La Crosse Technology WT-62U Handleiding

La Crosse Technology Thermometer WT-62U

Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology WT-62U (3 pagina's) in de categorie Thermometer. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3

WT-62U Digital Window Thermometer

Features:

• Clear functional design

• Easy to read outdoor temperature from indoors

• Maximum and minimum values with auto reset

• Easy to mount

• Weather resistant

Specifications:

Measuring range: -22 ºF to +122 ºF

Resolution: 0.2 ºF

Temperature Updating Interval: Every 10 Seconds

Battery: 1 AAA

Inserting the Battery:

1. The battery cover is located on the back of the

thermometer.

2. Using your fingers slide the battery cover off of the battery compartment.

3. Observing the correct polarity insert one AAA battery into the battery compartment.

4. Replace the battery cover.

Setting the Time:

1. Press the MODE button to enter the setting mode.

2. The hours digits will flash in the center of the display.

3. Press and release the + button to advance the hour.

NOTE: When in the hours between midnight and noon, A.M. will be displayed on the left of the display. When in the

hours between noon and midnight P.M. will be displayed on the left side of the display.

4. Press and release the MODE button to conrm the hour and advance to the minute setting.

5. The minutes digits will flash at the bottom of the display.

6. Press and release the + button to advance the minute.

7. Holding down the + button will advance the minutes faster.

8. Press and release the MODE button to conrm the minutes and exit the time setting mode.

NOTE: The thermometer will automatically time out and return to the normal display mode after approximately 30

seconds.

Installation:

1. Select your location for mounting in an area that is easy to view.

NOTE: The design of the thermometer is such that the display will appear

darker when looking at an upward angle at the display. It is recommended to

mount the thermometer slightly above eye level to ensure the best viewing of

the display.

2. Clean the glass surface completely before mounting.

NOTE: Be sure to completely clean the surface of dust and dirt and let the

area dry completely prior to mounting the thermometer. Failure to do

so may result in bad adhesion between the window and holder.

NOTE: Before continuing please be sure the time is set – See the previous

section on Setting the Time

3. Remove the plastic from the adhesive strip.

4. Press the adhesive strip against the glass to adhere the thermometer.

Please note: In order to obtain the most accurate temperature reading be

sure to mount the thermometer out of direct sunlight. Mounting the unit in

direct sunlight will cause artificially high temperature readings.

Use and MAX/MIN temperatures:

• The upper display shows the current temperature.

• The lower left display shows the minimum temperature.

• The lower right display shows the maximum temperature.

• The maximum temperature automatically resets at 8:00 A.M.

• The minimum temperature automatically resets at 8:00 P.M.

• If the time is not set the maximum and minimum temperature will not

be reset at the correct local time.

Maintenance:

• Replace the battery when the display becomes weak. * The low battery indicator will appear when the batteries

need to be changed.

• Do not expose the instrument to extreme temperatures, vibration or shock

• Clean the thermometer with a soft damp cloth only. Do not use solvents or scouring agents.

• Please do not try to repair the unit. Contact the original point of purchase or La Crosse Technology Warranty for

repair/ replacement instructions.

WARRANTY INFORMATION

La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship.

This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original

purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service

procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be

presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center.

La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or

products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse

Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and products assume the remaining original warranty, or

ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. If

necessary repairs are not covered by this warranty, or if a product is examined which is not in need or repair, you will be charged for the repairs or

examination. The owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd

authorized service center. La Crosse Technology, Ltd will pay reasonable return shipping charges to the owner of the product.

Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the following specified exceptions: (1) damage caused by

accident, unreasonable use or neglect (including the lack of reasonable and necessary maintenance); (2) damage occurring during shipment (claims

must be presented to the carrier); (3) damage to, or deterioration of, any accessory or decorative surface; (4) damage resulting from failure to follow

instructions contained in your owner’s manual; (5) damage resulting from the performance of repairs or alterations by someone other than an authorized

La Crosse Technology, Ltd authorized service center; (6) units used for other than home use (7) applications and uses that this product was not

intended or (8) the products inability to receive a signal due to an l defects within the product y source of interference.. This warranty covers only actua

itself, and does not cover the cost of installation or removal from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by