Konig VID-TRANS510KN Handleiding

Konig AV extender VID-TRANS510KN

Lees hieronder de 📖 handleiding in het Nederlandse voor Konig VID-TRANS510KN (8 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

VID-TR ANS 5 1 0 K N

MANUAL (p. 2)

5.8 GHz AV system

MANUAL (p. 5)

Sistema de 5.8 GHz AV

ENGLISH

5.8 GHz AV system

Introduction:

The 2.4 GHz frequency band is very busy due to applications like Bluetooth®, WiFi and wireless

networks. Therefore the signals of such equipment is easily distorted. That is why the VID-TRANS510

uses the 5.8 GHz frequency, to avoid any interference between such devices. Enjoy wireless video and

audio in your house. Included: infrared extension for control of connected equipment.

Description transmitter and receiver:

1. Antenna for sending and receiving

remote control RF signal

2. Channel LED indicator for showing the

operational channel

3. Channel button for setting the channel

4. Remote sensor for receiving the IR

signal of the remote control

5. Directional 5.8GHz antenna for

sending and receiving audio/video

signals

Rear view transmitter:

1. DC power input (9 VDC)

2. IR cable input

3. AV input (white: audio left, red: audio

right, yellow: video)

4. ON/OFF switch

Rear view receiver:

1. DC power input (9 VDC)

2. AV output (white: audio left, red:

audio right, yellow: video)

3. ON/OFF switch

Operation:

1. Connect the transmitter with the AV cable to the output of VCR, DVD or SAT.

2. Connect the receiver with the AV cable to the input of TV, LCD screen or Plasma.

3. Connect the adapter plug of the AC/DC adapter into the transmitter and the receiver and connect

the power plug into a 230 Volt wall outlet. Note: use the provided adapters only.

4. Select on the transmitter and receiver the desired channel with the channel button. Note: In case of

possible distortion, try another channel. For optimum performance, it could be necessary to point

the transmitter and receiver to each other in an imaginary straight line. Or replace the transmitter

and/or receiver a bit, a few centimeters/inches could already be enough to improve the sound and

picture quality. If the reception is perfect, no adjustments are necessary.

5. Turn on the connected equipment and enjoy wireless reception.

Using the remote control feature:

The 5.8 GHz system not only allows you to send audio/video from one area to another, it also gives you

the ability to control the source by using your existing remote control device. It converts the infrared (IR)

signal emitted by your remote control to a a radio frequency (RF) signal in the UHF band at the receiver

and sends it back to the transmitter where the RF signal is converted back to the original IR signal and

beamed to the audio/video source.

Use the IR cable and connect the 2.5mm plug to the input jack on the back of the transmitter (IR). Place

the IR sensor on the front of the display from the equipment that need to be controlled. It’s important to

place the IR sensor as close as possible to the IR sensor, which is behind the display, of the equipment.

Product specificaties

Merk:	Konig
Categorie:	AV extender
Model:	VID-TRANS510KN
Kleur van het product:	Zwart, zilver
Gewicht:	190 g
Soort:	AV-zender & ontvanger
Stroom:	0.25 A
Maximum resolutie:	- Pixels
Aansluiting voor netstroomadapter:	Ja
Externe adapter:	Ja
Afmetingen (B x D x H):	140 x 113 x 42 mm
Operating voltage:	9 V
Maximaal bereik:	100 m