Kwikset Powerbolt 240 Handleiding

Bekijk gratis de handleiding van Kwikset Powerbolt 240 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.5 sterren uit 4 reviews. Heb je een vraag over Kwikset Powerbolt 240 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

If drilling a new door, use the supplied template and the complete

door drilling instructions available at www.kwikset.com/doorprep.

Note: Additional door preparation may be

required for doors with 1-1/2 in (38 mm) holes.

Consult the deadbolt drilling instructions at

www.kwikset.com/doorprep.

or

backset

the door is either 2-1/8 in (54 mm) or

1-1/2 in (38 mm).

either 2-3/8 or 2-3/4 in ( 60 or 70 mm).

60 or 70 mm

2-3/8 or 2-3/4 in

35 – 44 mm

1-3/8 – 1-3/4 in

the door edge is 1 in (25 mm).

Measure to conrm that the door is

between 1-3/8 and 1-3/4 in (35 mm and

44 mm) thick.

A

B

C

BCD

Is the door edge chiselled?

54 mm

2-1/8 in

38 mm

1-1/2 in

25 mm

1 in

C

door frame

D

Install strike on the door frame.

Make sure the hole in the door frame is drilled a

minimum of 1 in (25 mm) deep.

1

Prepare the door and check dimensions

2

Install the latch and strike

1 / 4

ENGLISH

Installation and User Guide

Required tools

Ruler

HammerWood block

Additional Tools (depending on application)

A

Is the rectangular shaped hole centered in the

door hole?

Hold the latch in front of the door hole, with the latch

YESNO

No adjustment is required.

Proceed to next step.

Rectangular shaped holeRectangular shaped hole

Rotate latch face as

shown to extend latch.

or

actual size

53648

For Latch /

Strike Bag

(4x)

53648

(2x)

(For Latch/

Strike Bag

)

Latch

Strike

Key

Mounting

Plate

Parts in the box

For Latch / StrikeFor Lock

53648

53646

52502

Batteries

Collar

53733-001

Rev 01

9240

Note: Please contact customer service if door

thickness exceeds 1-3/4 in for a thick door kit.

180°

YESNO

Install latch in door with

supplied screws.

chiseled

not

chiseled

unlocked

IMPORTANT: Make sure the latch bolt is fully

retracted (in the unlocked position).

53648

(2x)

(For Latch/

Strike Bag

)

Make sure

slotted hole is at

bottom of latch.

Exterior AssemblyInterior Assembly

Transitional

ContemporaryTraditional

Kwikset Technical Support | 1-800-327-5625 | www.kwikset.com

Install latch in

door with wood

block and

hammer.

Make sure

slotted hole is at

bottom of latch.

Ensure collar

snaps into place.

Pull collar to test

for tight t.

or

Use a athead screwdriver to remove

latch face. Once removed, grip the

latch with one hand and with the

other hand twist collar o. Install

drive-in collar.

Align tabs with

holes in collar.

Screwdrivers

Product specificaties