Kichler Joelson 43922NI Handleiding

Bekijk gratis de handleiding van Kichler Joelson 43922NI (2 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.6 sterren uit 5 reviews. Heb je een vraag over Kichler Joelson 43922NI of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Date Issued: 04/18/16IS-43922-CB

INSTRUCTIONS

For Assembling and Installing Fixtures in Canada

Pour L’assemblage et L’installation Au Canada

SEE OTHER SIDE FOR CANADIAN FRENCH TRANS-

LATIONS.

VOIR L’AUTRE CÔTÉ POUR LES CANADIENS TRA-

DUCTIONS EN FRANÇAIS.

We’re here to help 866-558-5706

Hrs: M-F 9am to 5pm EST

OUTLET BOX

BOÎTE DE SORTIE

WIRE CONNECTOR(S)

CONNECTEURS

DE FIL(S)

STRAP

MOUNTING SCREW(S)

SANGLE VIS

DE MONTAGE

MOUNTING STRAP

SANGLE DE FIXATION

MOUNTING SCREW

VIS DE FIXATION

HEXNUT

ÉCROU

HEXAGONAL

LOCKWASHER(S)

RONDELLE FREIN(S)

LOCK-UP KNOB(S)

BOUTON BLOCAGE(S)

SWIVEL

PIVOTANT

SMALL

THREADED NIPPLE

PETIT

RACCORD FILETÉ

E

D

BODY TUBE

TUBE

DU CORPS

GLASS

VERRE

GLASS RETAINER

RETENUE DE VERRE

1) Pass fixture wire thru Body Tube. Thread tube onto threaded

nipple on bottom of fixture and tighten to secure.

2) Pass fixture wire and ground wire thru desired amount of

stems D & E and thread together using supplied nipples.

NOTE: Use a drop of Thread compound (supplied) on the

threads.

3) Thread Swivel onto stems securely. Pass threaded Swivel,

wire, ground wire thru hole in canopy. Place lockwasher

onto end of threaded nipple protruding from inside canopy.

Thread hexnut onto threaded nipple protruding from inside

canopy. Tighten to secure Swivel.

4) Rotate the arms into the correct location as shown.

5) TURN OFF POWER.

a) IMPORTANT: Before you start, NEVER attempt any work

without shutting off the electricity until the work is done.

b) Go to the main fuse, or circuit breaker, box in your

home. Place the main power switch in the “OFF”

position.

c) Unscrew the fuse(s), or switch “OFF” the circuit breaker

switch(s), that control the power to the fixture or room

that you are working on.

d) Place the wall switch in the “OFF” position. If the fixture

to be replaced has a switch or pull chain, place those in

the “OFF” position.

6) Find the appropriate threaded holes on mounting strap. As-

semble mounting screws into threaded holes.

7) Attach mounting strap to outlet box. Mounting strap can be

adjusted to suit position of fixture.

8) Make wire connections. Reference chart below for correct

connections and wire accordingly.

9) Push fixture to ceiling, carefully passing mounting screws

through holes in canopy. Make sure all wires are inside

canopy and do not get pinched between canopy and ceiling.

10) Thread lockup knobs onto mounting screw and tighten to

secure fixture to ceiling.

11) Place glass over socket and take the glass retainer and

thread onto the socket to secure glass in place..

12) Screw light bulb (not supplied) in place.

13) Installation is now complete.

Connect Black or

Red Supply Wire to:

Connect

White Supply Wire to:

BlackWhite

*Parallel cord (round & smooth)*Parallel cord (square & ridged)

Clear, Brown, Gold or Black

without tracer

Clear, Brown, Gold or Black

with tracer

Insulated wire (other than green)

with copper conductor

Insulated wire (other than green)

with silver conductor

*Note: When parallel wires (SPT I & SPT II)

are used. The neutral wire is square shaped

or ridged and the other wire will be round in

shape or smooth (see illus.)

Neutral Wire

Product specificaties