Lezyne React Drive Handleiding
Pagina's 1 Fietslamp
Bekijk de handleiding van Lezyne React Drive gratis online of download de PDF. Deze handleiding is 3 keer bekeken. Vraag over dit model? Stel een vraag
Viewing Radar on GPS Device
Viewing radar vehicle alerts on React Drive
Pairing Radar Drive & React Drive
Three (3) addional use cases when paired with the React Drive in the Radar React system
4. Smartphone app mode - Pairing Radar Drive with React Drive and Smartphone app (via Bluetooth®)
Requirements:
● Smartphone (iOS or Android)
● Lezyne Radar Ally app (download from App Store or Google Play)
● Accept the safety disclaimer
● React Drive
Step 1: Turn on the Lights
● Press and hold the power buon on both the Radar Drive and the React Drive for 2 seconds
unl both lights turn on.
● Keep the lights within 2 meter of your smartphone.
Step 2: Open the App
● Ensure is enabled on your smartphone.Bluetooth®
● Launch the Lezyne Radar Ally app.
Step 3: Pair the Device
● Follow the on-screen instrucons to complete pairing.
● Once paired, you can use the app to control the power and modes of both the Radar Drive
and the React Drive.
● When a vehicle approaches from behind, the Radar Drive will transmit a detecon signal via to Bluetooth®
both the —which will display visual icons and play audible alerts on your smartphone—Lezyne Radar App
and the , which will acvate its rear-facing red back-cap light and emit audible warning sounds React Drive
to nofy the rider.
6. Standalone Mode - Pairing Radar Drive direct with React Drive (No Device Connecon Required)
Once the Radar Drive and React Drive have been paired using the Lezyne Radar Ally App, they will automacally
connect to each other via whenever both lights are turned on—no need to re-open the app.Bluetooth®
● When a vehicle approaches from behind, the Radar Drive will send a detecon signal via to the React Bluetooth®
Drive, which will then acvate its rear red back cap light and emit audible warning sounds to alert the rider.
5. GPS Cycling Computer - Pairing with and bike computer (via ANT+®)Radar Drive RearReact Drive Front
Battery Indicator
10025
60:00
h : nmi
LUMENS
NIGHT FLASH
1200
2:00
h : nmi
LUMENS
OVER DRIVE
600
4:30
h : nmi
LUMENS
HIGH
300
9:30
h : nmi
LUMENS
MEDIUM
65:00
h : nmi
LUMENS
LOWDAY FLASH
700
70:00
h : nmi
LUMENS
Power Pack
+
Compatible
Mounng Radar Drive Rearti
Do not block the illuminaon range or radar field of detecon with re or any parts of the bike.
Knobby res may affect radar efficacy when too close to field of detecon.
Note: The package includes two mounng strap lengths and two adapter types – suitable for D-shape or aero seatposts. The
mount is designed for seatpost diameters ranging from 20 to 70 mm.
For large Aero-style handlebars mounng.
Customers will need to upgrade the strap to Mounng Strap Macro/Super/Deca/Mega.
For GoPro-style mounng.
Customers will need to purchase aermarket GoPro LED Adapter.
The shorter strap is designed for Round seat posts and smaller sized
D-shaped seat posts.
Round Post Mounng
D-Post Mounng
Aero Post Mounng
The longer strap is specifically designed for Aero Style or Large
D-shaped seat posts.
aero post adapter
D-Post adapter
Seatpost
Seatpost
Seatpost
Seatpost
10
16:00
h : nmi
LUMENS
80
9:00
h : nmi
LUMENS
50
20:00
h : nmi
LUMENS
300
18:00
h : nmi
LUMENS
80
4:00
h : nmi
LUMENS
30
9:00
h : nmi
LUMENS
150
LUMENS
120
LUMENS
CAR ALERT SOLID
FLASHDAY FLASH
LOW
NIGHT FLASHHIGHMEDIUM
CAR ALERT FLASH
Run Times and Modes
Radar Drive Operatn io
React Drive Operatn io
Please remove protecve film from the lens to ensure the device can funcon properly. Protecve film is designed to be
removed before first use.
The Radar Drive is switched on and off using the buon at the top of the unit. Press and hold the buon for 2 seconds to turn
the light on. A short press allows you to switch between operang modes.
Press and hold the buon for 5 seconds unl LED flashes then release hold to turn the light and radar system off.
Please remove the protecve film from the lens to ensure opmal performance.
The React Drive is switched on and off using the buon at the top of the unit. Press and hold the buon for 2 seconds to turn the
light on. A short press allows you to switch between operang modes.
Press and hold the buon for 5 seconds unl LED flashes then release hold to turn the light and Radar system off.
74908-EMANUAL FOR Y19 RADAR REACT SYSTEM-EN-R0B1
More Information
For more informaon about Lezyne products, please visit: ride.lezyne.com
EU SINGLE POINT OF CONTACT
Lezyne Europe GmbH
Rolandstrasse 4
14129 Berlin, Germany
CORPORATE HQ
Lezyne USA, Inc.
5470 Kietzke Lane, Suite 300
Reno, NV 89511
CALIFORNIA OFFICE
Lezyne USA, Inc.
645 Tank Farm Rd., Suite F,
San Luis Obispo, California
93401
TAIWAN BRANCH / MANUFACTURER
Lezyne USA, Inc. - Taiwan Branch
No.162, Shigu Lane
Guozhong Road, Dali District
Taichung City 412, Taiwan, ROC
For all inquiries, contact: support@lezyne.com
READ ENTIRE MANUAL BEFORE OPERATION to ensure proper use and care of your new Lezyne LED light. Traffic laws mandang
lighng may vary in your country of residence. The user should ensure the product is used in compliance with all applicable local
laws and regulaons in their area.
Radar Drive rear
React Drive front
Radar Drive rear
Radar Drive rear
React Drive front
React Drive front
Video Tutorial
Scan QR Code to watch the step-by-step video tutorial
on how to set up and use the Radar React System.
The Radar React System is a radar device equipped with Bluetooth® and ANT+® connecvity designed to enhance rider safety by
increasing situaonal awareness on the road. The front and rear lights improve visibility, while the radar communicates with
compable , smartphones and/or the React Drive front light to provide real-me vehicle detecon alerts.GPS cycling computers
Connects to: Lezyne Radar Ally app,
compable ANT+® head units, React Drive front light.
Dual Bluetooth® and ANT+® wireless system.
Battery Warnings
Charging and Operation Warnings
Radar Detection
Warnings
Device Care
detect rear approaching traffic
(Radar Rear)
flash alert to driver (Radar Rear)
visual + audio alerts for rider
(React Front)
••••••
••••••
•••
Radar Drive
+
GPS device
Radar Drive
+
Radar Ally App
Radar Drive
only
Radar React
System
Radar React
System
+
Radar Ally App
Radar React
System
+
GPS device
for traffic from behind
for rider
---
•
•
----
visual + audio alerts for rider
(App)
visual + audio alerts for rider
(GPS)
••----
Understanding the React Drive visual alert pattern
car approaching
distance
from back
Threat Type
React Drive Sequence
and Alert Mode
Indicator Mode
React Drive Buzzer
Single Tone: play once
Mul Tone: repeat
BEEP
RED LED
car relave
speed
interacve
video
150m-50mNormalRed flash every secondBlink
Solid
Fast Blink
Fast Blink
Tone with pause for 1.7 second
50m-0m
Normal-closeRed illuminate Tone with pause for 0.8 second
150m-50m
High SpeedRed flashes: 1 long+ 2 shortTone with pause for 1.7 second
50m-0m
High Speed-closeRed flashes: 1 long+ 2 shortTone with pause for 0.8 second
> 60kph
< 60kph
< 60kph> 60kph
3. Standalone Mode (No Device Connecon Required)
In this configuraon, the Radar Drive funcons independently without the need to pair to any external device.
● Once powered on, the Radar Drive can detect approaching vehicles up to 150 meters (164 yards) from behind.
● When a vehicle is detected, the light will automacally enter a flashing paern engineered to deliver a visible alert to
the approaching car enhancing your safety on the road.
Step 1: Turn on the Radar Drive
● Press and hold the power buon for 2 seconds unl the light turns on.
● Keep the device within 1 meter of your smartphone.
Step 2: Launch the Lezyne Radar Ally app
● Ensure is enabled on your smartphone.Bluetooth®
● Accept the safety disclaimers.
Step 3: Pair the Device
● Within the App: Follow the on-screen instrucons to complete the pairing.
● Tap connect on the RADAR DRIVE as it appears on the CHOOSE YOUR DEVICE screen.
● Once paired, the app allows you to control the light’s power and modes directly from your smartphone.
● Your phone will now act as a head unit for the connected Radar Drive. It will display the informaon
transmited via showing real-me tracking of rear-approaching vehicles seen by your Radar DriveBluetooth®
with visual and audible noficaons when a vehicle is detected.
NOTE:
● Without a React Front light, Lezyne Radar Ally app or GPS bike computer, you will not receive audio or visual feedback for
radar contacts.
● Suggested use case is to pair to Smartphone app or GPS bike computer to receive audio and visual feedback.
Lezyne Radar and React Drive are compable with GPS cycling computers that support Radar and/or ANT+®ANT+®
Light Controls. Please review your manufacturer’s direcons on how to pair and use Radar devices and/or ANT+®
ANT+® Lighng devices.
Once paired with your compable device, you will be able to get live radar noficaons through your GPS ANT+®
cycling computer.
Pairing Radar Drive
1. Pairing Radar Drive with Radar Ally smartphone app (via Smartphone app mode - Bluetooth®)
Requirements:
●Compable ANT+® bike computer
Requirements:
● Smartphone (iOS or Android)
● Lezyne Radar Ally app (download from App Store for iPhone or Google Play for Android).
2. GPS Cycling HeadUnit Mode (ANT+® Pairing)
Lezyne Radar and React Drive are compable with GPS cycling computers that support Radar and/or ANT+®ANT+®
Light Controls. Please review your manufacturer’s direcons on how to pair and use Radar devices and/or ANT+®
ANT+® Lighng devices.
Once paired with your compable device, ANT+®the will receive detecon data from the Radar Drive via GPS device
ANT+®, displaying visual alerts and audible noficaons to warn the rider. At the same me, the will React Drive
receive the same signal via , triggering its rear red back cap light and audible alerts when a vehicle Bluetooth®
approaches from behind.
Requirements:
● Compable ANT+® bike computer
USB-C charge
Charging Radar Drive Rear
Charging React Drive
NOTE:
● supports pass through charging.React Drive Front
● does not support pass through charging.Radar Drive Rear
Indicator for React System Pairing Status
AluminumComposite Matrix
FCC ID : 2AD4S-1LED43F
IC : 20084-1LED43F
CAN ICES-003(B) / NMB-003(B)
FCC ID : 2AD4S-1LED43R
IC : 20084-1LED43R
CAN ICES-003(B) / NMB-003(B)
MMEMRYODE O: The light remains in the output seng it is switched OFF in.
THOTCTN: ERPRMAL EIOIf the operang temperature of the light is too high, the light automacally lowers the lumen output.
Seatpost
Do not remove or aempt to remove the baery. Disassembling device will void warranty.
In U.S. and U.K., Lezyne LED Lights carry a two (2) year warranty from the original purchase date to the original owner (proof of
purchase required). Lezyne Baeries carry a six (6) month warranty from the original purchase date. Lezyne warranes cover any
manufacturing defects in materials or workmanship. Issues not covered by warranty include normal wear & tear, improper
installaon, aempng to access or modify electronics, damage or failure due to accident, misuse, abuse and/or neglect.
For all warranty issues worldwide, please contact the retailer that sold the product.
For any warranty quesons contact: warranty@lezyne.com
You can receive visual and audio alerts from your React Drive front light when paired with a Radar Drive. When the two
lights are connected, a GPS computer or phone app is not needed to receive radar vehicle alerts. There is a rider-facing back
cap with LED lights and a speaker built into the React Drive front light.
The React Drive must be paired with the Radar Drive via Bluetooth® using the Lezyne Radar Ally app to establish the
connecon between the lights. Once the connecon is established through the app, you are able to use the light
combinaon without bringing your phone with you on the ride or connecng to a GPS bike computer.
To use your Radar React System without a phone or GPS cycling computer. Both front and rear lights must be turned on for
the system to funcon.
Radar Drive is compable with GPS cycling computers that support ANT+® Radar and/or ANT+® Light Controls. Please review
your manufacturer’s direcons on how to pair and use ANT+® Radar devices and/or ANT+® Lighng devices.
Once paired with your compable ANT+® device, you will be able to get live radar noficaons through your GPS cycling
computer.
NOTE: If you have connected your Radar React System (front and rear lights) to an ANT+® bike computer, you will sll need
to pair them together in the Radar Ally app to establish the Bluetooth connecon in order to receive vehicle detecon alerts
from your React Drive front light. This is a one me setup.
USB-C Cable Not Included
Before using your Lezyne React Drive front light for the first me, fully charge the baery.
It is recommended to use a wall charger for best results.
To charge your light:
If buon does not flash when plugged in, selected USB-C port may not be powered—try another USB-C port.
Light will be charged aer 6–9 hours or 4.5–7with HE charging.
Light is fully charged when the buon indicator illuminates solid green or blue.
5.Remove light from charger and reinstall USB-C protecve cover—ensure USB-C protecve cover is fully installed
for water resistance.
1.Switch light OFF
2.Remove USB-C protecve cover
3.Connect USB-C cable and light to powered USB-C port
4.Once charging, buon will flash green; if USB-C port is capable, light will use High Efficiency (HE) charging
and buon will flash blue
ChggFlChgarinuly ared
Flashes greenIlluminates green
ChggFlChgarinuly ared
High Efficiency (HE) charging
Flashes blueIlluminates blue
Recharge the baery immediately when the indicator turns red.
An LED located in the buon displays current baery status while light is ON.
When light is OFF, click buon once to momentarily display baery status.
Illuminates green
10%0-80
Illuminates yellow
or orange/green
80-55%
Illuminates orange
55-20%
flash orange
20-0%
The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits.
The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.
This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions. (antennas are greater than 20cm from
a person's body).
La puissance de sortie emise par l’appareil de sans l est inferieure a la limite d'exposition aux frequences radio d'Industry Canada (IC).
Utilisez l’appareil de sans l de facon a minimiser les contacts humains lors du fonctionnement normal.
Ce peripherique a egalement ete evalue et demontre conforme aux limites d'exposition aux RF d'IC dans des conditions d'exposition a des appareils mobiles
(antennes sont superieures a 20 cm a partir du corps d'une personne).
The simplied EU declaration of conformity referred to in Article 10(9) shall be provided as follows:
Hereby, Lezyne declares that the radio equipment of type, Information Technology Equipment, is in compliance with Directive 2014/53/EU.
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and
installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Do not operate or store
the GPS unit below -20° Celsius (-4° Fahrenheit) or above 60° Celsius (140° Fahrenheit). Storing the GPS unit in the direct sunlight or inside a parked vehicle can
violate the temperature maximums. Battery life and battery health may be adversely affected at temperature extremes.
Radio Frequency (RF) Exposure Informaon
Informaons concernant l’exposion aux frequences radio (RF)
SIMPLIFIED EU DECLARATION OF CONFORMITY
FCC RF EXPOSURE MPE WARNING
Do not charge or operate in enclosed environments. Ambient temperatures outside the range of -10°C to 45°C may affect
baery performance and charging duraon.
ChggFlChgarinuly ared
Flashes greenIlluminates green
Before using your Lezyne Radar Drive for the first me, fully charge the baery.
It is recommended to use a wall charger for best results.
To charge your light:
NOTE: When plugged into a charger, ANT+® broadcasng is off, Bluetooth® broadcasng is off, and Radar funcon is off.
If buon does not flash when plugged in, selected USB-C port may not be powered—try another USB-C port.
Light will be charged aer hours or when buon illuminates solid green.3–5
5.Remove light from charger and reinstall USB-C protecve cover—ensure USB-C protecve cover is fully installed for water
resistance.
1.Switch light to OFF mode.
2.Open the dust cover to access the USB-C charging port.
3.Connect USB-C cable and light to powered USB-C port.
4.Once charging, buon will flash green.
LED
When the light is ON:
•Press and hold the buon for 2 seconds: the light will turn off, radar funcon/Bluetooth®/ANT+® remain on.
•Press and hold the buon for 5 seconds: the light, radar funcon, Bluetooth®, and ANT+® will all turn off.
When the light is Standby:
•Press and hold the buon for 2 seconds: the light will turn on.
•Press and hold the buon for 5 seconds: the light, radar funcon, Bluetooth®, and ANT+®
will all turn off.
When the light is OFF:
•Press and hold the buon for 2 seconds : the light, radar funcon, Bluetooth®, and ANT+®
will all turn on.
Funcon
ON
Mode
Standby
Off
••
•
--
-
Bluetooth®
& ANT+®
LED
Funcon
ON
Mode
Standby
Off
••
•
--
-
Bluetooth®
& ANT+®
Green Flash Every
2 seconds when
not connected to
wireless
Bluetooth
®
& ANT+
®
: On
Radar detect: On
NOTE: Battery still in use
LED: Off
Bluetooth
®
& ANT+
®
: Off
Radar detect: Off
LED: Off
Bluetooth
®
& ANT+
®
: ON
Radar detect: ON
LED: ON
2 sec
Off
mode
standby
mode
2 sec
(or use App/GPS
to operate)
(or use App/GPS
to operate)
On
mode
5 sec
(until flash)
5 sec
(until flash)
Solid
illumination when
still connected to
phone app or bike
computer
Green Flash Every
2 seconds when
not connected to
wireless
Bluetooth
®
& ANT+
®
: On
NOTE: Battery still in use
LED: Off
Bluetooth
®
& ANT+
®
: Off
LED: Off
Bluetooth
®
& ANT+
®
: Off
LED: Off
Bluetooth
®
& ANT+
®
: ON
LED: ON
Solid
illumination when
still connected to
phone app or bike
computer
• This device can improve situaonal awareness. It is not a replacement for a cyclist’s aenveness and good judgement.
Always maintain awareness of your surroundings and operate a bicycle in a safe manner. Failure to do so could result in
serious injury or death.
• The Radar detects approaching vehicles up to 150 meters (164 yards) away.
• The Radar detects approaching vehicle speed from 8 to 131 Km/h (5 to 81 mph) relave to rider speed.
NOTE: The radar does not detect vehicles traveling at the same speed as the rider.
• The radar beam angle width is 35 degrees. It provides radar coverage for typical bends in the road.
• Radar detecon is designed for an outdoor seng. Radar detecon does not work indoors or when not properly mounted
to a bike. False alerts can be triggered by detecon oversaturaon when mounted improperly or used indoors.
• Make sure Radar Drive lens is clear of any dirt or debris as it can affect detecon performance.
• There can be no obstrucons blocking the Radar Drive taillight. e.g. re, fenders and/ or saddle bags.
• On very curvy and/or hilly roads, the device signal and performance can get interrupted by the physical blocking of the
signal and not being able to see the target.
NOTE: Radar has to have a clear line of sight to display the target alerts.
• Be sure to follow all local rules and regulaon regarding the use of bike lights when using the Radar React System.
WARNING! This product contains a Lithium-ion baery. If these warnings are not followed, baeries may experience a
shortened life span, may present a risk of fire, chemical burn, electrolyte leak, damage to the device, and/or personal Injury.
•Do not short circuit terminals, over charge the baery or force discharge.
•Do not expose the baery to fire, explosion, or other hazards.
•Do not ingest, insert, swallow or lick any part of the baery. Seek immediate medical aenon if any is suspected. Can lead to
severe injury or death. Call local poison control center for treatment informaon.
•Baeries should never be discarded as ordinary trash or be incinerated - best disposal method is recycling in accordance with
government, state and local regulaons.
•Avoid exposing to humid condions for extended period of me.
•Avoid mechanical or electrical abuse – Do not use the baery if it has been dropped or physically damaged.
•Avoid storing baeries in enclosed or airght spaces where heat can build up, as this can increase the risk of overheang.
•Risk of irritaon occurs only if the cell is mechanically, thermally or electrically abused to the point of compressing the enclosure.
If this occurs, irritaon to the skin, eyes and respiratory track may occur. Seek local medical aenon if this is the case.
•For disposal recommendaon: observe local, state and federal law and regulaons.
•Store device or baery in a cool, dry place with good venlaon.
•Clean with water and a so cloth for best results.
•Do not use a rough cloth or any material that can scratch the opcal lens. Scratching the opcal lens can cause poor
radar performance.
•Avoid the contact of chemical cleaners, solvents, sunscreen, insect repellents that can damage plasc or rubber components.
•Never use a high-pressure hose or air nozzle to clean the device.
•CAUTION - Radar React and Smart Connect lights can be manually switched on through the phone app. USE CAUTION not to
accidentally switch on device when stored away.
This device is intended to enhance the situaonal awareness when used properly. If used improperly, you could become
distracted by the display, which could lead to an accident, causing serious personal injury or death. Only access the
informaon displayed on the device with a glance. Always maintain awareness of your surroundings and do not stare at the
display or become distracted by the display. Focusing on the display could prevent you from avoiding obstacles or hazards.
•Do not look directly into LED beam or Shine LED beam into any eyes of another person. Doing so may cause injury.
•Device emits bright lights and flashes. Please consult your physician if you have epilepsy or are sensive to bright or
flashing lights.
• KEEP BATTERIES AWAY FROM CHILDREN. Never put baeries in the mouth or in any part of the body. Severe or fatal injuries can
occur within 2 hours. Seek medical aenon immediately.
•IPX7 water resistance rang under IEC standard 60529.
•Submerging the device is not recommended. If moisture enters light housing – air out unl completely dry.
•There can be no obstrucons blocking the rear radar light for radar funcon to work as designed.
•DO NOT ATTEMPT TO REMOVE ELECTRONICS. Doing so will void warranty.
•Failure to follow these instrucons could cause personal injury and / or physical damage to equipment or surroundings.
•If the LED emiers fail or no longer funcon, disconnue use of the light. Refer to Warranty secon for service opons
•CA PROPOSITION 65 WARNING: This product may contain chemicals known to the State of California to cause cancer and birth
defects or other reproducve harm (California law requires this warning to be given to customers in the State of California). For
more info: www.lezyne.com/prop65
Other
Waantyrr
•Do not charge the device or baery if it is frozen or below 0 °C (32 °F).
•Do not cover the charger or device while charging, as this can cause overheang.
•If the baery becomes excessively hot, emits an odor, or shows signs of damage, stop use immediately.
•Charging Temperature range: from 0 °C to 45 °C (from 32°F to 113°F)
•Operang Temperature range: -10 °C to 45 °C (from 14°F to 113°F)
• Do not store the device or baery in direct sunlight or near a heat source. Baery life and baery health may be adversely
affected by extreme temperatures over 60°C or 140°F.
•It is the customers responsibility to ensure the device is within the approved operang temperature range.
7-B14908
E-MANUAL - - RADAR REACT SYSTEM (RADAR DRIVE + REACT DRIVE)
EN
Radar React System
Video Tutorial
RADAR REACT SYSTEM
RADAR REACT SYSTEM
flashreegn
flashreegn
Illuminates baery
level color
with Bluetooth
®
or ANT+
®
Pairing
w/o Bluetooth
®
or ANT+
®
Pairing
LED
React/Radar
indicator
Baery
level color
Baery
level color
flash
green
Funcon
ON
Mode
Standby
Standby
(over phone App or GPS)
(over phone App or GPS)
with Bluetooth or ANT+ Pairing
w/o Bluetooth or ANT+ Pairing
Off
•
•
•
••
•
-
--
-
--
-
Radar
detect
Bluetooth®
& ANT+®
On
mode
Bluetooth
®
& ANT+
®
: ON
Radar detect : ON
LED: ON
Radar detect: On
NOTE: Battery still in use
LED: Off
standby
mode
Bluetooth
®
& ANT+
®
: Off
Radar detect: Off
LED: Off
Off
mode
Illuminates baery
level color
off
off
Illuminates baery
level color
Illuminates baery
level color
Mounng React Drive Frontti
80-35%
Illuminates yellow
or red/green
35-10%
Illumnts iaered
10%0-80
Illumnts gniaeree
10-0%
Flash red
Radar Drive
MODE control
React Drive
MODE control
Radar Drive
On / Off
App/Device settings menu
React Drive
On / Off
React Drive front light
back cap brightness control
Viewing Radar on Lezyne Radar Ally App
While on a ride with vehicles approaching from behind and your Radar Drive is paired to the Lezyne Radar Ally app, the
Radar informaon is shown as moving car icons in the app screen. These car icons dynamically move up the app screen
depending on posion and velocity to you as a rider.
Settings / App Function:
Red highlights indicates:
High Theat level 50m - 0m
Green highlights indicates:
All Clear
No color highlights indicates:
Normal Threat level
50m
50m
Orange highlights indicates:
High threat level 150m - 50m
The vehicle posion of the cars moves up the screen as a vehicle gets closer to you on your bike. The threat level banner on
the sides changes colors based on the potenal threat level of the car approaching you from behind.
150m
0m / End line
0m / End line
Lezyne Radar App
1. Blinking mode = contact 150m-50m back (normal threat)
3. Solid mode = 50m-0m (contact directly behind you). Switches to solid illuminaon for a contact that is within 50 meters of
you as a rider.
2. Fast blinking mode = 150m – 0m (high threat)
Switches to this high threat mode when a car is approaching you 60 kph faster than your relave speed.
Switches back out of this mode if approaching car speed drops to 45 kph relave to your speed.
The React Drive back cap will visually alert you to rear-approaching vehicles like shown below.
Click the Play buon for an interacve look at each visual alert.
50m
150m
0m / End line
Solid mode
Fast blink mode
Blinking mode
On
mode
standby
mode
NOTE: Battery still in use
LED: Off
standby
mode
2 sec
5 sec
(until flash)
2 sec
Charging time
Model
Charging
Power
18W
(9V2A)
4h:30m
5h:00m
7h:00m
9h:00m
15W
(5V3A)
10W
(5V2A)
5W
(5V1A)
REACT DRIVE
1200
Standard Charging
High Efciency (HE) Charging
5 sec
(until flash)
Lezyne Radar App
Scan for AppScan for App
Scan for AppScan for App
Ant+
®
compatible
GPS Computers
Seatpost
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Any Changes or modications not expressly approved by the grantee of this device could void the users authority to operate the equipment. This
device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference recieved, including interference
that may cause undesired operation of the device.
This device complies with Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may notcause interferenceand (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Canada, avis d’Industry Canada (IC) Cet appareil est confrome avec Industrie Canada exceptes de licence RSS stadard(s). Son fonctionnement est
soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer d’interference et (2) cet appareil doit accepter toute interfence,
notamment les interferences qui peuvent affecter son fonctionnment.
Note
Labeling Requirement Noce:
Canada, Industry Canada (IC) Noces:
CAN ICES-003(B) / NMB-003(B)
Product specificaties
| Merk: | Lezyne |
| Categorie: | Fietslamp |
| Model: | React Drive |
Heb je hulp nodig?
Als je hulp nodig hebt met Lezyne React Drive stel dan hieronder een vraag en andere gebruikers zullen je antwoorden