KanexPro AUD-DTE-LINEOUT Handleiding

Bekijk gratis de handleiding van KanexPro AUD-DTE-LINEOUT (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen. Heb je een vraag over KanexPro AUD-DTE-LINEOUT of wil je andere gebruikers van dit product iets vragen? Stel een vraag

AUD-DTE-LINEOUT

Product Manual

Dante® 2-Channel Line Output Adapter

The KanexPro AUD-DTE-LINEOUT is a compact 2-channel Dante line output adapter built on the Dante Ultimo 2x2 platform. It

converts Dante digital audio to two channels of balanced or unbalanced analog audio through 6-pin phoenix connectors. Five discrete

gain levels match professional and consumer reference standards. Dual power via PoE (802.3af) or USB-C. Managed via Dante

Controller.

Surge Protection Recommended — This product contains sensitive electrical components that may be damaged by electrical spikes,

surges, electric shock, or lightning strikes. Use of surge protection systems is highly recommended.

Caution — The network cable connection method required for this product is direct connection. Please do not cross connect.

TABLE OF CONTENTS

1. Features1

2. Package Contents1

3. Specifications2

4. Operation Controls3

5. Wiring Configuration3

6. Application Example4

7. Troubleshooting4

FEATURES

PACKAGE CONTENTS

1× Dante 2CH Line Output Adapter • 1× 6-pin 3.5mm Phoenix Connector (male) • 2× Hook & Loop • 1× User Manual

Dante 2CH digital audio to two-channel balanced/unbalanced analog audio output

Built on the Dante Ultimo 2x2 platform for full Dante ecosystem interoperability

Supports 44.1/48/88.2/96kHz sampling rates at 24-bit resolution

5-level discrete gain adjustment (+18dBu, +4dBu, 0dBu, 0dBV, -10dBV)

Balanced output: +18dBu (6.15Vrms) max / Unbalanced: +12dBu (3.08Vrms) max

Studio-grade audio: >100dB S/N ratio, <0.01% THD+N, >100dB dynamic range

Flat frequency response: 20Hz–20kHz (±0.5dB)

Configurable Dante device latency: 1, 2, or 5ms via Dante Controller

Dual power: PoE (IEEE 802.3af Class 0) and USB-C (5V/500mA)

6-pin 3.5mm phoenix connector output for permanent installation wiring

100M network bandwidth, up to 328ft/100m over CAT6/6A/7

Compact form factor (115×40×28mm, 94g) with hook & loop mounting

ESD protection: IEC 61000-4-2 (±8kV air / ±4kV contact)

Scan for product page

kanexpro.com/item/AUD-DTE-LINEOUT

888.975.1368 | [email protected] | kanexpro.com1 / 4

Product specificaties