La Crosse Technology 30029-USB Handleiding

Bekijk gratis de handleiding van La Crosse Technology 30029-USB (2 pagina’s), behorend tot de categorie Wekkerradio. Deze gids werd als nuttig beoordeeld door 19 mensen en kreeg gemiddeld 4.4 sterren uit 8 reviews. Heb je een vraag over La Crosse Technology 30029-USB of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Page 3Page 2

1.2INCH LED

ALARM CLOCK

POWER UP

1. Insert the included 5-Volt USB Power Cord into a power brick or other

USB powering device (not included), and then into the back of the

clock. Optional: Install 2 “AAA” batteries (not included) to backup time

and alarm settings.

2. The time display will flash 12:00, an indication to set the time.

TIME SETTING

1. Slide the Set Select Switch to the TIME position.

2. Use the HR button to set your hour and the MIN button set your

minutes.

Note: The PM Indicator will appear when you advance to PM time.

3. When the correct time is shown, slide the Set Select Switch back to the

LOCK position.

ALARM TIME SETTING & OPERATION

1. Slide the Set, Select, Switch to ALARM. Press the HR Button to set your

hour. The PM Indicator will appear when you advance to PM Note:

time.

2. Press the MIN button to set your minutes.

3. When the correct time is shown on the display, slide the Set, Select,

Switch to LOCK.

4. Slide the ALARM ON/OFF Switch to ON to active the alarm.

ACTIVATE/DEACTIVATE & SNOOZE ALARMS

• Slide the ALARM ON/OFF Switch to ON to active the alarm. The alarm

icon will show.

• Slide the ALARM ON/OFF Switch to OFF to deactive the alarm. The

alarm icon will disappear.

• Press the SNOOZE button to silence a sounding alarm for 8 minutes.

This can be repeated.

MODEL: 30029USB

DC: 022123

BUTTON FUNCTIONS

1. HR: Press to set the hour

2. MIN: Press to set the minutes

3. SNOOZE: Press to activate

snooze for 8 minutes

4. Set Select Switch:

TIME: Select to set Hour/Minutes

ALARM: Select to set Alarm Time

LOCK: Lock to buttons to avoid

changes

5. ALARM ON/OFF: Turn alarm on

or o

6. DC5V Jack: Power connection

7. Backup Battery Compartment

BATTERY BACKUP

• Insert 2 “AAA” battery (sold separately) into the Battery Compartment on

the back of the clock. This will keep your time and alarm settings saved

until power is restored.

• The LED display will not light-up and the alarm will not sound at the

preset alarm time until power is restored.

Note: If there is no battery installed and the power is interrupted, the

display will flash 12:00 and the time and/or alarm will need to be set again.

POWER REQUIREMENTS & DIMENSIONS

Power: 5.0V USB Power Cord (Included) & USB Power Brick (not Included)

Battery Backup: Optional 2 “AAA” Batteries (not Included)

132

45

6

7

Product specificaties