Joy-it JT-HD35 Handleiding
Joy-it
Niet gecategoriseerd
JT-HD35
Bekijk gratis de handleiding van Joy-it JT-HD35 (7 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 127 mensen en kreeg gemiddeld 4.4 sterren uit 64 reviews. Heb je een vraag over Joy-it JT-HD35 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/7
JT-HD35
USB load resistance
1. GENERAL INFORMATION
Dear customer,
thank you for choosing our product. In the following, we will show you how
to use your product.
Should you encounter any unexpected problems during use, please do not
hesitate to contact us.
This USB load resistance suits perfectly for example to test how much power
your USB charging unit really has. The load resistance can be powered with
up to 35 W. The current can be adjusted with a built-in trimmer.
On the LCD display, the current current is shown. With the help of the
buttons, the load can be switched on and o.
Moreover, the load resistance is capable to simulate and to recognize
automatically dierent charging electronics (QC2.0( 5 V, 9 V, 20 V), QC3.0,
FCP, AFC 9 V).
2. TECHNICAL DETAILS
operating voltage 4 - 25 V
operating current 0.25 - 5 A
power
display mode
35 W
4 digit
segment display
fan speed 8000 RPM ± 10 %
connections USB2.0, micro-USB,
USB Typ-C
dimensions 81 x 41 x 28 cm
weight 52 g
3. PIN ASSIGNMENT
USB 2.0
USB - C
micro-USB
Aluminium
heatsink
Fan
LED segment
display
Set / - button
QC3.0 LED
FCP LED Trigger button
QC2.0 LED
OK / + button
Potentiometer
4. FUNCTIONS
1. Functions for protection:
OVP (over voltage protection): over voltage protection by 25 to 30 V,
the LED display shows “OVP“ like the picture below.
OTP (over temperature protection): with a temperature of over 80 °C
the LED display shows “OTP“.
OPP (over power protection): With a power of over 35 W the
LED display shows “OPP“.
Aer the load is in the protection mode, you have to set the
recovery mode for the output.
Display of voltage, current and power
Intelligent fan, with a power of 10 W or a temperature of 40 °C the
fan starts automatically to cool the device
Precise multiloop potentiometer to adjust the current accurately up
to 0.01 A.
You can set the standard start status freely.
2. Trigger function:
The device can trigger QC2.0, QC3.0, Huawei FCP, Samsung AFC 9V
and other quick charger modes.
3. Detection of quick charger function :
You can use the Auto mode to identify if your quick charger has the
quick charger function.
4. Power-On automatic trigger function:
With this function you can trigger the quick charger aer the start
of the device and activate the load automatically. It suits either for
batch tests by older charging units.
Product specificaties
| Merk: | Joy-it |
| Categorie: | Niet gecategoriseerd |
| Model: | JT-HD35 |
Heb je hulp nodig?
Als je hulp nodig hebt met Joy-it JT-HD35 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Joy-it
15 Juni 2025
7 April 2025
7 April 2025
30 Januari 2025
28 Januari 2025
28 Januari 2025
14 Januari 2025
4 December 2024
4 December 2024
18 November 2024
Handleiding Niet gecategoriseerd
- Casa Deco
- HVMLAK
- Intellinet
- Electro-Voice
- Somfy
- Ordex
- Matterport
- NUX
- Lego
- Braun Phototechnik
- Kicker
- CaterRacks
- Gill
- ProUser
- Swedish Posture
Nieuwste handleidingen voor Niet gecategoriseerd
1 Juli 2025
1 Juli 2025
1 Juli 2025
1 Juli 2025
1 Juli 2025
1 Juli 2025
1 Juli 2025
1 Juli 2025
1 Juli 2025
1 Juli 2025