Kichler Regence 59129OZ Handleiding

Bekijk gratis de handleiding van Kichler Regence 59129OZ (3 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.7 sterren uit 2 reviews. Heb je een vraag over Kichler Regence 59129OZ of wil je andere gebruikers van dit product iets vragen? Stel een vraag

For warranty information please visit: kichler.com/warranty

REV 10-MAR-2023

We’re here to help 866-558-5706

Hrs: M-F 9am to 5pm EST

CAUTIONS

CAUTION – RISK OF SHOCK:

Disconnect Power at the main circuit breaker panel or main fusebox before

starting and during the installation.

WARNING:

1. This fixture is intended for installation in accordance with the National

Electrical Code (NEC) and all local code specifications. If you are not familiar

with code requirements, installation by a certified electrician is recommended.

Failure to adhere to these codes and instructions may result in serious injury

and/or property damage and will void the warranty.

CLEANING:

• Always be certain that electric current is turned o before cleaning.

• Only a soft damp cloth should be used. Harsh cleaning products may damage

the finish.

INSTALLATION INSTRUCTIONSFIXTURE DIAGRAM

IS-59129-US

PARTS LIST

[A] Upper Frame

[B] Lower Frame

[C] Countersunk Screw (4)

[D] Fixture Base

[E] Mounting Screw (3)

1. Remove the four (4) countersunk screws from the top of upper frame (two on each side of [C][A]

fixture). Retain countersunk screws. Carefully remove upper frame[A] from lower frame[B].

2. Carefully slip fixture base onto post. Using the fixture base as a template, mark the positions for [D]

the three (3) mounting screw holes on the post.

NOTE: Ensure that fixture is facing the desired direction for final installation.

3. Remove fixture base from post.

4. Drill 3/16” (4.76mm) holes in post at the positions that were marked in Step 2.

5. Grounding instructions: (See Illus. a or b).

If fixture is provided with ground wire, connect fixture ground wire to outlet box ground wire with

wire connector after following the above steps. Never connect ground wire to black or white power

supply wires.

6. Make wire connections. Reference chart below for correct connections and wire accordingly.

Connect Black or Red

Supply Wire to:

Connect White Supply

Wire to:

BlackWhite

*Parallel cord (round &

smooth)

*Parallel cord (square &

ridged)

Clear, Brown, Gold or Black

without Tracer

Clear, Brown, Gold or Black

with Tracer

Insulated wire (other

than green) with copper

conductor

Insulated wire (other

than green) with silver

conductor

*Note: When parallel wire (SPT

1 & SPT 2) are used. The neutral

wire is square shaped or ridged

and the other wire will be round

in shape or smooth (See illus.)Neutral Wire

7. Carefully slip fixture base onto post and secure in place using three (3) mounting screws. [D][E]

Screws should slip into holes drilled in post.

8. Insert recommended bulbs (not included).

9. Carefully place upper frame on top of lower frame. Align the four (4) holes in the top of the [A][B]

lower frame with the four (4) holes in the upper frame (two on each side of fixture).

10. into aligned holes and tighten to secure upper frame to lower Screw countersunk screws[C]

frame.

GREEN GROUND

SCREW

CUPPED

WASHER

OUTLETBOX

GROUND

FIXTURE

GROUND

DIMPLES

WIRE CONNECTOR

OUTLETBOX

GROUND

GREEN GROUND

SCREW

FIXTURE

GROUND

a

b

© 2023 Kichler Lighting LLC. All rights reserved.

E

D

B

A

C

Product specificaties