KanexPro AUD-DTE-BT Handleiding

Bekijk gratis de handleiding van KanexPro AUD-DTE-BT (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen. Heb je een vraag over KanexPro AUD-DTE-BT of wil je andere gebruikers van dit product iets vragen? Stel een vraag

AUD-DTE-BT

PRODUCT MANUAL

Dante® Bluetooth Audio Input Adapter with APTX-LL & APTX-HD

Stream Any Bluetooth 5.1 Device into Your Dante® Network — No Analog Stage

Dante® networks are wired by design — but the presenters, performers, and guests in your spaces aren’t. The KanexPro AUD-DTE-BT

bridges that gap without compromise: Bluetooth 5.1 audio from any smartphone, tablet, or laptop streams directly onto your Dante® network

as clean 2-channel PCM digital audio, with no analog conversion stage, no extra adapters, and no signal degradation between source and

destination.

Built on the Dante® Ultimo 2×2 platform, the AUD-DTE-BT is a fully managed Dante device — discoverable and configurable via Dante®

Controller with selectable latency of 1, 2, or 5ms. A single RJ45 connection handles both Dante audio output and PoE power from any

standard 802.3af switch, with USB-C as a backup power option for installations without PoE infrastructure.

Surge Protection Recommended: This product contains sensitive electrical components. Use of surge protection systems is highly

recommended to protect and extend the life of your equipment.

Network Cable: This product requires direct (straight-through) CAT cable connection. Do not use crossover cables.

Table of Contents

1. Introduction1

2. Features1

3. Package Contents1

4. Specifications2

5. Operation Controls and Functions3

6. API Commands3

7. Application Example4

1. Introduction

The Dante® 2CH Bluetooth Input Adapter is an audio transmitter based on the Dante® Ultimo 2×2 platform. It converts two-channel

Bluetooth audio into Dante® 2CH digital audio and transmits the audio to the receiving end through the network (Dante®). The adapter

supports local USB-C port power supply and PoE function.

2. Features

3. Package Contents

Two-channel Bluetooth audio to Dante® 2CH digital audio☆

Supports Bluetooth V5.1, SBC / AAC / APTX / APTX-LL / APTX-HD, up to 192kHz@24-bit☆

Dante® audio sampling rate supports 48kHz@24-bit☆

Dante® audio delay supports 1/2/5ms (configurable via Dante® Controller)☆

Supports local USB-C port power supply and PoE function (Class0 IEEE802.3af)☆

Compact design for easy and flexible installation☆

1× Dante® 2CH Bluetooth Input Adapter

①

2× Hook & Loop

①

1× User Manual

①

Scan for product page

kanexpro.com/item/AUD-DTE-BT

888.975.1368 | [email protected] | kanexpro.com1 / 4

Product specificaties