Joy-it COM-SD-NAND512 Handleiding

Joy-it Niet gecategoriseerd COM-SD-NAND512

Lees hieronder de đź“– handleiding in het Nederlandse voor Joy-it COM-SD-NAND512 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
MICRO SD BREAKOUT BOARD-
COM NAND512-SD-
1. GENERAL INFORMATION
Dear customer,
thank you very much for choosing our product.
In following, we will introduce you to what to observe while starting up
and using this product.
Should you encounter any unexpected problems during use, please do
not hesitate to contact us.
2. USE WITH THE ARDUINO
2.1 Wiring
Connect your SD module to your Arduino as shown in the diagram and
table below.
Arduino Module SD-
5 V VIN
GND GND
13 SCK
12 MISO
11 MOSI
4 CS
2.2 Library installation
To install the required library, open the library manager in your Arduino
IDE under Sketch -> Include Library -> Manage Libraries....
There enter SD in the search field and install the library SD by Arduino,
SparkFun


Product specificaties

Merk: Joy-it
Categorie: Niet gecategoriseerd
Model: COM-SD-NAND512

Heb je hulp nodig?

Als je hulp nodig hebt met Joy-it COM-SD-NAND512 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Joy-it

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd