JPL Element TT3-AVANT-B Handleiding

Bekijk gratis de handleiding van JPL Element TT3-AVANT-B (3 pagina’s), behorend tot de categorie Headset. Deze gids werd als nuttig beoordeeld door 96 mensen en kreeg gemiddeld 4.6 sterren uit 8 reviews. Heb je een vraag over JPL Element TT3-AVANT-B of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Headset User Guide

Warranty

Your TT3 headset has been carefully manufactured

and 100% tested using high quality assured

components. It is protected by warranty against

faulty workmanship and materials for a period of

24 months from the date of purchase. In the unlikely

event that a failure should occur, the unit will be

repaired or replaced free of charge when returned

postage paid to the address below, within the

24 month warranty.

This warranty does not cover damage or failure

resulting from misuse. Failure to comply with the

warnings, care and safety advice listed in this user

guide will void the warranty. This warranty does

not cover goods damaged in transit. Removing the

warranty tab thread on the headset cable will also

void warranty. Your statutory rights are in no way

aected by this warranty.

For service in or out of warranty please return the

unit postage paid to:

JPL Limited, Unit 1, Church Close Business Park,

Church Close, Todber, Sturminster Newton,

Dorset, DT10 1JH, ENGLAND.

When returning your unit please ensure that the

package contains a covering letter stating when and

where you purchased the unit and a description of

the problem encountered. If the unit is within the

warranty period please enclose proof of purchase.

Repair or replacement is at the discretion of the

manufacturer. In accordance with its policy of

progressive design, JPL reserves the right to alter

product specications at any time, without prior

notice.

Limited Warranty

Consequential and incidental damages, including

without limitation, loss of property and those arising

from breach of any express or implied warranty, are

not the responsibility of the retailer and to the extent

permitted by law, are excluded.

JPL Limited, Unit 1, Church Close Business Park,

Church Close, Todber, Sturminster Newton,

Dorset, DT10 1JH, ENGLAND.

Telephone: +44 (0)1258 820100

www.jpltele.com

79 108

Adjusting the Microphone Boom

To avoid low or distorted sound, and to provide

clear and crisp telephone calls, the microphone

should be positioned within 30-40mm of your

mouth (2 ngers width). The microphone boom

arm will move in a variety of directions to ensure

the best t. See g.5.

30 - 40mm

from mouth

(2 ngers width)

Adjusting the Headband

Place the headset receiver to your ear(s),

if using a single ear headset you should set

the T-bar above your other ear. Adjust the

headband until it is comfortable, ideally

ensuring there is virtually no pressure felt on

the ear(s).

Most headsets can be worn on either side.

To change the microphone side, simply rotate

the microphone boom 180° to the other

side. The microphone boom will not rotate a

complete 360°. See g.3.

Microphone

housing -

120° rotation

Microphone boom

- 280° rotation

The microphone housing/ear cushion can

rotate 120° to enable individual comfort on

ear(s). See g.4.

Removing the Microphone Boom

To remove the microphone boom from the

headband, carefully and gently push inside the

ear cushion on the speaker material for approx.

3mm - 5mm. The microphone housing will

then come away easily. See g.8a & 8b.

DO NOT pull on the

microphone boom

to remove it from the

headband.

14/04/005.V2

NOTE:

Disconnect the Quick Disconnect cable, See g.7,

before separating the microphone boom from

the monaural/binaural headand.

g.7

g.3

g.4

g.5

g.8a

g.8b

To adjust the microphone boom to the shape of

your face, hold the boom arm as shown in g. 6.

Do not hold the microphone end to shape boom.

g.6

Designed and Engineered in the UK

Assembled in China

Product specificaties