Juice Goose RX30 Handleiding

Bekijk gratis de handleiding van Juice Goose RX30 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 7 mensen en kreeg gemiddeld 4.4 sterren uit 9 reviews. Heb je een vraag over Juice Goose RX30 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

RX 30

F I L T E R C O R D

TM

Ground Line Protection

Juice Goose RX Series power protection technology is

particularly valuable because it works against ground

line (common mode) as well as hot to neutral (normal

mode) events. While ground line surges and distur-

bances don’t typically cause catastrophic damage, they

can result in operating failures and improper perform-

ance of digital processing equipment.

Compared with the low operating voltage of processor

logic, a power anomaly of even 1 or 2 volts on data

lines or logic ground can cause problems. That’s why

the RX Series products limit ground line voltage surges

to only 1/2 volt.

RX Series products also protect against more dramatic

events. Connected equipment is safe from surges up to

6,000 volts at 3,000 amps on hot, neutral and ground.

The RX Series design includes a differential transformer,

lots of filtering capacitance and surge diverting compo-

nents. Control circuitry provides protection from external

wiring faults including hot-neutral reversal, missing

ground and over voltage. RX technology delivers per-

formance enhancement and protection comparable to

an isolation transformer – but at a fraction of the price

and in a fraction of the space.

Video Performance

Improve performance of HD monitors and projectors

while protecting your valuable investment. When high

frequency interference reaches your HD image through

the power cord, image quality is lost along with much of

the reason for going HD in the first place. At the same

time, dangerous high energy events you may or may not

notice can shorten the life of your video machine.

Convenience

The Juice Goose RX 30 is built into the middle of a

power cord (“Filtercord”) to provide a convenient, easy

to install package for use with non racked equipment

such as digital signage monitors, media players and pro-

jectors. It can also be used as added protection for a

rack mounted power strip. The RX 30 features a three

foot power source cable with a right angle plug to lie flat

against a wall.

The power outlet side of the RX 30 includes three re-

ceptacles placed 90 degrees from each other to accom-

modate multiple components including AC adapters.

This design allows for better filter module placement and

connection with hard to reach AC outlets.

Product specificaties