Konig CMP-RCT31 Handleiding

Konig Kabels voor pc's en randapparatuur CMP-RCT31

Bekijk gratis de handleiding van Konig CMP-RCT31 (68 pagina’s), behorend tot de categorie Kabels voor pc's en randapparatuur. Deze gids werd als nuttig beoordeeld door 32 mensen en kreeg gemiddeld 4.4 sterren uit 16.5 reviews. Heb je een vraag over Konig CMP-RCT31 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/68

TESTER KABELU LAN

LAN-KAAPELIN TESTAAJA

PROBADOR DE CABLE LAN

LAN-KABELTESTER

LAN-KABELPRÜFER

TESTER CABLU LAN

LAN-KABELTESTARE

LAN KÁBELTESZTER

TESTER CAVI LAN

TESTEUR DE CÂBLE RÉSEAU

LAN CABLE TESTER

CMP-RCT31

ENGLISH

Introduction:

This König cable tester reads the correct pin conﬁ guration of the different LAN cables, by

comparing the transmitting end to the corresponding receiving end. With the remote unit

it’s easy to test existing cables and connections. Ideal to test wires which are behind walls

or ceilings. It is easy to verify the cable continuity, open, short and cross-connect.

Features:

• Can test the correct pin conﬁ guration of 10Base-T, 10Base-2 Ethernet cable, RJ45/

RJ11 modular cables, 258A, TIA-568A/568B and Token Ring cable etc.

• Easy to read cable status and verify cable continuity, open, short and miss wiring.

• With the remote unit it’s easy to test existing cables and connections which are behind

walls or ceilings.

• Can test with grounding.

• Auto or manual scan.

Speciﬁ cations:

• Transmitter

Connections: 2x RJ45

Indication: LED

Switch: On/Off

Switch: Auto/Manual

Switch: Test

• Remote unit

Connections: RJ45

Indication: LED

• Power: 9 V Block (not included)

• Housing: Plastic

Connections:

Master

Unit

Remote

Unit

1) RJ45 jack

2) RJ45 jack

3) LED display for sourcing end (jack 1)

4) LED display for receiving end (jack 2)

5) Power switch

6) LED scanning mode switch

7) Test switch for manual scan

8) RJ45 jack

9) LED display for receiving end (same as jack 2)

10) Ground LED for receiving end

11) Battery compartment (9 V block)

Operation and connection:

Loopback test

1) 10Base-T cable test.

• Plug one end of the to be tested cable into the sourcing of the RJ45 jack

(marked with “”) and another end of the to be tested cable in the receiving RJ45 jacks.

Product specificaties

Merk:	Konig
Categorie:	Kabels voor pc's en randapparatuur
Model:	CMP-RCT31
Kleur van het product:	Zwart
LED-indicatoren:	Status
Afmetingen (B x D x H):	62 x 103 x 27 mm
Operating voltage:	9 V
Ondersteunde aansluitingen:	RJ-11, RJ-45