La Crosse Technology LTV-W1 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology LTV-W1 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Wind Speed Sensor
Features
• Wind speed
• Replaceable wind cups
• Blue LED flashes with each transmission
1. Twist battery cover left to remove from sensor.
2. Insert two “C” batteries into the LTV-W1 sensor
Power
W
Air V
cover
ED
Model: LTV-W1
DC: 0905217
Replace Wind Cups
1. Loosen the screw on side of cups
2. Remove cups
3. Install new cups
4. Tighten screw on flat side of stem
Specications
• Wind Speed Range: 0 - 99 mph (0-159 kMh)
• Transmission Range: 400 ft (121 m) RF 433MHz open air
• Batteries: 2-C, IEC, LR14 batteries (not included)
• Battery Life: over 24 months with reputable batteries
• Dimensions: 7.10” L x 7.10” W x 18.57” H
(18.03cm L x 18.03cm W x 47.17cm H)
Flat Side Of
Stem Up
Insert and Attach
Flat End up
• For the most accurate wind speed readings, mount the LTV-W1
sensor as the highest object for 50 feet in all directions.
• Cups should be on the top of the sensor. Mount vertically.
• The maximum wireless transmission range to the wind station is
over 400 feet (121 meters) in open air, not including walls or trees.
1. Insert mounting pole into sensor.
2. Tighten screws
3. Insert bottom of pole into mounting bracket
4. Tighten knob to secure
5. Use screws through the bottom of the mounting bracket to attach.
6. The sensor can be mounted from the bottom or side.
Alternatively:
1. Insert your own mounting pole into the sensor.
2. Tighten screws
3. Mounting bracket would not be used.
Note: Do not attempt to insert a pole into the hollow back of the
mounting bracket.
Position Wind Sensor
Sensor ID
Standalone station:
Your sensor has a bar code and ID number. This ID number locks your sensor into
your station. Follow the instructions in your station manual to delete the sensor ID
for sensor replacement.
La Crosse View™ compatible system:
The sensor ID and bar code are recognized by the La Crosse View™ app if you are using
this sensor as an add-on to your existing La Crosse View™ compatible system.
To add this sensor to your existing La Crosse View™ compatible system:
1. Open your La Crosse View app to add sensors.™
2. From Main Menu - select “Devices” under “Add/Edit”
3. On Edit Devices page - select “ADD DEVICE”
4. Scan Device ID - Scan the bar code on your sensor or press inside the Device ID search box to enter
your code manually. Once entered, select “Search”.
5. On Confirm Device page - Confirm the sensor image and model number are correct and select “YES”
6. On Enter Device and Location Names page - enter Device Name and select a location or enter
a Location Name for your sensor. Select “DONE”.
Note: This sensor cannot connect to the La Crosse View app without a La Crosse View compatible
station. Station’s that are La Crosse View compatible have built-in Wi-Fi capabilities that send your
sensor’s data to the La Crosse View app. For more information about our new connected stations visit:
http://www.lacrossetechnology.com/products/connected
JOIN THE CONVERSATION
Follow us on our social media outlets for the latest promotions, product support, and awesome
giveaways.
Let’s Be Social!
If you have ideas for features or support solutions you’d like to see us make, please let us know! We tru-
ly want to make owning a La Crosse Technology product not only a practical experience, but also a fun
one. So email us at: store@lacrossetechnology.com
Help Us, Help You!


Product specificaties

Merk: La Crosse Technology
Categorie: Niet gecategoriseerd
Model: LTV-W1

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse Technology LTV-W1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd La Crosse Technology

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd