Jung CD5544.03V Handleiding

Jung Dimmer CD5544.03V

Lees hieronder de 📖 handleiding in het Nederlandse voor Jung CD5544.03V (4 pagina's) in de categorie Dimmer. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Light management

Light managementLight management

Rotary dimmer LED with rotary on/off

Rotary dimmer LED with rotary on/offRotary dimmer LED with rotary on/off

Art. no.: ..5544.03..

Operating instructions

Operating instructionsOperating instructions

11 Safety instructions

Safety instructions

Safety instructionsSafety instructions

Electrical devices may only be mounted and connected by electrically skilled persons.

Electrical devices may only be mounted and connected by electrically skilled persons.Electrical devices may only be mounted and connected by electrically skilled persons.

Serious injuries, fire or property damage possible. Please read and follow manual fully.

Serious injuries, fire or property damage possible. Please read and follow manual fully.Serious injuries, fire or property damage possible. Please read and follow manual fully.

Danger of electric shock. Always disconnect before carrying out work on the devise or load. In

Danger of electric shock. Always disconnect before carrying out work on the devise or load. InDanger of electric shock. Always disconnect before carrying out work on the devise or load. In

so doing, take all the circuit breakers into account, which support dangerous voltages to the

so doing, take all the circuit breakers into account, which support dangerous voltages to theso doing, take all the circuit breakers into account, which support dangerous voltages to the

device and or load.

device and or load.device and or load.

Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load

Danger of electric shock. Device is not suitable for disconnection from supply voltage. The loadDanger of electric shock. Device is not suitable for disconnection from supply voltage. The load

is not electrically isolated from the mains even when the device is switched off.

is not electrically isolated from the mains even when the device is switched off.is not electrically isolated from the mains even when the device is switched off.

These instructions are an integral part of the product, and must remain with the end customer.

These instructions are an integral part of the product, and must remain with the end customer.These instructions are an integral part of the product, and must remain with the end customer.

22 Device components

Device components

Device componentsDevice components

Figure1: Device components

(1) Dimmer

(2) Cover

(3) Control button

(4) Fuse holder

(5) Screw terminals

33 Function

Function

Function Function

Intended use

Intended useIntended use

– Switching and dimming incandescent lamps, HV halogen lamps and dimmable leading

edge phase control HV-LED lamps

– Mounting in appliance box according to DIN 49073

– Operation with suitable cover

No operation with changeover switch possible.

No operation with transformers possible.

1 / 4

32513333 13.02.2019

J0082513333

Light management

Light managementLight management

Rotary dimmer LED with rotary on/off

Product characteristics

Product characteristicsProduct characteristics

– Leading edge phase control dimming principle

– Short-circuit protection through fine-wire fuse

Flickering of the connected lamps due to undershoot of the specified minimum load or

through centralised pulses from the power stations and soft humming of the device due to

the radio interference suppressor. These are not device faults.

44 Operation

Operation

OperationOperation

Switching and dimming are performed by turning the control button.

Switching the light on and increasing the brightness

Switching the light on and increasing the brightnessSwitching the light on and increasing the brightness

￭ Turn control button to the right.

Switching the light off

Switching the light offSwitching the light off

￭ Turn control button all the way to the left.

55 Information for electrically skilled persons

Information for electrically skilled persons

Information for electrically skilled personsInformation for electrically skilled persons

DANGER!

Mortal danger of electric shock.

Mortal danger of electric shock.Mortal danger of electric shock.

Disconnect the device. Cover up live parts.

Disconnect the device. Cover up live parts.Disconnect the device. Cover up live parts.

Connecting and mounting the dimmer

Connecting and mounting the dimmerConnecting and mounting the dimmer

Connect max. 300W LED lamps per 16A circuit breaker.

Our dimmers take into account the different electronic characteristics of most LED lamps

found on the market. However, it cannot be guaranteed that in individual cases the de-

sired results may not be achieved.

Figure2: Connection diagram

￭ Connect the dimmer (1) according to the connection diagram (Figure 2).

Figure3: Clampable conductor cross-section

2 / 4

32513333 13.02.2019

J0082513333

Light management

Light managementLight management

Rotary dimmer LED with rotary on/off

￭ Mount the dimmer in the appliance box. Terminals must be at the bottom.

￭ Mount the cover (2).

￭ Attach the control button (3).

￭ Switch on mains voltage.

66 Technical data

Technical data

Technical dataTechnical data

Rated voltage AC 230 V~

Mains frequency 50 Hz

Standby power approx. 0.2 W

Power loss approx. 3.7 W

Ambient temperature -5 ... +45 °C

Connected load at 25°C

Incandescent lamps 20 ... 200 W

HV halogen lamps 20 ... 200 W

HV-LED lamps typ. 3 ... 40 W

Mixed load

Ohmic and HV LED typ. 3 ... 40 W

Power reduction

when surface mounting -5%

per 5°C in excess of 25°C -10%

when installed in wooden or dry construction walls -15%

when installed in multiple combinations -20%

Fine-wire fuse T800mA H250

77 Troubleshooting

Troubleshooting

TroubleshootingTroubleshooting

The device cannot be switched on. Or: The device switches the load off and cannot be switched

The device cannot be switched on. Or: The device switches the load off and cannot be switchedThe device cannot be switched on. Or: The device switches the load off and cannot be switched

on again.

on again.on again.

Check fine-wire fuse and replace if necessary. Use only original fuses.

Connected HV-LED lamps flicker

Connected HV-LED lamps flickerConnected HV-LED lamps flicker

Cause: The lamps are not dimmable or dimming principle and lamps do not optimally match.

Check manufacturer's instructions. Exchange lamps for another type.

Connected HV-LED lamps switch off in the lowest dimming position or flicker

Connected HV-LED lamps switch off in the lowest dimming position or flickerConnected HV-LED lamps switch off in the lowest dimming position or flicker

Cause: Brightness is set too low for the lamps.

Adjust the brightness and set it brighter.

LED lamp is dimly lit when dimmer is switched off