La Crosse Technology WS-9029U-IT-CAMO Handleiding

Bekijk gratis de handleiding van La Crosse Technology WS-9029U-IT-CAMO (2 pagina’s), behorend tot de categorie Weerstation. Deze gids werd als nuttig beoordeeld door 35 mensen en kreeg gemiddeld 5.0 sterren uit 5 reviews. Heb je een vraag over La Crosse Technology WS-9029U-IT-CAMO of wil je andere gebruikers van dit product iets vragen? Stel een vraag

WS- -9029UIT www.lacrossetechnology.com/support Page | 1

Model: WS-- 9029U IT

Instruction Manual

DC: 011515

WIRELESS TEMPERATURE STATION

Setup with Multiple Sensors

Observe correct polarity when inserting batteries. Note: When only using one sensor, use steps 1, 2 and 5.

Step 1: Insert 2 fresh AA, LR6 1.5 volt batteries into sensor 1.

Step 2: Insert 2 fresh AA, LR6 1.5 volt batteries into the temperature station

Step 3: When outdoor temperature appears, insert 2 fresh AA, LR6 1.5 volt batteries into sensor 2

Step 4: When channel 2 appears, insert 2 fresh AA, LR6 1.5 volt batteries into sensor 3

Step 5: Keep the temperature station and all sensors together for 15 minutes. All three sensors should be displayed in the

first minute.

Restart: If the outdoor temperature is not displayed after 3 minutes, remove batteries from the wireless temperature station & all

outdoor sensors. Press any button on the wireless temperature station 20 times. After 15 minutes, return to above. Step 1

Outdoor Temperature Reception Icon/Channel Indicator

The outdoor temperature reception icon will flash every second when searching for the sensor.

 Once connected, once every 4 seconds when outdoor temperature update is received.

 The channel indicator will show below the reception icon.

 Press the button to view sensors on other channels. CH

Note: Channel 1 will not show if only one sensor is connected.

Set Time, Date, Temperature Units, Forecast Sensitivity

1. Press and hold the SET/CH button for 5 seconds.

2. “12h” or “24h” will ash in the TIME section of the LCD. Press and release the MIN/MAX/+ button to select 12/24 hour time.

3. Press and release the /CH button once. SET

4. The will ash. Press and release the MIN/MAX/+ button to advance the hours. hour

5. Press and release the SET/CH button once more, and the will ash. Press and release the MIN/MAX/+ button to minutes

advance the minutes.

6. Press and release the SET/CH button to conrm selections and exit.

Note: Selecting 12 hour time will automatically select Fahrenheit (°F) temperature.

Selecting 24 hour time will automatically select Celsius (°C) temperature

Battery

compartment

2 “AA” batteries

TX29U-IT

Temperature

Sensor

Manual Set

Time

Indoor

Temperature +

Humidity

Outdoor

Temperature +

Reception

Icon

Channel

Indicator

Battery

compartment

2 “AA” batteries

Low Battery Indicator

MIN/MAX Indicator

Wall Hang Hole

Base Stand

Buttons

Outdoor

Reception

Icon

Outdoor

Channel

Icon

2

Product specificaties