Kuzco Halo PD22723 Handleiding
Pagina's 1 Lamp
Bekijk de handleiding van Kuzco Halo PD22723 gratis online of download de PDF. 2 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
INSTALLATION SHEET
PD22723
LED Pendant
START FROM HERE
Please Note:
•All Kuzco LED fixtures come with pre-wired LED module(s).
• Unless instructed to do so, please do not touch any part of the LED module(s) as any
unnecessary contact with the module could cause permanent damage.
• For dimming, an ELV (Electronic Low Voltage) type of dimmer is required.
•
Make sure power is completely off at the fuse box.
•
Have your fixture installed by a qualified licensed electrician
•
Prepare everything in a clear area.
•
Wear gloves at all times during this installation.
•
Read instructions carefully before you start assembly.
•
Keep this instruction sheet for future reference.
Technical Support: 1-877-452-6858
19054 28th Avenue Surrey, BC Canada V3S 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W: kuzcolighting.com
20170113
1.
2.
Remove the fixture from its original packaging. Next,
remove the mounting plate from within the (1c)
canopy by un-threading the two screws .(2a) (2d)
Secure the mounting plate to the junction box (1c)
(1a)(1d) with screws provided in the hardware
package.
Before you mount the canopy to the mounting plate
select the desired length you wish the pendant (3a)
to hang.To shorten or lengthen the pendant (3a)
push up on the canopy nipples and push/pull (2b)
on the cable, release to secure. Now loosen the set
screw (2c) until the wire can move freely. You can
now push/pull the wire to lengthen or shorten. When
you have selected the desired length, tighten the set
screw (2c).
You are now ready to mount the canopy. First,
connect all wires correctly black to black “L”, white to
white “N” and the ground wire with provided
marrettes from the hardware package Align (1b).
the threaded studs with the holes on the (1d)
surface of the canopy . Next, push the canopy (2a)
(2a)(1c) to the mounting plate thread on the two
nuts on to the threaded studs . This will (2d)(1d)
secure the canopy to the mounting plate.
You have now completed the installation of your
fixture, enjoy.
3.
4.
1a.
1b.
2a.
1c.
1d.
2b.
2c.
3a.
2d.
Product specificaties
| Merk: | Kuzco |
| Categorie: | Lamp |
| Model: | Halo PD22723 |
Heb je hulp nodig?
Als je hulp nodig hebt met Kuzco Halo PD22723 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Lamp Kuzco
Kuzco Vega CH10356 Handleiding Kuzco Eerie PD19347 Handleiding Kuzco Synergy CH93834 Handleiding Kuzco Akari CH18548 Handleiding Kuzco Halo PD22772 Handleiding Kuzco Eerie PD19359 Handleiding Kuzco Cortana PD82724 Handleiding Kuzco Latitude VL47225 Handleiding
Populair in Lamp
Handleiding Lamp
Nieuwste handleidingen voor Lamp
Allen + Roth CHL7CH Handleiding Allen + Roth CP102MBK Handleiding ColorKey Move Spot 150 Handleiding Dainolite ORA-3130LEDHP Handleiding KAWOTI 21596 Handleiding Dainolite DUL-1530LEDP Handleiding KAWOTI 21153 Handleiding KAWOTI 21518 Handleiding KAWOTI 21523 Handleiding EMOS ACCO ZS2833 Handleiding