Joy-it COM-ZY12PDN Handleiding


Bekijk gratis de handleiding van Joy-it COM-ZY12PDN (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 25 mensen en kreeg gemiddeld 4.9 sterren uit 13 reviews. Heb je een vraag over Joy-it COM-ZY12PDN of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/4
USB PD TRIGGER MODULE-
COM ZY12PDN, COM- -ZY12PDN-ST and COM ZY12PDN- -USB
1. GENERAL INFORMATION
Dear customer,
Thank you for purchasing our product. In the following, we will show you
which things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to
contact us.
All three items have the same circuit board and dier only in the output
interface.
When using the modules, make sure to use a suicient cable
cross section.-
To use the modules as intended, you need a USB-PD-capable power
supply unit.
2. OUTPUT INTERFACES
COM ZY12PDN-
COM ZY12PDN- -ST
-
+
COM ZY12PDN USB- -
-
+
3. OPERATION
Connect your USB PD trigger module to a USB PD capable power supply - -
using the USB C connector. These modules provide you with dierent -
voltage modes, which are indicated by the LED. The mode can be
changed by pressing the button.
Colour Voltage modes
5 V
9 V
12 V
15 V
20 V
Maximum possible voltage
Runs through all modes
(one per second)
To set the modes as default, first plug the board into your power supply
while holding down the button on the board. Now the LED will start
flashing colourfully. Now you can select the desired mode using the
button. Now press and hold the button to confirm your selection. Finally,
disconnect the power supply from the module and then reconnect it so
that the module now starts directly in this mode.


Product specificaties

Merk: Joy-it
Categorie: Niet gecategoriseerd
Model: COM-ZY12PDN
Breedte: 31 mm
Diepte: 15 mm
Hoogte: 4 mm
Stroom: 5 A
Vermogensverbruik (max): 100 W
Ingangsspanning: 5 - 20 V
Number of devices supported: 1

Heb je hulp nodig?

Als je hulp nodig hebt met Joy-it COM-ZY12PDN stel dan hieronder een vraag en andere gebruikers zullen je antwoorden