La Crosse Technology 30040 Handleiding

Bekijk gratis de handleiding van La Crosse Technology 30040 (2 pagina’s), behorend tot de categorie Wekkerradio. Deze gids werd als nuttig beoordeeld door 59 mensen en kreeg gemiddeld 5.0 sterren uit 3 reviews. Heb je een vraag over La Crosse Technology 30040 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Page 3Page 2

For more information and support visit: http://bit.ly/30040_alarm

1.8INCH LED

ALARM CLOCK

POWER UP

1. Insert the 120 volt power cord into an outlet.

Optional: Insert 1 “AA” battery (sold separately) for backup.

2. The Time Display will flash 12:00, an indication to set the time.

TIME SETTING

Continuously hold down the TIME Button while setting your hour

and minutes.

1. While holding the TIME Button, press the HOUR Button to

set your hour. The PM Indicator will appear when you Note:

advance to PM time.

2. While holding the TIME Button, press the MINUTE Button to set

your minutes.

3. When the correct time is shown on the display, release the

TIME Button.

ALARM TIME SETTING & OPERATION

Continuously hold down the ALARM Button while setting your

alarm hour and minutes.

1. While holding the ALARM Button, press the HOUR Button

to set your alarm hour. The PM Indicator will appear Note:

when you advance to PM time.

2. While holding the ALARM Button, press the MINUTE Button

to set your alarm minutes.

3. When the correct alarm time is shown on the display, release

the ALARM Button.

4. Move the Alarm ON/OFF Switch to the ON position to turn

the alarm on. The Alarm Indicator will appear when the Note:

alarm is on.

5. The alarm will sound for 8 to 9 minutes before shutting o

automatically. Manually turn o an alarm by moving the

Alarm ON/OFF Switch to the OFF position.

SNOOZE

When alarm sounds, press the SNOOZE Button to silence alarm for

9 minutes. Snooze function can be repeated many times if desired.

BATTERY BACKUP

• Insert 1 “AA” battery (sold separately) into the Battery

Compartment on the bottom of the clock. This will keep

your time and alarm settings saved until power is restored.

• The LED display will not light-up and the alarm will not sound

at the preset alarm time until power is restored.

Note: If there is no battery installed and the power is interrupted,

the display will flash 12:00 and the time and/or alarm will need

to be set again.

STAY IN TOUCH

Ask questions, watch set up videos, and provide feedback on our social media

outlets. Follow La Crosse Technology on Youtube, Facebook, Instagram, and

X (Twitter).

POWER REQUIREMENTS & DIMENSIONS

Power: 120V Power Cord

Battery Backup: “AA” battery (not included)

Dimensions: 5.98" L x 2.76" W x 4.09" H

15.19 cm L x 7.01 cm W x 10.39 cm H

MODEL: 30040

DC: 020824

Product specificaties