Kraken Sports Abyss 20000 Handleiding

Bekijk gratis de handleiding van Kraken Sports Abyss 20000 (2 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.7 sterren uit 4 reviews. Heb je een vraag over Kraken Sports Abyss 20000 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

◆

◆

◆

◆◆

To charge the battery

1.Only use Li-ion battery pack provided by the manufacturer.

2.Do not open the tail cap when the video light is in the water.

Failure to comply with these warnings may result in damage

to the video light and nullify the warranty.

◆

◆

◆

◆◆

Battery level indicator

There are four colors to indicate the amount of power

remaining in the battery and the function modes.

Blueapprox. 100%~85%

Greenapprox. 85%~60%

Redapprox. 60%~10%

Single Blinking Redapprox. 10%~0%

Dual BlinkingThe current mode is Burst Mode

◆

◆

◆

◆◆

Low battery warning

When the battery level is low (approximately 10 minutes

remaining) the video light will automatically decrease the

brightness of the light to conserve power. When the battery isBefore returning the light to the vendor, please troubleshoot

empty, the light will power off.by doing the following:

◆

◆

◆

◆◆

Thermal protection

If the internal temperature of video light becomes too high the

video light will automatically decrease the brightness of the light.

There are two O-rings in the tail cap. Use silicone to keep the

O-rings well lubricated. It is important to lubricate the O-rings if the

video light has not been used for a period of time, or if the O-ring

is hard. Only use enough lubrication to make the O-ring shine, too

much can attract dirt. If the O-ring is damaged, broken, or

deformed it should be replaced with the spare included with your

video light.

◆

◆

◆

◆◆

Overview

The Abyss 20000 is a metal bodied diving video light

with COB LED (20000 lumens constant/25000 lumens burst) .

◆

◆

◆

◆◆

Warnings

◆

◆

◆

◆◆

Warranty

Diving Video Light

Problem

Possible Solution

Abyss 20000

NOTE: Do not use a sharp tool to remove the O-ring.

Please read the manually carefully before using the video light

◆

◆

◆

◆◆

Specifications

To turn on SOS/Strobe:

Moisture or water inside

video light

Check the O-rings in the tail cap to

ensure there is no debris or damage that

could prevent a proper seal

When the light is OFF: Press and hold the ON/OFF button for

TWO seconds to enter SOS mode.

WhileinSOSmodepressandimmediatelyreleaseON/OFF

Battery

8 x 21700 Li-ion battery pack (5000mAh)

with Type-C USB Charging Port

1. To charge the battery, use the USB-C PD charger

included with your light.

2. When the battery begins to charge the indicator light on

the battery will be RED.

3. When the battery is fully charged the indicator light on the

battery will change to BLUE.

Kraken provides a warranty against manufacturer defects for

1 year starting from the date of purchase. Manufacturer

defects occurring within 15 days of the date of purchase will

result in an exchange of product at the vendor. All other

manufacturer defects occurring within 1 year of the date of

purchase will be repaired at no cost. Proof of purchase is

required for warranty support. The warranty does not cover

failures or defects resulting from misuse (e.g., modification,

damage) natural disasters, or battery issuesincluding，

incorrect battery installation.

◆

◆

◆

◆◆

Troubleshooting light issues

The video light

does not turn on

* Ensure the battery is charged

* Ensure the tail cap is tightly screwed to

the light head

3.If the video light will not be used for a long period of time,

the battery should be removed.

◆

◆

◆

◆◆

General maintenance

Product specificaties