LigoWave 5-23 PRO Handleiding

LigoWave Access point 5-23 PRO

Lees hieronder de 📖 handleiding in het Nederlandse voor LigoWave 5-23 PRO (48 pagina's) in de categorie Access point. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/48

LigoPTP PRO v6.94

User’s Guide

Revision 1.0

this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated

into any language in any form by any means without the written permission of LigoWave.

Notice

LigoWave reserves the right to change speciﬁcations without prior notice.

While the information in this manual has been compiled with great care, it may not be deemed an

assurance of product characteristics. LigoWave shall be liable only to the degree speciﬁed in the

terms of sale and delivery.

The reproduction and distribution of the documentation and software supplied with this product and

the use of its contents is subject to written authorization from LigoWave.

Trademarks

LigoWave logo is trademark of LigoWave LLC.

All other registered and unregistered trademarks in this document are the sole property of their

respective owners.

FCC Warning

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment oﬀ

and on, the user is encouraged to try to correct the

interference by one of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment

and receiver.

 Connect the equipment into an outlet on a circuit

diﬀerent from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV

technician for help.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

FCC Caution

To assure continued compliance, any changes or

modiﬁcations not expressly approved by the party

responsible for compliance could void the user's

authority to operate this equipment.

FCC Radiation Exposure Statement

To comply with FCC RF exposure requirements in

section 1.1307, a minimum separation distance of 3.9

feet is required between the antenna and all

occupational persons, and a minimum separation

distance of 8.7 feet is required between the antenna

and all public persons.

CE Mark Warning

This is a Class A product. In a domestic environment

this product may cause radio interference in which

case the user may be required to take adequate

measures.

R&TTE Compliance Statement

This equipment complies with all the requirements of

the Directive 1999/5/EC of the European Parliament

and the Council of 9 March 1999 on Radio Equipment

and Telecommunication Terminal Equipment and the

Mutual Recognition of their Conformity (R&TTE).

The R&TTE Directive repeals and replaces in the

directive 98/13/EEC (Telecommunications Terminal

Equipment and Satellite Earth Station Equipment) As

of April 8, 2000.

Safety

This equipment is designed with the utmost care for

the safety of those who install and use it. However,

special attention must be paid to the dangers of electric

shock and static electricity when working with

electrical equipment. All guidelines of this manual and

of the computer manufacturer must therefore be

allowed at all times to ensure the safe use of the

equipment.

EU Countries Intended for Use

The ETSI version of this device is intended for home

and oﬀice use in Austria, Belgium, Denmark, Finland,

France (with Frequency channel restrictions),

Germany, Greece, Ireland, Italy, Luxembourg, The

Netherlands, Portugal, Spain, Sweden and United

Kingdom. The ETSI version of this device is also

authorized for use in EFTA member states Iceland,

Liechtenstein, Norway and Switzerland.

EU Countries Not Intended for Use

None.

Product specificaties

Merk:	LigoWave
Categorie:	Access point
Model:	5-23 PRO
Kleur van het product:	Wit
Gewicht:	3300 g
Breedte:	387 mm
Diepte:	80 mm
Hoogte:	379 mm
Internationale veiligheidscode (IP):	IP67
LED-indicatoren:	LAN, Power
Bedrijfsmodi:	P2P
Plaatsing:	Ceiling, In-wall, Wall, Window
Frequentieband:	5.15 - 5.915 GHz
Snelstartgids:	Ja
Inclusief AC-adapter:	Ja
Vermogensverbruik (max):	8 W
Certificering:	FCC, IC, CE, NCC (5-N: CCAJ13LP2141T5; 5-23: CCAJ13LP2140T3)
Modulatie:	16-QAM, 64-QAM, BPSK, OQPSK
Gevoeligheid ontvanger:	-97 - -75
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Netwerkstandaard:	IEEE 802.11a, IEEE 802.1x
Antennas quantity:	1
Antenne versterkingsniveau (max):	23 dBi
Upgraden van firmware mogelijk:	Ja
Draadloos LAN data-overdrachtsnelheid (max):	300 Mbit/s
Web-gebaseerd management:	Ja
Luchtvochtigheid bij opslag:	0 - 90 procent
DHCP server:	Ja
Maximale overdrachtssnelheid van gegevens:	300 Mbit/s
2,4 GHz:	Nee
5 GHz:	Ja
Kanaalbandbreedte:	40 MHz
Quality of Service (QoS):	Ja
DHCP client:	Ja
Power over Ethernet (PoE):	Ja
Antennefuncties:	Ingebouwde antenne
Aantal kanalen:	2 kanalen
Bandbreedte:	5.915 GHz
Maximum outdoorbereik:	46000 m
WAN-poort:	Ethernet (RJ-45)
Full duplex:	Ja
Beheerprotocollen:	WNMS, WNMS Cloud
Draadloze isolatie:	Ja
Automatische kanaalselectie:	Ja
AC-ingangsspanning:	100 - 240 V
Relatieve vochtigheid in bedrijf (V-V):	-40 - 85 procent
Syslog:	Ja
Gegevensdoorvoersnelheid:	220 Mbit/s
Inclusief PoE-adapter:	Ja