Konig SEC-PCC10 Handleiding

Konig Bewakingscamera SEC-PCC10

Lees hieronder de 📖 handleiding in het Nederlandse voor Konig SEC-PCC10 (62 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/62

SEC-PCC10 – SEC-PCC20 – SEC-PCC30

PCI SECURITY CARD

ADVANCED

ENGLISH

MANUAL

RAM

CPU

AGP

PCI Slot1

PCI Slot2

PCI Slot3

PCI Slot4

Card 2

Card 3

d 1Car

Mother board

Installation

1. Turn off the PC’s power and unplug the power cable.

2. Open the PC’s cover and plug the capture card into an empty PCI Slot.

3. Make sure the card is firmly seated and aligned.

Note: When installing multiple cards in a single PC the total video channels may not

exceed 24 cameras. The proper card order is shown as below. The card nearest to

CPU will be the first card. Only card 1 need to be connected for Watch Dog

connection (see following page).

Watch Dog Connection

The Watch Dog Connection will allow the card to reboot the PC automatically when it

detects problems with the PC.

A) Connect the reset cable, which is connected with the motherboard, with the Watch

dog connection of the card.

B) Connect the supplied cable with the jumpers on the motherboard and the

Watchdog connection of the card.

See below figure:

4. Replace the PC’s cover and power cord and reboot the system.

5. When the Windows System reboots, the “New Hardware Wizard” dialog will appear.

Ignore the dialog . ue

Note: In Windows XP the dialog will disappear after driver installation. In Windows

2000, you will need to close the dialog ally.ue manu

6. Put the Installation CD into the CD-ROM. The Auto-run page will be displayed.

Click on “DVR SYSTEM INSTALL DRIVER INSTALL” and then the “ ” to automatically

install the driver.

A. PC Reset Button

Watch Do g

B. Supplied Watch

Dog cable B. Jumpers on

Mother Board

A. PC reset cable

Product specificaties

Merk:	Konig
Categorie:	Bewakingscamera
Model:	SEC-PCC10
Kleur van het product:	Meerkleurig
Connectiviteitstechnologie:	Bedraad
Intern:	Ja
Compatibele besturingssystemen:	Windows 2000, XP\n
Hostinterface:	PCI
Minimale processor:	Intel P4 2.4GHz
Minimale RAM:	256 MB
Output interface:	PCI