Kraken Sports Solar Flare Mini 15000 Handleiding

Bekijk gratis de handleiding van Kraken Sports Solar Flare Mini 15000 (1 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 13 mensen en kreeg gemiddeld 4.5 sterren uit 7 reviews. Heb je een vraag over Kraken Sports Solar Flare Mini 15000 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

◆ To charge the battery

◆ Warnings



1. To charge the battery, use the USB-C PD charger included with

your light.

2. Use the ports labelled USB-C1 or USB-C2 to charge the battery.

Two batteries can be charged simultaneously. : Use of port Note

USB-A while charging two batteries may cause charging to slow or

stop.

3. When the battery begins to charge the indicator light on the

battery will be RED.

4. When the battery is fully charged the indicator light on the battery

will change to BLUE.

1.Only use Li-ion battery pack provided by the manufacturer.

2.Do not open the tail cap when the video light is in the

water.

3.If the video light will not be used for a long period of time,

the battery should be removed.

Failure to comply with these warnings may result in damage

to the video light and nullify the warranty.

◆ Battery level indicator

◆ Warranty

Solar Flare Mini 15000

There are four colors to indicate the amount of power

remaining in the battery and the function modes.

Kraken provides a warranty against manufacturer defects for

1 year starting from the date of purchase. Manufacturer

defects occurring within 15 days of the date of purchase will

result in an exchange of product at the vendor. All other

manufacturer defects occurring within 1 year of the date of

purchase will be repaired at no cost. Proof of purchase is

required for warranty support. The warranty does not cover

failures or defects resulting from misuse (e.g., modification,

damage) natural disasters, or battery issuesincluding ，

incorrect battery installation.

Diving Video Light

Blue

approx. 100%~80%

Green

approx. 80%~30%

Red

approx. 30%~10%

Single Blinking Red

approx. 10%~0%

Dual Blinking

The current mode is Burst Mode

◆ Low battery warning

When the battery level is low (approximately 10 minutes remaining)

the video light will automatically decrease the brightness of the light

to conserve power. When the battery is empty, the light will power

off.

◆ Troubleshooting light issues

Before returning the light to the vendor, please troubleshoot by

doing the following:

◆ Thermal protection

Problem

Possible Solution

If the internal temperature of video light becomes too high the video

light will automatically decrease the brightness of the light.

The video light

does not turn on

* Ensure the battery is charged

* Ensure the tail cap is tightly screwed

to the light head

◆ General maintenance

Moisture or water inside

video light

Check the O-rings in the tail cap to

ensure there is no debris or damage

that could prevent a proper seal

There are two O-rings in the tail cap. Use silicone to keep the O-

rings well lubricated. It is important to lubricate the O-rings if the

video light has not been used for a period of time, or if the O-ring is

hard. Only use enough lubrication to make the O-ring shine, too

much can attract dirt. If the O-ring is damaged, broken, or deformed

it should be replaced with the spare included with your video light.

NOTE: Do not use a sharp tool to remove the O-ring.

Please read the manually carefully before using the video light

◆ Overview

◆ Specifications

Burst mode

When the light is on, press and hold the left button for second ONE

to enter burst mode at the same colour. Press and hold the left

button once again to exit burst mode and return to continuous

lighting.

The Solar Flare Mini 15000 is a metal bodied diving video light with

COB LED (15000 lumens constant / 18000 lumens burst) .

Battery

8 x 21700 Li-ion battery pack with

Type-C USB Charging Port

Brightness

White Light: 15000 lumens@CRI 90

constant / 18000 lumens burst

Function Modes

White / Burst / Flashing signal / SOS

Flashing signal mode (White):

When the light is on, press and hold the right mode for second ONE

to enter flashing signal mode . Press and immediately release the

right button to exit flashing signal mode.

Power Level

5 levels (20%,40%,60%,80%,100%)

Beam Angle

White light: 120 degrees on land / 120

degrees underwater

To turn on SOS/Strobe:

When the light is : Press the right and left buttons at the same OFF

time and hold down for seconds to enter SOS mode. TWO

Burn time

60 minutes (at 100% brightness)

LED Life

Over 50,000 hours

Depth Rating

100m / 330ft

To turn off SOS/Strobe:

Size

79 mm (D) * 238 mm (L)

Press the right and left buttons at the same time and hold down for

TWO seconds to turn off SOS mode.

Weight

1345g on land including battery

550g underwater including battery

Sleep mode:

We have also introduced sleep mode, which will let you temporarily

and quickly turn the light off and back on to previous power level. To

access sleep mode, when the light is on, press and hold the middle

button for seconds, the light will turn off. Press and hold the TWO

middle button again for seconds to stop sleep mode and turn TWO

the light back on to the same power level as before.

◆ To operate the light

Turning the light ON:

Press the right and left buttons at the same time and hold down for

ONE second to unlock the light, then immediately press and

release the middle button to turn the light on. When the light is

turned on it will be in the white light mode at 100% brightness.

◆ To install the battery

Turning the light OFF: Press the right and left buttons at the

same time and hold down for seconds.TWO

1. Twist the tail cap counter-clockwise to open.

2. Put the battery pack in the tail cap.

◆Accessories included

NoteWhen inserting battery, contact rings on battery must ：

be facing light head.

Li-ion battery pack with protection cap

Adjusting the brightness (Continuous and Burst

Mode)

When the white light is on: Press and immediately release the left

or right button to reduce or increase the

brightness(100%-80%-60%-40%-20%).

Charger/AC adapter

3.Twist the tail cap clockwise to reattach the tail to the head of the

video light.

USB type C cable

YS mount

Ball Mount

Spare O-ring x2

Left Button

YS Adapter

Light Head

Tail Cap

Right Button

Middle Button

Remote Port

Burst Port

Hang Hole lanyard

attachment eye

Product specificaties