KanexPro EXT-HDBTKVM100 Handleiding

KanexPro AV extender EXT-HDBTKVM100

Lees hieronder de 📖 handleiding in het Nederlandse voor KanexPro EXT-HDBTKVM100 (14 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14

EXT- HDBTKVM100

4K HDBaseT 2.0 ™ Extender w/ HDMI® & USB 2.0

KVM support

Extend HDMI, USB 2.0, and RS-232 & Power over HDBaseT

up to 150 meters (492 feet)

Version: EXT- _ 6V1.0HDBTKVM100 201

HDBaseT 2.0 KVM Extender Set

Preface

Read this user manual carefully before using this product. Pictures shown in this manual

is for reference only, different model and specifications are subject to real product.

This manual is only for operation instruction only, not for any maintenance usage. The

functions described in this version are updated till . Any changes of February 2016

functions and parameters since then will be informed separately. Please refer to the

dealers for the latest details.

All product function is valid till 2-26- .2016

Trademarks

Product model and logo are trademarks. Any other trademarks mentioned in this

manual are acknowledged as the properties of the trademark owner. No part of this

publication may be copied or reproduced without prior written consent.

FCC Statement

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. It has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a commercial

installation.

Operation of this equipment in a residential area is likely to cause interference, in which

case the user at their own expense will be required to take whatever measures may be

necessary to correct the interference

Any changes or modifications not expressly approved by the manufacture would void

the user’s authority to operate the equipment.

HDBaseT 2.0 KVM Extender Set

SAFETY PRECA UTIONS

To insure the best from the product, please read all instructions carefully before using

the device. Save this manual for further reference.

! Unpack the equipment carefully and save the original box and packing material for

possible future shipment

! Follow basic safety precautions to reduce the risk of fire, electrical shock and injury

to persons.

! Do not dismantle the housing or modify the module. It may result in electrical shock

or burn.

! Using supplies or parts not meeting the products’ specifications may cause damage,

deterioration or malfunction.

! Refer all servicing to qualified service personnel.

! To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this

product near water.

! Do not put any heavy items on the extension cable in case of extrusion.

! Do not remove the housing of the device as opening or removing housing may

expose you to dangerous voltage or other hazards.

! Install the device in a place with fine ventilation to avoid damage caused by

overheat.

! Keep the module away from liquids.

! Spillage into the housing may result in fire, electrical shock, or equipment damage. If

an object or liquid falls or spills on to the housing, unplug the module immediately.

! Do not twist or pull by force ends of the optical cable. It can cause malfunction.

! Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to

the device before cleaning.

! Unplug the power cord when left unused for a long period of time.

! Information on disposal for scrapped devices: do not burn or mix with general

household waste, please treat them as normal electrical wastes.

Product specificaties

Merk:	KanexPro
Categorie:	AV extender
Model:	EXT-HDBTKVM100
Kleur van het product:	Zwart
Soort:	AV-zender & ontvanger
USB-connectortype:	USB Type-A, USB Type-B
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Maximum resolutie:	4096 x 2160 Pixels
Aantal USB-aansluitingen:	3
HDCP:	Ja
3D:	Ja
HDMI versie:	2.0
Output current:	2 A
HDMI in:	1
RJ-45 uitgang ports:	1
Aantal HDMI-uitgangen:	1
Receiver afmetingen (B x D x H):	116 x 95 x 22 mm
RJ-45 invoer ports:	1
Maximaal bereik:	150 m
AC-ingangsspanning:	100 - 240 V
Bedrijfstemperatuur (T-T):	-20 - 65 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
Receiver gewicht:	800 g
Transmitter afmetingen (WxDxH):	116 x 95 x 22 mm
Transmitter gewicht:	800 g
Stroomverbruik (zender) (max):	5.7 W
Ondersteundende kabel types:	Cat5e, Cat6
Extended display identification data (EDID):	Ja
Stroomverbruik (ontvanger) (max):	8 W
Bidirectioneel:	Ja
EDID-management:	Ja