Joy-it SEN-HX711-05 Handleiding


Bekijk gratis de handleiding van Joy-it SEN-HX711-05 (7 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 27 mensen en kreeg gemiddeld 5.0 sterren uit 14 reviews. Heb je een vraag over Joy-it SEN-HX711-05 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/7
LOAD CELL
SEN-HX711
1. GENERAL INFORMATION
Dear customer,
thank you very much for choosing our product.
In following, we will introduce you to what to observe while starting up
and using this product.
Should you encounter any unexpected problems during use, please do
not hesitate to contact us.
For accurate measurements it is important to mount the load cell cor-
rectly.
The cell must be bolted into a solid base plate with the Integrated holes
on one side and the other side bolted to the bearing surface of your mea-
suring point.
Example setup:
2. INSTALLATION OF THE LOAD CELL
3. USE WITH THE ARDUINO
3.1 Wiring
3.2 Installation
To use the load cell, you must install a library. To do this, open your
Arduino IDE and click on:
Tools Manage libraries->
Now enter HX711 Arduino Library in the search field and install the library
HX711 Arduino Library by Bogdan Necula, Andreas Motl.
Arduino Amplifier board Load cell
5 V VCC -
GND GND -
Pin 3 SCK -
Pin 2 DT -
E+ Red
- E Black
- A Green
A+ White


Product specificaties

Merk: Joy-it
Categorie: Niet gecategoriseerd
Model: SEN-HX711-05

Heb je hulp nodig?

Als je hulp nodig hebt met Joy-it SEN-HX711-05 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden