LG FRS640D1F0B Handleiding

LG Verlichting FRS640D1F0B

Lees hieronder de đź“– handleiding in het Nederlandse voor LG FRS640D1F0B (3 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
- 2 -
Interior wiring
of the building
Wire connectors
Product ’s
power cables
NEUTRA
NEUTRA
NEUTRA
NEUTRA
NEUTRANEUTRAL
L
L
L
LL
LIV
LIV
LIV
LIV
LIVLIVE
E
E
E
EE
P.E
P.E
P.E
P.E
P.EP.E.
.
.
.
..
NEUTRAL
LIVE
P.E.
Installation
Dimming Terminal Connection
1. T-BAR
• Make sure to turn off the main power switch of the installation space before connection.
• Connect so that the colors of the 3 power cables match. (LIVE: BROWN, NEUTRAL: BLUE, P.E.: GREEN/YELLOW)
1Drill and prepare the
ceiling so the hole is
smaller than the
product.
2Connect the 3 product
cables to the interior
wiring of the building.
For wire connectors,
use standardized
products.
3Rotate the connected
product by 20 degrees.
Then insert it into the
T-Bar insertion space.
• Make sure that all 4
sides of the product
match the T-Bar.
4Place the horizontal
product into the T-Bar. 5Ensure the inserted
product is horizontal.
Interior wiring
of the building
Wire connectors
Product ’s
power cables
NEUTRA
NEUTRA
NEUTRA
NEUTRA
NEUTRANEUTRAL
L
L
L
LL
LIV
LIV
LIV
LIV
LIVLIVE
E
E
E
EE
P.E
P.E
P.E
P.E
P.EP.E.
.
.
.
..
NEUTRAL
LIVE
P.E.
2. M-BAR
• Make sure to turn off the main power switch of the installation space before connection.
• Connect so that the colors of the 3 power cables match. (LIVE: BROWN, NEUTRAL: BLUE, P.E.: GREEN/YELLOW)
• Use woodscrews provided by LG Electronics.
(In case of a model of 620 M-Bar, Use silver colored screws if the ceiling tiles are thicker than 9.0t. If not, use black colored screws.)
1Drill and prepare the
ceiling so that the hole
is smaller than the
product.
2Connect the 3 product
cables to the interior
wiring of the building.
For wire connectors,
use standardized
products.
3Check the installation
location. 4Fix the product by using
woodscrews.
• Check to see that the
product is fixed into
place.
5Perform a lighting test
to see if the product is
working properly.
• After the installation is
complete, remove the
protective sheet.
6Once installation is complete, turn on the
power switch to check it is operating properly.
• After the installation is complete, remove the
protective sheet.
※During the use of connector socket, if the power line
is forced in, it may not be lighted due to defect
contact.
※When this luminaire is connected to branch circuit,
installation engineer must use the connector that meets
the glow-wire test of 650°C (in case of France, 850°C)
or higher.
-Connector Socket-
-Dimming Connector-
(O) (X)
※When each cable is inserted into the
dimming connector socket, the wire which
removes the covering must not come into
contact with the case.
To dim the lamps, a compatible dimmer should be used.
The use of incompatible dimmers will result in damage to the products.
Before installing dimmers, verify the compatible dimmer list with your local LGE sales representative.
※Wire dimming function is included. (0-10V)
※Please use wire with designated thickness. (24-20AWG)
※Be careful of the polarity for correct dimming control.
※ Maximum number of products to be connected to
1 dimming controller: 20 (Compatible dimmer:
ArteorTM Fluo Dimmer (Legrand Electric Ltd.),
AU-DSPLED (Aurora Ltd.))
※The function of dimming control may not be served depending on the product.
1
2
Pin No. Output Name
1 0~10V
2 GND
- 1 -
LED FLAT LIGHT
Installation Manual
• Please read the 「 」Safety Precautions prior to install for your safety.
• This manual is intended to prevent product damage and protect the user’s safety.
• Violation of warnings may lead to serious injury or death.
Safety Precautions
WARNING
Turn power off before
contact of the product.
• Risk of electric shock.
Install a circuit breaker.
• Risk of fire and electric shock.
Use with proper rated
voltage. (less than ±10%)
• Risk of fire and product damage.
Perform grounding work.
• Risk of electric shock.
Electric work must be
performed by a certified
technician according to the
installation manual.
• Inadequate power capacity and
faulty electric work may lead to
fire or electric shock.
Do not randomly connect the
power polarities.
• Risk of product damage and
accidents.
Do not install in areas that
have risks of flooding.
• Risk of electric shock and fire.
Do not use the product if
impurities are present in the
product or if the product is
submerged.
• Risk of accidents such as electric
shock and product damage.
Do not store in a humid area.
• Risk of product malfunctioning.
If the lamp turns off by itself, do
not disassemble the product.
Contact your local LGE sales
representative for repair.
• Risk of electric shock and
product malfunctioning.
Do not stare directly at the
lamp when turned on.
• Strong light may cause visual
impairment.
Do not expose the product to
water when cleaning it.
• Risk of fire and electric shock.
Do not use if the product has
been dropped or exposed to
shock.
• Risk of product malfunctioning.
Must have at least two or
more people working during
installation.
• Risk of product dropping and
causing injury to the user.
Product is heavy. Use a
trolley when transporting the
product.
• Dropping the product may cause
product damage and
malfunction.
Do not install where it may
be exposed to direct
sunlight, humidity, or dust.
Do not clean the product with
inflammable substances
such as alcohol, benzene,
and acetone that may alter
the surface.
Do not install near potential
sources of fire or
inflammable objects, such as
paper or cloth.
• Risk of product malfunctioning
and accidents.
Do not disassemble or arbitrarily
remodel the product. Do not use for
underwater lighting purposes.
(Underwater landscape,
searchlight, fishing, events, etc.)
• Risk of fire and electric shocks.
Must fix the product properly
on the ceiling.
• Risk of product dropping and
causing injury to the user.
• Violation of precautions may lead to light injury or product damage.
CAUTION
MFL67703801
- 4 -
Limited Warranty
The limited warranty set forth below is given by LG Electronics, Inc. (“LGE”) with respect to the lighting
product packaged with this limited warranty. (the “Product”). Your Product ,when delivered to you in
new condition in its original packaging, is warranted against defects in materials or workmanship as
follows: for a period of two (2) years from the date of original purchase, defective parts or a defective
Product returned to LGE, or its authorized service providers, as applicable, and proven to be defective
upon inspection, will be repaired, or exchanged for a new Product, as determine by LGE, or the
authorized service provider. This limited warranty is conditioned upon proper storage, installation,
use and maintenance complying with their respective published specifications, and does not apply
in the following cases: (a) Loss of or damage to the Product due to abuse, mishandling, alteration,
accident, electrical current fluctuations failure to follow operating, maintenance or environmental
instructions prescribed by LGE in writing or services performed by someone other than LGE or an
authorized service provider. To make a warranty claim, contact your local LGE sales representative.
After contacting your local LGE sales representative, you will receive instructions regarding if, when
and where to ship non-conforming Product. Failed Product must be returned for inspection and
verification of non-conformance by LGE. Failure to follow this procedure shall void this warranty.
WARRANTY IS VOID IF PRODUCT IS NOT USED FOR THE PURPOSE FOR WHICH THIS
PRODUCT IS MANUFACTURED. NO IMPLIED WARRANTY, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, APPLIES
TO THE PRODUCT AFTER THE APPLICABLE PERIOD OF THE EXPRESS LIMITED WARRANTY
STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY, EXCEPT AS
MENTIONED ABOVE, GIVEN BY ANY PERSON OR ENTITY WITH RESPECT TO THE PRODUCT
SHALL BIND LGE. (SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO
YOU.)
WEEE
http://www.lg.com/global/sustainability/environment
/
P/No.: MFL67703801(REV00)
- 3 -
Check the following before requesting repair service
Symptom Check
It won’t turn on. Check to see if the power is connected or if the switch is off.
Check to see if the dimming wires has short-circuited.
It flickers. Turn the power off. Turn it back on after a moment.
(If the flickering problem still exists, make a service request.)
A certain area is dark.
Make a service request.
It may blink momentarily
at first lighting. Blinking 1 time at first lighting is not a disorder.
Sequential Lighting
When it is lighted after connecting several lamps, the time of lighting
may be different.
Product Size
49
41
T: 1259
T: 299
M: 310
M: 1270
T: 596
M: 620
T: 596
M: 620
*Unit: mm
T : T -Bar
M : M-Bar


Product specificaties

Merk: LG
Categorie: Verlichting
Model: FRS640D1F0B

Heb je hulp nodig?

Als je hulp nodig hebt met LG FRS640D1F0B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Verlichting LG

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting