KanexPro AUD-DTE-HDMI Handleiding

Bekijk gratis de handleiding van KanexPro AUD-DTE-HDMI (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.8 sterren uit 6 reviews. Heb je een vraag over KanexPro AUD-DTE-HDMI of wil je andere gebruikers van dit product iets vragen? Stel een vraag

AUD-DTE-HDMI

Product Manual

Dante® 2CH HDMI™ Input Adapter

Thank you for purchasing the KanexPro AUD-DTE-HDMI. Please read these instructions

carefully before connecting, operating, or adjusting this product. Keep this manual for future

reference.

Surge Protection Recommended: This product contains sensitive electronic components.

Use of surge protection is strongly recommended to protect and extend the life of your

equipment.

MPN: AUD-DTE-HDMI

1. Introduction1

2. Features1

3. Package Contents1

4. Specifications2

5. Operation Controls & Functions3

6. API Commands3

7. Application Example4

1. INTRODUCTION

The KanexPro AUD-DTE-HDMI is an audio transmitter built on the Dante® Ultimo 2×2 platform. It converts two-channel PCM audio

embedded in an HDMI™ signal into Dante® 2CH digital audio and transmits it across the network with lossless fidelity. The adapter

supports audio sampling rate conversion and maintains a pure digital signal path with no analog conversion stages or signal loss.

Powered via USB-C or PoE, the compact device is plug-and-play and suitable for recording studios, live events, conference rooms,

classrooms, broadcast facilities, and houses of worship.

2. FEATURES

3. PACKAGE CONTENTS

① 1× Dante® 2CH HDMI™ Input Adapter  2× Hook & Loop  1× User Manual②③

Scan for product page

kanexpro.com/item/AUD-DTE-HDMI

888.975.1368 | [email protected] | kanexpro.com

1 / 4

Converts 2-channel PCM HDMI™ audio to Dante® 2CH digital audio with no analog conversion stage

HDMI™ audio input supports PCM 2CH 32kHz–192kHz @ 24-bit; HDMI 2.0b / HDCP 2.3 compliant

Dante® output supports 44.1, 48, 88.2, and 96kHz @ 24-bit for broad pro-audio compatibility

Configurable Dante® device latency: 1, 2, or 5ms via Dante® Controller

AES67 supported — interoperates with third-party Dante/AES67 devices across any vendor ecosystem

Dual power: PoE (IEEE 802.3af Class0) or USB-C 5V/500mA — no external PSU required

Signal-to-noise ratio >130dB; THD+N <0.01%; audio output delay <1ms

USB-C port serves as power input, MCU firmware update port, and API command/EDID control port

Product specificaties