Joy-it RB-Case+19 Handleiding

Joy-it Niet gecategoriseerd RB-Case+19

Lees hieronder de 📖 handleiding in het Nederlandse voor Joy-it RB-Case+19 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

RB-CASE+19

Transparent tower case for Raspberry Pi

1. GENERAL INFORMATION

Dear customer,

thank you for choosing our product. in the following, we will show you how

to use your product.

Should you encounter any unexpected problems during use, please do not

hesitate to contact us.

This case is perfect for all maker and handicra enthusiasts because it

protects the Raspberry during experiments and test setups.

2. ASSEMBLY

First of all, you should remove the protective lm from both sides gently.

Aer that four synthetic spacers must be pinned and attached with synthetic

nuts.

Now you can apply the Raspberry Pi on the spacers and screw it tight with

four synthetic screws.

First of all, screw together the base plate (plate with wall mount) and the

spacers with threads. You should use the spacers with threads that you can

add the next plate on top of the other.

Repeat the previous steps as oen as the number of Raspberry Pis you wish

to install in the case.

Product specificaties

Merk:	Joy-it
Categorie:	Niet gecategoriseerd
Model:	RB-Case+19
Kleur van het product:	Gold, Silver, Transparent
Gewicht:	226 g
Breedte:	202 mm
Diepte:	104 mm
Hoogte:	75 mm
Materiaal:	Acrylglas
Compatibiliteit:	Raspberry Pi
Type product:	Opbergtas