Kramer EXT3-H-R Handleiding
Kramer
AV extender
EXT3-H-R
Bekijk gratis de handleiding van Kramer EXT3-H-R (4 pagina’s), behorend tot de categorie AV extender. Deze gids werd als nuttig beoordeeld door 18 mensen en kreeg gemiddeld 4.3 sterren uit 9.5 reviews. Heb je een vraag over Kramer EXT3-H-R of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
EXT3-H- -H-T / EXT3 R Quick Start
P/N:
2900- 301805QS
Rev:
3
scan to go to website
EXT3-H- -H-R T / EXT3 Quick Start Guide
This guide helps you install and use your EXT3-H-T / EXT3-H-R for the first time.
Go to http://www.kramerav.com/downloads/EXT3-H-T / http://www.kramerav.com/downloads/EXT3-H-R
to download the latest user manual and check if firmware upgrades are available.
Step 1: Check what’s in the box
EXT3-H-T Transmitter
/
EXT3-H-R Receiver
1 Bracket set
4 Rubber feet
1 Power adapter and cord
1 Quick start guide
Step 2: EXT3-H-T Get to know your
# ction Feature Fun
1
IN LED
Lights blue when an active source device input signal is detected.
2 OUT LED Lights blue when an active, far- end sink (acceptor) connection is detected via the
HDBT link.
3
LINK LED
Lights green when an HDBT link is established with the HDBaseT receiver.
4
ON LED
Lights green when the device receives power.
5
HDBT OUT RJ- 45 Connector
Connect to a receiver (for example, EXT3-H- R).
6
HDMI IN Connector
Connect to an HDMI source.
7
RS- 232 (G, Rx, Tx) 3- pin Terminal
Block Connector
This port has two functions selectable by the SETUP DIP- switches:
1. To send/receive RS- 232 data over the HDBaseT link.
2. For FW Upgrade.
8
IR 3.5mm Mini Jack Connector
Connect to an external infrared emitter / sensor. The IR signal is passed over the
HDBaseT link.
9
SETUP DIP-switches
Set the operation DIP- switches. Refer to Dip Switch Settings on page 3.
10
12V DC Power Connector
12V DC connector for powering the unit.
Step 3: EXT3-H-R Get to know your
# ction Feature Fun
1
IN LED
Lights blue when an active, far- end source device input signal is detected via the
HDBT link.
2
OUT LED
Lights blue when an active sink (acceptor) connection is detected.
3
LINK LED
Lights green when an HDBT link is established with the HDBaseT transmitter.
4
ON LED
Lights green when the device receives power.
5
HDBT IN RJ- 45 Connector
Connect to a transmitter (for example, EXT3-H- T).
6
HDMI OUT Connector
Connect to an HDMI acceptor.
7
RS- 232 (G, Rx, Tx) 3- pin Terminal
Block Connector
This port has two functions selectable by the SETUP DIP- switches:
1. To send/receive RS- 232 data over the HDBaseT link.
2. For FW Upgrade.
8 IR 3.5mm Mini Jack Connector
Connect to an external infrared emitter / sensor. The IR signal is passed over the
HDBaseT link.
9
SETUP DIP- switches
Set the operation DIP- switches. Refer to Dip Switch Settings on page 3.
10
12V DC Power Connector
12V DC connector for powering the unit.
Step 4: -H- -H- Mount EXT3 T / EXT3 R
Install EXT3-H- -H-RT / EXT3 using one of the following methods:
• Attach the rubber feet and place the unit on a flat surface.
• Fasten a bracket (included) on each side of the unit and attach it to a flat surface
(see www.kramerav.com/downloads/EXT3-H-T / www.kramerav.com/downloads/EXT3- H-R).
• Mount the unit in a rack using the recommended rack adapter
(see www.kramerav.com/product/EXT3-H-T /
www.kramerav.com/downloads/EXT3-H-R).
• Ensure that the environment (e.g., maximum ambient temperature &
air flow) is compatible for the device.
• Avoid uneven mechanical loading.
• Appropriate consideration of equipment nameplate ratings should
be used for avoiding overloading of the circuits.
• Reliable earthing of rack-mounted equipment should be maintained.
•
Maximum mounting height for the device is 2 meters.
Step 5: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your EXT3-H-T / EXT3-H- R. For best results, we recommend
that you always use the Kramer high-performance cables to connect AV equipment to EXT3-H- -H- T / EXT3 R.
The range between Tx & Rx is:
• – 40M 4K@60
• 70M – 4K@30
Wiring the RJ-45 Connectors
This section defines the TP pinout, using a
straight pin
- - -to pin cable with RJ 45
connectors.
EIA /TIA 568B
PIN
Wire Color
1
Orange / White
2
Orange
3
Green / White
It is recommended that the cable
ground shielding be
connected/soldered to the connector
shield.
4
Blue
5
Blue / White
6
Green
7
Brown / White
8
Brown
To achieve specified extension distances, use the recommended Kramer cables available at
www.kramerav.com/product/EXT3
-H-R / http:// www.kramerav.com/product/EXT3-H-T.
Using third
-party cables may cause damage!
Step 6: Dip Switch Settings
The DIP Switches are used to:-
• Configure the IR handling.
• -Enable RS 232 signal extension
All the DIP switches are set to OFF (Up) by default.
# Feature
DIP switch- Settings
1 IR Off (up) – IR pass through-
ON (down) – Add 38kHz modulation
2 - – - -RS 232 Off (up) RS 232 pass through ON (down) – Valens
programming
EXT3-H-T
KC
-VB 1/5
HDBT
Blu-ray
Player
IR
RS-232
Display
RS-232
HDMI
HDMI
Tx
G
Rx
RS-232
12V DC
IR SETUP
HDMI OUTHDBT IN
Tx
G
Rx
RS-232
12V DC
IR SETUP
HDMI OUTHDBT IN
Tx
G
Rx
RS-232
12V DC
IR SETUP
HDMI OUTHDBT IN
1
2
O
N
Tx
G
Rx
RS-232
12V DC
IR SETUP
HDMI OUTHDBT IN
Tx
G
Rx
RS-232
12V DC
IR SETUP
HDMI OUTHDBT IN
Tx
G
Rx
RS-232
12V DC
IR SETUP
HDMI OUTHDBT IN
1
2
O
N
EXT3-H-R
Blu-ray
Remote
Control
IR
Product specificaties
| Merk: | Kramer |
| Categorie: | AV extender |
| Model: | EXT3-H-R |
Heb je hulp nodig?
Als je hulp nodig hebt met Kramer EXT3-H-R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding AV extender Kramer
5 Augustus 2025
4 Augustus 2025
1 Juli 2025
1 Juli 2025
1 Juli 2025
1 Juli 2025
26 November 2024
26 November 2024
26 November 2024
26 November 2024
Handleiding AV extender
- Comprehensive
- CYP
- Dynaudio
- KanexPro
- Ecler
- Marshall Electronics
- WyreStorm
- SEADA
- Crestron
- Hall Research
- IMG Stage Line
- DataVideo
- Accell
- Kopul
- Roline
Nieuwste handleidingen voor AV extender
15 September 2025
15 September 2025
9 September 2025
1 September 2025
26 Augustus 2025
26 Augustus 2025
24 Augustus 2025
15 Augustus 2025
14 Augustus 2025
14 Augustus 2025