La Crosse Technology 30024 Handleiding

Bekijk gratis de handleiding van La Crosse Technology 30024 (2 pagina’s), behorend tot de categorie Wekkerradio. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.8 sterren uit 8 reviews. Heb je een vraag over La Crosse Technology 30024 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Page 3Page 4Page | 2

.9-inch LED Alarm Clock

with USB Charging Port

Model: 30024 & 30025

DC: 011419

POWER UP

1. Insert the 120 volt power cord into an outlet, then into your

clock. Optional: Insert one 9 volt battery for backup.

2. 12:00 will flash as an indication to set the time and/or alarm.

TIME SETTING

1. Continuously hold down the TIME button, then:

• Press the HOUR button to set your hour.

• Press the MINUTE button to set your minutes.

Note: The PM indicator will appear when you advance to PM time.

2. Release the TIME button when the correct time is shown on the

display.

USB CHARGING PORT

• Connect your external device’s USB charging cable

(not included) to the USB charging port.

• USB Power Output: 5V 1A maximum current.

• Charge devices that are self-regulating.

TIME ALARM

ON: Slide the ALARM ON/OFF switch to the ON position to turn

the alarm ON. The alarm light indicator will appear.

OFF: Slide the ALARM ON/OFF switch to the OFF position to turn

the alarm OFF. The alarm light indicator will disappear.

ALARM ON/OFF

1. Continuously hold down the ALARM button, then:

• Press the HOUR button to set your hour.

• Press the MINUTE button to set your minutes.

Note: The PM indicator will appear when you advance to PM time.

2. Release the ALARM button when the correct alarm time is set.

SNOOZE

• When the alarm sounds press the SNOOZE/LIGHT button to

silence the alarm for 10 minutes.

• Snooze may be repeated.

Note: This is a Ascending alarm. It will sound with increased

frequency for 2 minutes then shut o if no buttons are pressed.

• Always purchase the correct size and grade of battery most

suitable for ntended use.

• Clean the battery contacts and also those of your clock prior to

battery installation.

• Ensure the battery is installed with correct polarity (+ and -).

• Remove battery from equipment when it is not used for an

extended period of time.

• Promptly remove an expired battery.

CARE & MAINTENANCE

BATTERY BACKUP

• Insert one “9V” battery into the battery compartment on the back

of the clock. The battery will keep the alarm and time settings

until the power is restored.

• The LED display will not light-up but the alarm will sound at the

preset alarm time.

• If there is no battery installed but the power is interrupted, the

display will flash at 12:00 and the time and alarm need to be set

again.

Power: 120V power cord

Requires one 9V battery for back-up not included

Dimensions: 5.00 ”W x 2.00”D x 2.85”H

POWER REQUIREMENTS

BACKLIGHT

Your backlight has three levels: High, Low , and Off.

• Press the SNOOZE/LIGHT button to adjust.

Product specificaties