to get your EPICSIX six channel
amplier up and running:
1. Undo the +12V and Ground connections to the vehicle battery
before making any connections to the amplier.
2. Pick a mounting location that will provide access to the controls
and connections, provide plenty of good ventilation, and protect
the amplier from heat, moisture, and dirt. Make sure the heat
sink ns are not covered.
3. The EPICSIX six channel amplier needs to be securely mounted
using the four mounting holes located in each corner.
4.
Before drilling any holes, take every precaution to prevent
any damage to fuel lines, power and other electrical wiring,
hydraulic brake lines, and other systems that might compromise
vehicle safety.
5. When making connections, designate red RCA plugs as right,
and designate white, black, or gray plugs as left. This is a good
idea for consistency.
6. Use quality interconnect cables.
7.
Always connect the Ground terminal rst before connect-
ing the 12V power wire to the amp. NEVER REMOVE THE
GROUND WIRE from the amp while the 12V wire is connected.
Not following these instructions could result in damaging the
amp and this would not be covered under warranty.
8. Connect the Ground terminal of the amplier to a clean, solid
ground in the vehicle, i.e. sheet metal. Use the shortest length
possible of quality insulated wire of the recommended wire
gauge (see specications). Grind away any paint or coatings to
ensure a clean, metal to metal contact. Use a sheet metal screw
with a serrated ange, or a bolt and star washer.
9. Connect the +12V terminal of the amplier to the +12V terminal
of the vehicle battery. Use the same gauge wire used for the
Ground wire.
This wire must be fused close to the battery with an in-line
fuse. See specications for the recommended fuse rating.
10. Connect the remote power terminal of the amplier to the
remote turn-on output of your source unit.
11. Connect your source or line output converter (LOC) outputs to
the amplier.
12. Connect your loudspeakers (minimum impedance of 2 ohms or 4
ohms bridged).
13. Set the crossovers to the frequency recommended by the loud-
speaker manufacturer.
14. When all connections are made, reconnect the vehicle battery.
15. Adjust your gain settings to maximize your signal level.
16. Enjoy the drive!
3
Product specificaties
| Merk: | AudioControl |
| Categorie: | Receiver |
| Model: | Epic Six |
Heb je hulp nodig?
Als je hulp nodig hebt met AudioControl Epic Six stel dan hieronder een vraag en andere gebruikers zullen je antwoorden