Joy-it RB-STROMPI2 Handleiding

Joy-it Niet gecategoriseerd RB-STROMPI2

Lees hieronder de 📖 handleiding in het Nederlandse voor Joy-it RB-STROMPI2 (9 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9

STROM PI 2

Power Solution

1. GENERAL INFORMATION

Dear customer,

thank you for choosing our product. In the following, we will show what

you should note at the commissioning and during the usage.

Should you encounter any unexpected problems during use, please do not

hesitate to contact us.

The StromPi 2 expansionboard is the new development of the Joy-IT power

solution. Not only, the voltage range is increased from 6 to 61 V to connect

for example bigger / more batteries or power supplies.

Therefore, the StromPi 2 board provides now up to 3 A current to supply

greater projects with enough power. Moerover, the reset-function for the

Raspberry Pi is now integrated which extends the USV-function of the

StromPi practically.

Through the new super-at construction and connection, the StromPi 2 ts

in many cases and new application areas. The StromPi 2 allows to connect

your Raspberry Pi with an arbitary voltage source with a voltage range from

6 to 61 V so that you have new possibilities to applicate the Raspberry Pi (car,

ship, truck, industrial plant etc.). Furthermore, the Raspberry Pi

receives optionally an upgrade of the USB outputs to a high power USB

output to operate power-intensive devices for examples USB-hard disks

without any restrictions.

The integrated USV-function enables the safeguarding of critical

applications against power failures. Via soware for the Raspberry Pi, it is

possible to monitor the USV-function and to mail dierent reports via e-mail

in case of a failure. Due to the used eicient solution for switching

regulators, it allows the Raspberry Pi to operate as a portable device via a

battery.

useful expansion of the USV-mode: Aer the Raspberry is shut down at a

power failure by the StromPi, the new reset- function restarts the Raspberry

Pi automatically if the main voltage source is available again.

intended use: The expansion board to connect a compatible single board

computer (e.g. Raspberry Pi)with a voltage source from 6 to 61 V so it can

operate with this power.

warning: At a heavy load, the StromPi can heat up. Do not touch the

board during use to prevent burn injuries - enable a solid air

supply to enclude the overheating of the device.

3. OPERATING MODES

2. PIN ASSIGNMENT

high-power

USB output

Data input (for high-

power USB output)

and current output

microUSB (5 V)

voltage input

(primary)

2. mode

switch

wide-range (6 - 61 V)

voltage input

(secondary)

reset - switch

GPIO - port

1. mode switch

(USV | Wide) T - PIN

The StromPi 2 has 2 operating modes UPS and Wide operation which are

explained in the following.

UPS-mode

The UPS-mode operates especially battery-saving. The wide range voltage

source is only charged in standby with . This standby power 20 - 80 µA

consumption is is very low so that the maintenance cycles of possible

bypass batteries / batteries can be accordingly long.

For one year of a standby operation, this circuit takes for example from

175 mAh to 700 mAh out of the wide range voltage source.

Product specificaties

Merk:	Joy-it
Categorie:	Niet gecategoriseerd
Model:	RB-STROMPI2
Gewicht:	28 g
Breedte:	65 mm
Diepte:	56 mm
Hoogte:	15 mm
Compatibiliteit:	Arduino/Raspberry Pi
HDMI in:	1
Type product:	Uitbreidingskaart