Kenwood JKP350 series Handleiding

Kenwood Waterkoker JKP350 series

Lees hieronder de 📖 handleiding in het Nederlandse voor Kenwood JKP350 series (64 pagina's) in de categorie Waterkoker. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/64
English 2 - 4
Nederlands 5 - 7
Français 8 - 10
Deutsch 11 - 13
Italiano 14 - 16
Português 17 - 19
Español 20 - 22
Dansk 23 - 25
Svenska 26 - 28
Norsk 29 - 31
Suomi 32 - 34
Türkçe 35 - 37
Ïesky 38 - 40
Magyar 41 - 43
Polski 44 - 47
Русский 48 - 51
Ekkgmij 52 - 55
Slovenčina 56 - 58
Українська 59 - 61
´¸∂w
26 - 46
HEAD OFFICE: Kenwood Limited, 1-3 Kenwood Business Park, New Lane, Havant, Hampshire PO9 2NH
40790/1
max
4
3
2
1
max
6
5
4
3
2
1
instructions
istruzioni
instrucciones
Bedienungsanleitungen
gebruiksaanwijzing
JKP300 series JKP310 series
JKP350 series
before using your Kenwood
appliance
●Read these instructions carefully and
retain for future reference.
●Remove all packaging and any
labels.
safety
●Always use the filter and never
overfill - boiling water may splash
out.
●Avoid contact with steam coming
out of the spout area when pouring
and out of the lid or spout area
when refilling.
●Never let the cord hang down where
a child could grab it.
●Always unplug your kettle
when not in use.
●Never put the kettle, powerbase,
cord or plug in liquid.
●Never use a damaged appliance.
Get it checked or repaired: see
‘service and customer care’.
●Caution: Do not operate the kettle
on an inclined surface.
●Only use the powerbase supplied
and keep it clean and dry.
●Make sure the lid is secure before
switching the kettle on.
●Warning: Do not open the lid while
the water is boiling.
●Take care when opening the lid -
droplets of hot water may be
ejected.
●Make sure the kettle is switched off
before lifting or pouring.
●Remove the kettle from the base
before filling or pouring.
●Never put the kettle near or on
cooker hot plates or gas burners.
●This kettle is for boiling water only.
●This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
●Children should be supervised to
ensure that they do not play with the
appliance.
●Only use the appliance for its intended
domestic use. Kenwood will not accept
any liability if the appliance is subject to
improper use, or failure to comply with
these instructions.
before plugging in
●Make sure your electricity supply is
the same as the one shown on the
underside of your kettle.
●This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using for the first time
1 Wrap any excess cord around the
bracket on the underside of the
powerbase 햷.
2 Fill to ‘MAX’, boil, then pour the
water away. Repeat 2 to 3 times.
key
햲finger pad
햳flip top lid
햴lid release button
햵on/off switch with indicator light
햶360° powerbase
햷cord wrap
햸water level windows
햹filter
to use your kettle
1 Fill the kettle through either the
spout or lid. To open the lid, press
the lid release button 햴. The water
level must be between ‘MAX’ and 1
cup (250mls).
●Be economical: do not boil more
water than you need.
●To improve the quality of your drinks
always use fresh water.
●Empty the kettle after each use.
2 Close the lid by pushing down on
the finger pad area .
English
2
max
6
5
4
3
2
1
6
5
4
3
2
1
max
6
5
4
3
2
max
6
5
4
3
2
1
max
6
5
4
3
2
햹
햸
햲
햳
햴
햶
햵
햷
3Plug in and switch on. The indicator
light will come on.
4Your kettle will boil and switch off
automatically. To re-boil, wait a few
seconds - the on/off switch needs
time to reset.
Note - To interrupt the boiling
ensure that the switch is in
the off position before
removing from the power
base.
●If you experience problems
with your kettle switching on
and off during use or
switching off before boiling,
check that the flat element is
free from scale - see
“descaling”.
●Your kettle is fitted with a filter to
hold back limescale particles.
●If you find drops of water under your
kettle, don’t worry - it is just
condensation.
boil-dry protection
●If you switch on with too little water,
your kettle will cut out automatically.
Switch off, remove from the
powerbase and let it cool down
before re-filling. When it has cooled
down, the switch will reset itself.
care and cleaning
●Before cleaning, unplug your kettle
and let it cool down.
the outside and powerbase
●Wipe with a damp cloth, then dry.
Do not use abrasives - they will
scratch the metal and plastic
surfaces.
the inside
●Even though your kettle comes with
a filter, you still need to clean the
inside (and the filter) regularly.
the filter
1 Open the lid. Press the lid release
button .
2 Remove the filter by holding the tab
and then lifting the filter out.
3either rinse under the tap or use a
soft brush.
or when descaling your kettle, drop
the filter in too. Rinse thoroughly.
4Replace the filter by locating the
front of the filter into the spout area
and then clip into place .
descaling
●Regular descaling of the flat element
will improve the performance of your
kettle. If the kettle is not descaled
regularly the build up of limescale
may result in the following:
●problems may be experienced
with the kettle switching on and
off during use or switching off
before boiling.
●the kettle may take longer to boil.
●the flat element may be damaged.
Please note: Failure to descale your
kettle may invalidate your guarantee.
●When limescale starts to build up on
the heating element, buy a suitable
descaler and descale your kettle.
After descaling, boil with fresh water
several times and discard. Clean any
descaler off the kettle - it can
damage the parts.
●Some regions of the country have
chalky water. This makes boiled
water look cloudy and leaves a
deposit on the side of the kettle. This
is normal but can be removed with
regular cleaning.
●Alternatively, to reduce limescale
build up, use filtered water to fill your
kettle.
service and customer
care
●If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
●using your appliance or
●servicing or repairs
●Contact the shop where you bought
your appliance.
●Designed and engineered by
Kenwood in the UK.
●Made in China.
3

Product specificaties

Merk: Kenwood
Categorie: Waterkoker
Model: JKP350 series

Heb je hulp nodig?

Als je hulp nodig hebt met Kenwood JKP350 series stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Waterkoker Kenwood

Kenwood

Kenwood ZJM810 Handleiding

3 Juni 2023
Kenwood

Kenwood SJM290 Handleiding

11 Mei 2023
Kenwood

Kenwood SJM100 Handleiding

10 Mei 2023
Kenwood

Kenwood SJM250 Handleiding

6 Mei 2023
Kenwood

Kenwood kMix SKM031 Handleiding

3 Mei 2023
Kenwood

Kenwood SJM560 Handleiding

29 April 2023
Kenwood

Kenwood JKP230 Handleiding

29 April 2023
Kenwood

Kenwood SJM550 Handleiding

26 April 2023
Kenwood

Kenwood ZJM811 Handleiding

20 April 2023
Kenwood

Kenwood ZJM400 Handleiding

6 April 2023

Handleiding Waterkoker

Nieuwste handleidingen voor Waterkoker

Graef

Graef WK600 Handleiding

10 April 2024
KitchenAid

KitchenAid Artisan Electric Kettle Handleiding

9 April 2024
Tefal

Tefal Delfini KO1511 Handleiding

8 April 2024
Scarlett

Scarlett SC-EK27G11 Handleiding

8 April 2024
Brentwood

Brentwood KT-1900R Handleiding

3 April 2024
Brentwood

Brentwood KT-1962W Handleiding

3 April 2024
Brentwood

Brentwood KT-1710S Handleiding

3 April 2024
Brentwood

Brentwood KT-32W Handleiding

3 April 2024
Brentwood

Brentwood KT-1508W Handleiding

3 April 2024
Brentwood

Brentwood KT-1780 Handleiding

3 April 2024